• 한국수자원학회논문집
• /
• 제54권8호
• /
• pp.607-616
• /
• 2021

본 연구는 가는 모래로 이루어진 하상으로부터 침식된 부유사의 농도분포 계산결과에 차폐효과가 미치는 영향을 살펴보는 것을 목적으로 수행되었다. 하상재료의 입도분포를 고려하여 침식율을 산정할 수 있는 유사이동 모형을 개발하였으며, 측정자료와의 비교를 통해 수치모형의 적용가능성을 검토하였다. 수치모의결과로부터 하상재료 입도분포의 기하표준편차가 1.5보다 작은 경우 차폐효과가 부유사 농도의 연직방향 분포 계산결과에 미치는 영향은 매우 작은 것으로 나타났다. 또한 기하표준편차가 1.5이하인 가는 모래로 이루어진 하상으로부터 침식된 유사 농도를 계산하는 경우, 균일사로 가정 후 대표입경을 바탕으로 농도를 산정하여도 합리적인 결과가 얻어지는 것으로 확인되었다.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1333-1337
• /
• 2002

A significant fraction of nutrients, such as nitrogen and phosphorus released from sediment are utilized by primary production in the shallow water of coast and lake. The purpose of this study is to introduce the mechanism of nutrients release from sediment and to introduce the methods of the measurement of nutrient released from sediment. One approach is to calculate nutrients released from sediment by a concentration gradient between sediment pore waters and overlying water based on the Fick's law. The other approaches of measurement are the undisturbed sediment core experiments and measurement of nutrient released from sediment by the in situ chamber equipment.

• 한국수자원학회논문집
• /
• 제47권12호
• /
• pp.1121-1134
• /
• 2014

유사발생 잠재성 및 토양침식으로 인한 유사발생 위험성이 높은 것으로 평가된 내성천유역을 대상으로 강우-유출-토양침식-유사이송으로 이어지는 유역단위의 분포형 모형을 구축하였으며 유출과 유사농도 모의 결과에 주요한 영향을 미치는 조도계수 및 투수계수의 민감도 분석을 실시하였다. 모의결과, 내성천유역의 토지 피복이 숲인 지역의 조도계수를 0.4에서 0.45로 변경하여 지표수 유출 유속을 감소시킴으로써 향석 지점에서의 유출곡선에 미치는 영향을 분석하였으나 유출수문곡선의 변화에 영향을 미치지 않는 것으로 나타났으며 평균 유사농도 값과 유사농도의 범위에 있어서도 모의 결과가 근소하게 증가하나 유의한 변화는 없는 것으로 나타났다. 투수계수에 대한 민감도 분석 결과, 투수계수 값을 저감 시킬수록 총 유출량 및 첨두 유출량은 점차 증가하는 것으로 나타났다. 유사농도 모의의 경우에도 투수계수를 저감시킬수록 모든 지점에서 평균 유사농도 및 유량에 따른 유사농도 범위가 증가하였으며, 향석 지점의 경우 투수계수를 50% 저감하였을 때 유사 농도 모의 값이 유량-유사량 관계식에 의해 계산된 값과 가장 근사한 것으로 나타났다.

• 한국항해항만학회지
• /
• 제27권4호
• /
• pp.455-463
• /
• 2003

저질의 부유 현상이 일련의 쇄파라고 하는 파동 현상에 어떠한 형태로 연동하는가를 면밀히 조사하기 위하여 현지해안의 쇄파대내에 주 관측지점을 설치하고 부유사 농도와 유속, 수위변동 등의 관련 파랑 제원을 계측하였다. 분석을 위해 수위변동, 유속변동치의 부유사 농도에 대한 상관관계를 조사하였으며, 상관이 탁월한 주기대에 대한 ensemble 평균 분석으로 유속 및 수위변동의 위상에 따른 부유사 농도의 변화와의 관계를 명백히 하여 다음의 결론을 얻었다. 1) 부유사의 농도 변동은 유속 및 수위변동의 에너지가 가장 큰 장주기 성분(100s)에 있어서 보다 오히려, 관측지점이 절(node)이 되는 1차mode의 장주기중복파(60s) 및 배(anti-node)가 되는 2차 mode의 중복파(30s)의 주기성분에서 상관이 높았으며, 2)또한, 1차 mode의 장주기중복파의 유속 성분이 해안으로 향하여 가속하는 위상 즉, 수면 경사가 상대적으로 해안선측보다 외해측이 높은 위상에서 부유사 농도가 가장 높아짐을 명백히 하였다.

• 한국해안해양공학회지
• /
• 제3권4호
• /
• pp.209-216
• /
• 1991

파랑과 흐름이 공존하는 영역에서의 부유사이동특성, 특히 농도분포형상 및 확산계수, 기준점농도에 미치는 흐름의 영향에 대하여 정량적인 평가를 시도하였다. 또한, 비정상이류확산방정식에 기반한 고정도수치계산법을 이용하여 평형상태에서의 부유사농도분포 및 지금까지 예측하기 곤란했던 비평형상태의 부유사농도분포의 재현을 시도하여 본 결과, 비교적 만족할만한 재현도를 나타내주었다.

• 한국농공학회논문집
• /
• 제57권4호
• /
• pp.31-38
• /
• 2015

This study aims to assess the effectiveness of limestone, zeolite, and crushed concrete as capping material to block the release of heavy metals (As, Cu, Cr, Ni, and Pb) and reduce the sediment oxygen demand. The efficiency of limestone, zeolite, and crushed concrete was evaluated in a reactor in which a 1-cm thick layer of capping materials was placed on the sediments collected from Inchon north harbor. Dissolved oxygen concentration and heavy metal concentration in seawater above the uncapped sediments and capping material were monitored for 17 days. The sediment oxygen demand was in the following increasing order: crushed concrete ($288.37mg/m^2{\cdot}d$) < zeolite ($428.96mg/m^2{\cdot}d$) < limestone ($904.53mg/m^2{\cdot}d$) < uncapped ($981.34mg/m^2{\cdot}d$). The capping materials could reduce the sediment oxygen demand by blocking the release of biochemical matters consuming dissolved oxygen in seawater. It was also shown that zeolite and crushed concrete could effectively block the release of Cu, Ni, and Pb but those were not effective for the interruption of As and Cr release from marine contaminated sediments.

• 한국환경보건학회지
• /
• 제20권4호
• /
• pp.17-35
• /
• 1994

This study was performed to investigate and assess the heavy metal contamination of sediment in main stream and tributaries of the Han-river in the vicinity of Seoul. Sediment were sampled at eight locations of main stream and eighteen locations of tributaries in the spring, summer, and fall in 1993. Six heavy metals of Cd, Cu, Pb, Zn, Cr, and Hg, were assessed. For an assessment of heavy metal contamination in sediment, the assessment method of Hakanson was modified to estimate for Han-river, then classification method of Muller in sediment quality was applied. For an assessment of contamination in each heavy metal, Contamination factor C$_f^i$ which was defined the ratio of concentration of i heavy metal in investigated location to background concentration of i heavy metal in uncontaminated upper area was used. The sediment quality in each heavymetal was classified as follows if C$_f^i$<1, Class I for Non contamination, if 1 < C$_f^i$ < 3, Class II for Low contamination, if 3< C$_f^i$ <6, Class III for Moderate contamination, if 6< C$_f^i$ <12, Class IV for Considerable contamination, and if C$_f^i$ > 12, Class V for High contamination.(abbreviation)

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.771-778
• /
• 1996

The sediment in the highly contaminated Gamjeon brook was collected, mixed with the raw material of the tile, and then the commercial tile was produced using the mixture. The concentrations of the heavy metals in the mixture-before and after the tile was produced-were analyzed and the effects of the acid solution on the produced tile were examined. The production of the tiles was successful and the result of heavy metal analysis showed that the concentration of Fe was the highest and that of Cd was the lowest The amount of heavy metal in the sediment - the raw material of the tile mixture was more than that of the produced tile. The elution concentration of the heavy metal by the acid solution(pH : 4 - 7) was low and the quality of the produced tile was better than the commercial tile. The result of this study suggested that the contaminated sediment was removed to produce good tiles, therefore the water pollution and soil pollution were reduced.

• 상하수도학회지
• /
• 제13권2호
• /
• pp.89-94
• /
• 1999

In this study small glass columns with 2.5cm inner diameter and 24.5cm length were used as many as the sample numbers to study the effects of initial pH, temperature, dissolved oxygen concentration, and sediment depth on the release of phosphorus from lake sediment. No phosphorus release occurred at $10^{\circ}C$ with all pHs, and release rate at $25^{\circ}C$ was higher than that at $35^{\circ}C$ with pH 4 and reverse trends were observed at pH 7 and 10. Under all conditions, DO concentrations were decreased and equilibrium was obtained after 4-8 days when phosphorus release started and the Do concentrations were less than 1 mg/l. Sediment depth had little effect on phosphorus release rate. It was found that relation between released SRP(Soluble Reactive Phosphorus) concentration and time was zero order reaction and reaction rate coefficients were obtained. The amount of phosphorus release from lake sediment can be predicted by considering these k values.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.757-766
• /
• 2012

In this study, we have examined concentration distribution and patterns of PCBs in waters, sediments and soils in an agricultural area of South Korea to investigate the relationship between PCBs sources and concentration levels. The concentration of PCBs in water samples were ranged from lower values below detection limit to 8.25 ug/L and the concentration of PCBs in sediment samples were ranged from lower values below detection limit to 76.67 ug/Kg. The concentration of PCBs in soil samples were ranged from lower values below detection limit to 23.51 ug/Kg. These contamination levels were far below the guideline values suggested for environmental quality assessment. The homologue patterns in samples varied from sample to sample, but isomer patterns were very similar with each other. PCB-138 and PCB-153 were predominant congeners in the soil and sediment, which were similar to the results obtained from previous studies. With these results, the assessment of potential sources of PCBs contamination in the sediments of the Nakdong river basin was performed. The principal components were extracted by Principal Component Analysis(PCA). As the result of PCA, it could be expected that PCBs in samples of this study were more affected by PCB products than combustion processes and mostly affected by already-known sources. The PCBs in the soil and sediment samples were related with commercial PCB products.