• 한국환경과학회지
• /
• 제1권2호
• /
• pp.59-69
• /
• 1992

In order to predict the distribution of chemical species of copper and cadmium in water, conditional stability constant and complexation capacity between copper or cadmium and natural aquatic sediment have been determined in a shallow lake in Haman, Kyungnam. Kinetic parameters were calculated by Langmuir isotherm equation. Conditional stability constant was log $K_{cuSed}=4.78 and log K_{cdSed}=4.45$. Complexation capacity was $1.70{\times}10^{-4}$moles/g for copper and $5.54{\times}10^{-5}$moles/g for cadmium. Accuracy of experimental values of conditional stability constant was checked by comparing the calculated concentration of the metals with the measured one. Relatively good agreement between these values was obtained. Relative errors were 8.9% for copper and 6.5% for cadmium. Data of the measured conditional stability constant were put into data base of MINEQL computer program, and concentration of various chemical species of copper and cadmium in a model aquatic system was calculated. Aquatic sediment was associated with copper at the concentration of $10^{-5M}(0.059g/\ell)$10-5M(0.059g/l) and with cadmium at the concentration of $10^{-6M}(0.018g/\ell)$, and it significantly influenced on the distribution of chemical species of the metals. This result showed that prediction of chemical species of the heavy metals in an aquatic system should be taken into account the influence of the sediment.

• 한국해안해양공학회지
• /
• 제3권4호
• /
• pp.209-216
• /
• 1991

파랑과 흐름이 공존하는 영역에서의 부유사이동특성, 특히 농도분포형상 및 확산계수, 기준점농도에 미치는 흐름의 영향에 대하여 정량적인 평가를 시도하였다. 또한, 비정상이류확산방정식에 기반한 고정도수치계산법을 이용하여 평형상태에서의 부유사농도분포 및 지금까지 예측하기 곤란했던 비평형상태의 부유사농도분포의 재현을 시도하여 본 결과, 비교적 만족할만한 재현도를 나타내주었다.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.127-136
• /
• 1996

The purpose of this study is to provide with information for the water resources development and management in stream management planning, such as information on the sediment trensport, design of dam and water facilities, river improvement and flood plains management. The major results obtained from the field measurement and analysis of the watershed characteristics, hydraulic and sediment characteristics are as follows ; 1. The rating curve formulas obtained from the analysis of the hydraulic characteristics data collected are ; Q-=110.563 $(H-0.474)^2$ for 0.7m$(H-0.146)^2$ for 0.4m$Sr=aX{^2} {_1} X^{c}{_2}$, in the experimental watershed.

• 한국해안해양공학회지
• /
• 제15권1호
• /
• pp.33-38
• /
• 2003

가덕도 인근 연안해역에서 채취된 해저 퇴적물과 연직방향으로 배열된 표사포획장치로부터 획득된 부유물질을 이용하여 탁도계 검교정을 수행하였다. 포획된 부유물질은 모래 함량이 약 6%인 해저 퇴적물에 비하여 주로 실트 및 점토로 조성되었으며, 해저면으로부터의 놀이가 증가함에 따라 세립화하는 경향을 보였다. 해저 퇴적물에 대한 탁도계 검교정 선형 회귀식의 기울기는 최소값으로 나타났으며, 수심별로 포획된 부유물질에 의한 선형 회귀식의 기울기는 포획 고도가 증가함(즉, 입도가 감소함)에 따라서 점진적으로 증가하였다. 이러한 결과는 해저 퇴적물에 대한 탁도계 검교정 결과로부터 부유물질 농도를 환산할 경우 과대추정의 오차가 발생되며, 본 연구해역의 경우에는 그 오차가 최대 25％까지 증가할 수 있다는 것을 보여준다. 따라서 해저 퇴적물보다는 수층에서 포획된 부유물질의 입도분포를 고려하여 보정된 검교정식을 적용하는 것이 부유물질 농도의 측정오차를 최소화하는 방법으로 사료된다.

• 한국수자원학회논문집
• /
• 제54권8호
• /
• pp.607-616
• /
• 2021

본 연구는 가는 모래로 이루어진 하상으로부터 침식된 부유사의 농도분포 계산결과에 차폐효과가 미치는 영향을 살펴보는 것을 목적으로 수행되었다. 하상재료의 입도분포를 고려하여 침식율을 산정할 수 있는 유사이동 모형을 개발하였으며, 측정자료와의 비교를 통해 수치모형의 적용가능성을 검토하였다. 수치모의결과로부터 하상재료 입도분포의 기하표준편차가 1.5보다 작은 경우 차폐효과가 부유사 농도의 연직방향 분포 계산결과에 미치는 영향은 매우 작은 것으로 나타났다. 또한 기하표준편차가 1.5이하인 가는 모래로 이루어진 하상으로부터 침식된 유사 농도를 계산하는 경우, 균일사로 가정 후 대표입경을 바탕으로 농도를 산정하여도 합리적인 결과가 얻어지는 것으로 확인되었다.

• 대한토목학회논문집
• /
• 제29권5B호
• /
• pp.483-491
• /
• 2009

본 논문은 상류지역의 개발로 인해 발생하는 토사가 우수 시에 하천을 통하여 하구로 유입되면서 유입토사의 확산이 발생하여 하구의 우안에 서식하는 해안의 생태계에 영향을 미치고 있기 때문에 이를 최소화하기 위해 토사확산을 제어할 수 있는 도류제를 설치하고자 하였다. 토사확산의 영역을 수치계산과 현장실측으로 검증한 것이다. 도류제의 설치유무에 따라 확산영역의 변화와 토사의 농도를 검토하였다. 모델하구에 도류제를 설치할 경우는 유입파랑을 차단하므로 인해 홍수량의 유출이 원만하게 발생되어 수심이 깊은 곳 까지 유속이 발생되어 수심이 얕은 지역에 대해서 확산범위도 감소되었고 동시에 이 지역에 대해 토사확산 농도가 감소되었다. 이는 도류제 시공후의 현장관측에 의해서도 도류제 내부의 유입토사의 제어로 인해 우안 도류제의 외곽부분은 토사농도가 감소되고 있음을 확인하였다.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.51-55
• /
• 2001

The pollution characteristics of water quality analysis and the heavy metal analysis of river sediment in the Western Nakdong river, and then a commercial tile using the polluted sediment was produced. The analytical results of the riverbed structure and the depth distribution in the Western Nakdong river were that Macdo Stream(site 2) was the deepest(13 ft). The analytical result of water quality showed that BOD was the highest in the Hogei Stream(site 6); COD, Syanduengchi Island(site 1);SS, Macdo Stream(site 2);T-N, Suanduengchi Island(site 1);T-P, Macdo Stream(site 2). Therefore the deeper the site was the higher the pollution concentration was. The result of heavy metal analysis of the river sediment was that Pb and Cr were the highest in Kangdong Bridge(site 9); Cd, Macdo Stream(site 2), so the deeper the site was the higher the pollution concentration was. The production of tile using the mixure of the polluted sediment and the raw material was successful, so the reuse of polluted sediment was possible.

• 상하수도학회지
• /
• 제26권1호
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.

• 상하수도학회지
• /
• 제18권1호
• /
• pp.22-28
• /
• 2004

The fate and transport mechanism of pollutants which have affinities to particles, such as trace metals and some petroleum product based compounds, can be effectively explained by the movement of sediment. The sediment release from lands to adjacent water bodies due to rainfall events was investigated in an effort to predict the total suspended solids (TSS) concentrations in runoff. The contribution of sediment from land origin to the river TSS can be better understood by the relationship between TSS concentration and particle size in runoff. The sieve analysis was used to determine the particle size distribution and these results were incorporated into statistical models. The critical size of particles was set to $74{\mu}m$ which contributes to the river TSS concentration since fine particles (wash load) of the sediment in the runoff play the key role in constituting TSS in a water column of the river. Empirical relationships were developed to predict TSS in runoff from the percentage of the critical particle size and were proven statistically to be valid.