• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.59-69
• /
• 1992

In order to predict the distribution of chemical species of copper and cadmium in water, conditional stability constant and complexation capacity between copper or cadmium and natural aquatic sediment have been determined in a shallow lake in Haman, Kyungnam. Kinetic parameters were calculated by Langmuir isotherm equation. Conditional stability constant was log $K_{cuSed}=4.78 and log K_{cdSed}=4.45$. Complexation capacity was $1.70{\times}10^{-4}$moles/g for copper and $5.54{\times}10^{-5}$moles/g for cadmium. Accuracy of experimental values of conditional stability constant was checked by comparing the calculated concentration of the metals with the measured one. Relatively good agreement between these values was obtained. Relative errors were 8.9% for copper and 6.5% for cadmium. Data of the measured conditional stability constant were put into data base of MINEQL computer program, and concentration of various chemical species of copper and cadmium in a model aquatic system was calculated. Aquatic sediment was associated with copper at the concentration of $10^{-5M}(0.059g/\ell)$10-5M(0.059g/l) and with cadmium at the concentration of $10^{-6M}(0.018g/\ell)$, and it significantly influenced on the distribution of chemical species of the metals. This result showed that prediction of chemical species of the heavy metals in an aquatic system should be taken into account the influence of the sediment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.209-216
• /
• 1991

Characteristics of suspended sediment concentration of equilibrium and non-equilibrium state caused by waves and currents are investigated by conducting a movable bed experiments in wave tanks. In the region where a downward flux of suspended sediment is larger than a upward flux, time-averaged vertical distribution of suspended sediment does not indicate logarithmic distribution. A new numerical procedure for predicting time-averaged suspended sediment concentration is also proposed based on two-dimensional advective diffusion equation by applying a split-operator approach. It is found that the unposed procedure can predict measured distribution of suspended sediment satisfactorily.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.127-136
• /
• 1996

The purpose of this study is to provide with information for the water resources development and management in stream management planning, such as information on the sediment trensport, design of dam and water facilities, river improvement and flood plains management. The major results obtained from the field measurement and analysis of the watershed characteristics, hydraulic and sediment characteristics are as follows ; 1. The rating curve formulas obtained from the analysis of the hydraulic characteristics data collected are ; Q-=110.563 $(H-0.474)^2$ for 0.7m$(H-0.146)^2$ for 0.4m$Sr=aX{^2} {_1} X^{c}{_2}$, in the experimental watershed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.1
• /
• pp.33-38
• /
• 2003

Turbidity meter calibrations were conducted using bottom sediment and suspended material collected with a vertical array of sediment traps at the coastal water off Gaduk Island. Compared to the bottom sediment comprising sand fraction of approximately 6％, trapped suspended material was composed entirely of silt and clay fractions and showed a tendency to get finer as elevation from the sea-bed increases. Slope parameter of linear regression due to bottom sediment was of minimum value and values of those due to suspended material increased gradually as the height of sediment trap increases (i.e., sediment size decreases). This result shows that turbidity meter calibration using bottom sediment can cause an overestimation error in the calculation of suspended sediment concentration and that the error can reach up to 25% in case of this study. Therefore, it is suggested that the use of a corrected calibration curve based on grain size distribution of suspended material instead of bottom sediment may reduce the measurement error of suspended sediment concentration.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.607-616
• /
• 2021

The purpose of this study is to simulate the transport of nonuniform sediment considering the hiding-exposure effect numerically. In order to calculate the transport of multi-disperse suspended sediment mixtures, the set of advection-diffusion equations for each particle class is solved. The applicability of the numerical model is examined by comparing the simulation results with experimental data. In this study, we calculate the vertical distribution of total concentration of sediment particles using two approaches: (1) by considering the mixture as represented by a single size; and (2) by combining the concentration of the sediment corresponding to several particle size classes; From the simulation results, it is shown that both approaches calculate reasonable results due to the narrow range of size distribution. Under the condition of nonuniform sediment, the critical shear stress of the sediment particle is influenced by the size-selective entrainment, i.e., hiding-exposure effect. It is shown in this study that the effect of hiding-exposure effect on the erosion rates of fine sand is negligibly small.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.483-491
• /
• 2009

In this study, a jetty construction is taken into account for the reduction of sediment diffusive concentration incoming from the upstream river due to the urbanization and industrial development and to minimize the effects on the coastal ecosystems. The field observation and numerical calculation are conducted to analyze the diffusion zone of sediment concentration in the small estuary and coastal area. The specification of the installed jetty which is able to control the sediment concentration was decided based on the prediction of the dispersion area changes in space and time. The selected size and layout for the jetty design were examined for the dispersion zone by numerical calculation and field observation. As a result, the jetties constructed in the estuary retarded the dispersion rate of sediment concentration, so that the effect area of sediment dispersion was obviously decreased. In addition, the measured field data indicated that the sediment deposition in the inside of dikes could be controlled and the right side area of jetties could be preserved without influx sediment diffusion.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.51-55
• /
• 2001

The pollution characteristics of water quality analysis and the heavy metal analysis of river sediment in the Western Nakdong river, and then a commercial tile using the polluted sediment was produced. The analytical results of the riverbed structure and the depth distribution in the Western Nakdong river were that Macdo Stream(site 2) was the deepest(13 ft). The analytical result of water quality showed that BOD was the highest in the Hogei Stream(site 6); COD, Syanduengchi Island(site 1);SS, Macdo Stream(site 2);T-N, Suanduengchi Island(site 1);T-P, Macdo Stream(site 2). Therefore the deeper the site was the higher the pollution concentration was. The result of heavy metal analysis of the river sediment was that Pb and Cr were the highest in Kangdong Bridge(site 9); Cd, Macdo Stream(site 2), so the deeper the site was the higher the pollution concentration was. The production of tile using the mixure of the polluted sediment and the raw material was successful, so the reuse of polluted sediment was possible.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2004

The fate and transport mechanism of pollutants which have affinities to particles, such as trace metals and some petroleum product based compounds, can be effectively explained by the movement of sediment. The sediment release from lands to adjacent water bodies due to rainfall events was investigated in an effort to predict the total suspended solids (TSS) concentrations in runoff. The contribution of sediment from land origin to the river TSS can be better understood by the relationship between TSS concentration and particle size in runoff. The sieve analysis was used to determine the particle size distribution and these results were incorporated into statistical models. The critical size of particles was set to $74{\mu}m$ which contributes to the river TSS concentration since fine particles (wash load) of the sediment in the runoff play the key role in constituting TSS in a water column of the river. Empirical relationships were developed to predict TSS in runoff from the percentage of the critical particle size and were proven statistically to be valid.