• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.6
• /
• pp.113-119
• /
• 2009

In recent years, to provide visitors with the various and dynamic services, many ActiveX Controls are developed and distributed in most of the web sites such as e-Government Internet banking Portal in Korea. However, unsecure ActiveX Controls may be critical security threats on Internet User. Although hacking incidents increase sharply for these vulnerable ActiveX Controls, there are not enough national security actions or policies. Thus, in this paper we propose the technical method to design 'Security model for ActiveX Control Managemnet through Security Authentication' to be able safe and useful security management in three aspects of development distribution using.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.425-433
• /
• 2016

In smart grid, enhancement of efficiency and interoperability of electric power system is achieved through the connection with outer network, and this induces that power grid system is threatened increasingly, becomes the main target of cyber terrorism, and is sincerely required to design the secure power system. Although SSDLC(Secure System Development Life Cycle) is used for risk management from the design phase, traditional development life cycle is somewhat limited for satisfaction of information security indicator of power control system. Despite that power control system should reflect control entities of information security considering its own characteristics, validation elements are insufficient to apply into real tasks based on existing compliance. To make design of diagnostic model and assessment process for power control system possible and to give a direction for information security and present related indicator, we propose the new risk management framework of power control system which is applied operational security controls and standard architecture presented by IEC 62351 TC 57 with enterprise risk management framework.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.243-250
• /
• 2016

Recently, with the rise of the mobile device, from mobile devices the user who owns the security, speed up the implementation of the guarantee management environment as businesses and individual equipment for the effcient management of the existing system, but the introduction of the MDM MDM App management features administrators to register the App until you can't prvent the security threat. Therefore, this paper addresses these issues in order to improve the security of your application for the control system. The proposed system is a function of the MDM authentication technology to design analysis, and system architecture to help prevent information disclosure within the design and implementation of Mobile-based application control system. Implementation of the control system to assess the security of the international common criteria security evaluation complete the test scenarios on the basis of the test items. An average of 40% of the test results to verify the results of this enhanced security.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.11-20
• /
• 2018

Smart devices refer to various devices and control equipment such as health care devices, imaging devices, motor devices and wearable devices that use wireless network communication (e.g., Wi-fi, Bluetooth, LTE). Commercial services using such devices are found in a wide range of fields, including home networks, health care and medical services, entertainment and toys. Studies on smart devices have also been actively undertaken by academia and industry alike, as the penetration rate of smartphones grew and the technological progress made with the fourth industrial revolution bring about great convenience for users. While services offered through smart devices come with convenience, there is also various security threats that can lead to financial loss or even a loss of life in the case of terrorist attacks. As attacks that are committed through smart devices tend to pick up where attacks based on wireless internet left off, more research is needed on related security topics. As such, this paper seeks to design an access control method for reinforced security for smart devices. After registering and authenticating the smart device from the user's smart phone and service provider, a safe communication protocol is designed. Then to secure the integrity and confidentiality of the communication data, a management process such as for device renewal or cancellation is designed. Safety and security of the existing systems against attacks are also evaluated. In doing so, an improved efficiency by approximately 44% compared to the encryption processing speed of the existing system was verified.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.1-8
• /
• 2005

This paper formally defines a role-driven security and access control model of a business process in order eventually to provide a theoretical basis for realizing the secured business process management systems. That is, we propose a graphical representation and formal description of the mechanism that generates a set of role-driven security and access control models from a business process modeled by the information control net(ICN) modeling methodology that is a typical business process modeling approach for defining and specifying business processes. Based upon the mechanism, we are able to design and accomplish a secured business process management system that provides an unified resource access control mechanism of the business process management engine domain's and the application domain's. Finally, we strongly believe that the secured access control policies from the role-driven security and access control model can be easily transformed into the RBAC(Role-based Access Control) model that is a standardized security technology for computer and communications systems of commercial and civilian government organizations.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.340-347
• /
• 2001

Security operating system applied to MAC(Mandatory Access Control) or to MLS(Multi Level Security) gives both subject and object both Security Level and value of Category, and it restrict access to object from subject. But it violates Security policy of system and could be a circulated course of illegal information. This is correctly IPC(Interprocess Communication)mechanism and Covert Channel. In this thesis, I tried to design and implementation as OS kernel in order not only to give confidence of information circulation in the Security system, but also to defend from Covert Channel by Storage and IPC mechanism used as a circulated course of illegal information. For removing a illegal information flow by IPC mechanism. I applied IPC mechanism to MLS Security policy, and I made Storage Covert Channel analyze system call Spec. and than distinguish Storage Covert Channel. By appling auditing and delaying, I dealt with making low bandwidth.

• Journal of the Society of Disaster Information
• /
• v.9 no.3
• /
• pp.290-299
• /
• 2013

This study is to present an improvement of security for the National Assembly by survey of persons who use the National Assembly facilities. Most of respondent said that their security consciousness level is above average, and they know National Assembly building is National Major Facility First class but they did not know well what the Major Facility First class is. Many of respondents thought security design of National Assembly building is inadequate, so reinforcement of access control management is necessary. For reinforcement of access control management, security gate and preparing of some obstacles are required. They said that they could put up with inconveniences incurred as a result of reinforcement of access control management, that could be affected positively for the reinforcement. The recognition on the necessity of security education is high, but there is no proper security education program. For practical security education, contents and different method followed by different facilities user should be considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1125-1130
• /
• 2015

In this paper, a method to identify components per unit task system is expressed with node, module, and interface. We define security subject per unit task system and explain node, module, and interface per component. According to the defined security standard in design phase, we also perform to design and elaborate security attributes for node and module as identified security subjects in their defined tables. And then we describe the composition standard for security attribute design with some examples, after classifying it into security subject, access subject, access control area, identification or verification area, and encryption.