• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.47-54
• /
• 2018

Sediment disaster happen frequently in our country every year, and a lot of lives and the properties have been lost because of them. Non-structural measures for prevention of sediment disaster have been introduced by prefectures based on the Sediment-related Disaster Prevention Law established after the devastating rainstorm damage in Hiroshima in 1999. They include formulation of sediment disaster warning and evacuation standard rainfall and designation of sediment disaster warning zones and sediment disaster special warning zones. As a practical example, this research focused on the case of "TEC-FORCE" of "MLIT of Japan" as a method of utilizing professional workforce and the sediment disaster warning information delivery system in Kagoshima. In the future, it will be called for prevention and reduction of damages by utilizing professional workforce and sediment disaster response system such as Japan.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.252-257
• /
• 2005

The study on long-term change of natural and sediment disasters such as landslides and debris flows is not thoroughgoing enough in spite of increasing of concern for disaster. Therefore, the change of natural and sediment disasters was investigated with the number of victims caused by both disasters and the ratio of sediment disasters for natural disasters was compared. The number of victims by sediment and natural disasters has apparently been decreasing despite of the change of rainfall pattern. The number of victims was changed to 140 persons/year in the late 1990s from 250 persons/year in the 1970s of natural disaster and that of sediment disaster to 20 persons/year in the late 1990s from 60 persons/year in the late 1970s. Furthermore, the ratio of sediment disaster victims to natural disaster victims has decreased from 2/7 in the 1970s to 2/15 after 1980s. But, the system of sediment disaster management and new soil erosion control works tough introduction of watershed management concept are requested because of increased landslide area in recent years (206ha in 1981 $\rightarrow$ 688ha in 1999).

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.201-210
• /
• 2017

Recently, as a part of measures against large-scale natural disasters in Korea, disaster prevention matters are strengthened in urban planning. With the introduction of the disaster vulnerability analysis system, plans for disaster prevention are being reinforced in urban planning. However, there are many problems to be solved at the stage of operation and practical application of the law. When disasters occur, we are focusing on response and recovery plans. Therefore, it is not enough to construct a comprehensive disaster prevention system to prevent disasters in advance. The established disaster prevention plan is difficult to plan management centered on disaster prevention due to factors such as economic efficiency, convenience, and comfort. This study is a basic study for supporting disaster prevention mitigation plan. For this purpose, the analysis of the actual situation of disaster prevention plan at home and abroad and improvement plan were derived. ased on these improvement plans, we have developed a method to apply the element technology of urban design to the test bed to reduce sediment disaster. The test bed was investigated and examined in the disaster hazard area of Busan and Seongnam city. And the defense technology is applied to the selected site, and the basis of the disaster prevention plan and design is proposed. If the proven techniques are reflected from the urban planning stage, it will be possible to contribute to the mitigation of sediment disaster caused by the city.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.1
• /
• pp.59-74
• /
• 2016

The collapses of retaining walls or embankments, the soil erosion and landslides around urban areas are occurring by heavy rainfalls because of the recent climate change. This study conducts the soil erosion modeling, while applying the spatial information such as soil maps, DEM and landcover maps to the RUSLE model. Especially this study draws up the soil erosion grade map and the unit soil erosion grade map by parcels through coupling the soil erosion with the cadastral map, and by that can calculate the number of parcels by soil erosion grades. Also the sediment disaster information system based on the mobile GIS is developed to identify the soil erosion grades of site in the urban plannings and the construction fields. The sediment disaster information system can identify the present conditions of the registers of lands, buildings and roads, and confirm the RUSLE factors, the soil erosion, the sediment disaster grades by parcels. Also it is anticipated that this system can support the sediment disaster work of site effectively through searching the locations and attributes of the specific parcels by Administrative Dong and the soil erosion grades.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.113-120
• /
• 2008

It is difficult to acquire good-quality fill material for levee in field and it is the most important factor of levee construction technology to use the bed sediment for the safe and economic construction. So, it is necessary to evaluate geotechnical characteristics of bed sediment, design and construction method through field application tests. In this study geotechnical characteristics of Hyunpoong bed sediment (SP) in Daegu were analyzed, and laboratory/field compaction test for mixing granite weathered soil (SW) was performed. And field mixing method was suggested.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.47-57
• /
• 2017

In this study, a predictive analysis was conducted on sediment disaster hazard area by selecting six research areas (Chuncheon, Seongnam, Sejong, Daejeon, Miryang and Busan) among the urban sediment disaster preliminary focus management area. The models that were used in the analysis were the existing models (SINMAP and TRIGRS) that are commonly used in predicting sediment disasters as well as the program developed through this study (LSMAP). A comparative analysis was carried out on the results as a means to review the applicability of the developed model. The parameters used in the predictions of sediment disaster hazard area were largely classified into topographic, soil, forest physiognomy and rainfall characteristics. A predictive analysis was carried out using each of the models, and it was found that the analysis using SINMAP, compared to LSMAP and TRIGRS, resulted in a prediction of a wider hazard zone. These results are considered to be due to the difference in analysis parameters applied to each model. In addition, a comparison between LSMAP, where the forest physiognomy characteristics were taken into account, and TRIGRS showed that similar tendencies were observed within a range of -0.04~2.72% for the predicted hazard area. This suggests that the forest physiognomy characteristics of mountain areas have diverse impacts on the stability of slopes, and serve as an important parameter in predicting sediment disaster hazard area.

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.161-169
• /
• 2017

In this study, sediment transfer and precipitation analysis of the test bed watershed was conducted through the model for the application and practical use of the urban sediment disaster prevention technology, and used this as an aid to design to secure reliability. In addition, conducted the test bed monitoring with the defense technology, analyzed the effect, and established the maintenance plan. Analyzed the change of soil deposition volume through arbitrary slope adjustment for the currently installed stormwater conduit of the test bed watershed. As a result, it is important to reduce the total sedimentation amount in the adjustment of the slope of the entire pipeline, but it is important that the sedimentation depth of each sediment does not rise to such a degree as to threaten the performance of the pipeline. Considering these matters, it is necessary to design the pipeline to prevent the clogging of the soil from the viewpoint of the reliability of the entire pipeline. The sediment disaster defense technology test bed is divided into a new city and an old city, and old city test bed is under construction. The result obtained through the monitoring of the test bed in the new city, sediment disasters such as debris can delay the time to reach the downtown area, and it is possible to secure the golden time, such as evacuation and rescue through the warning system. Also, the maintenance of the test bed application was suggested. Continuous and systematic monitoring is required for securing the reliability of element technology and successful commercialization.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.586-593
• /
• 2020

Purpose: This study aims to develop an algorithm for predicting sediment discharge by debris flow, and develop GIS-based decision support system for optimal arrangement of check dam. Method: The average stream width and flow length were used to predict the cumulative sediment discharge by debris flow. At this time, the amount of slope failure on source area and average flow length were utilized as input factors. Result: The predicted sediment discharge calculated through the algorithm was 1.1 times different on average compared to the actual sediment discharge by debris flow. In addition, the program is an objective indicator that selects the location and size of the check dam, and it can help practitioners make rational decisions. Conclusion: The soil erosion control works are being implemented every year. Therefore, it is expected that the GIS-based decision support system for location and size of the check dam will contribute to the prevention of sediment-related disasters.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.1
• /
• pp.35-46
• /
• 2022

In this study, the amount of debris flow was calculated through the empirical equations of RUSLE, NILIM, and Marchi, which are widely used to calculate areas affected by debris flow, and debris flow measured through precise measurements and field surveys was compared. The RUSLE method over estimated by 2.13 times in the average sense compared with the measured sediment quantify and Marchi's empirical equation over estimated by 2.83 times while NILIM's empirical equation 1.26 times, which is the lowest error among the three empirical equation.