• International Journal of Concrete Structures and Materials
• /
• v.2 no.2
• /
• pp.145-152
• /
• 2008

So far, there has been no study of the concrete to strengthen in the lining of the tunnels, except for the study of the stability of subgrade and the tunnel construction technologies. In the existing concrete work for tunnel lining, lots of problems happen due to the partial compaction and the material segregation after casting concrete. Accordingly, the aim of this study is to improve economic efficiency and secure durability through the improvement of the construction performance and quality of the concrete for the tunnel lining among the civil structures. Therefore, the compactability and strength properties of the High Flowing Self-Compacting Lining Concrete (HSLC) are evaluated to develop the mixing proportion for design construction technology of HSLC that can overcome the inner cavity due to the reduced flowability and unfilled packing, which has been reported as the problem in the existing lining concrete. The result of the evaluation shows that the ternary mix meets the regulations better than the binary mix. Consequently, it has been judged applicable to the cement for tunnel lining.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.73-82
• /
• 2010

The GFRP(Glass-Fiber Reinforced Plastic) pipe is designed to behave safely against the external forces and to secure stability of deformation and settlements of pipe, since it is laid under the ground. In this study, the evaluation for the pressure stability was carried out by performing the laboratory experiments to figure out the mechanical properties of Glass-Fiber Reinforced Plastic pipe, take a theoretical approach, and suggest the mechanical properties necessary for the analysis and design of GFRP. Numerical analysis is also conducted to evaluate on the field application through the comparison concerning relations between deformation and differential settlement in the GFRP and hume pipes when all and half sections are under the surcharge load.

• Architectural research
• /
• v.4 no.1
• /
• pp.39-44
• /
• 2002

Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land from pollution and develop practical application of coal ash. This is an experimental study to compare and analyze the properties of concrete using high volume of coal ash (including fly ash and bottom ash) as a part of fine aggregate. For this purpose, the mix proportions of concrete according to replacement ratio of coal ash (10, 20, 35, 50%) were selected. And then air content, slump, setting time, bleeding content, chloride content, compressive strength and carbonation test were performed. According to test results, it was found that the bleeding content of concrete using the coal ash decreased according to increase of replacement ratio. And the chloride content of concrete using the bottom ash as a part of fine aggregate increased as the replacement ratio of bottom ash increased, but it is satisfied with the total chloride content of concrete recommended by KCI - $0.3kg/m^3$ below. Also, the compressive strength of concrete using the bottom ash was similar to that of plain concrete(BA 0) after 28days of curing and the carbonation depth of concrete increased as the replacement ratio increased. However, the carbonation depth of concrete using the fly ash decreased as the replacement ratio of fly ash increased.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.369-385
• /
• 2008

The purpose of site monitoring and investigation is to offer the basic data for performance assessment and design of low- and intermediate-level radioactive waste(LILW) disposal facility by monitoring variations of main site properties continually in the stage of pre-operation, operation and post-closure. Main contents of site monitoring are as follows. In the stage of pre-operation, suitability evaluation for disposal facility and monitoring for constructing and operating disposal facility are performed. In the operation period, monitoring is performed including surroundings to research the influence to environment with operating disposal facility and operate safely and efficiently. In the post-closure period, monitoring about major site properties is performed to prevent the effect of radioactive waste from disposal facility and to secure long-term safety.

• Herbal Formula Science
• /
• v.7 no.1
• /
• pp.183-188
• /
• 1999

Though development of diverse and highly value-added commodities in Artemisia Iwayomogi, we can expect such effects as procurement of secure farm's production bases and promotion of consumer's demands. Thus, as a first step for development of funtional foods of Artemisia Iwayomogi, solids yield, physical properties and scopoletin contents which is main component of Artemisia Iwayomogi, were investigated according to extration solvents and temperatures. The main result of this experiment were as following: solid yield in 50% ethanol extracts showed higher than those of water extracts at the same temperature. In condition of 50% ethanol extracts, solid yield, degree of browing and scopoletin contents showed increasing, but turbidities which mean transmittance(%T) showed decreasing sa temperature rise. In water extracts, pH values showed increasing as temperature rise.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.67-70
• /
• 2006

This study investigates the properties of light weight foamed concrete designed with various incorporating ratios of CKD and adding ratios of PS. Test showed that increase of CKD and PS decreased fluidity of fresh concrete, which need more addition of superplasticizer to secure proper fluidity. As for the sinking depth of specimens, using more CKD or PS decreased the value, due to the improvement of viscosity by micro particles of CKD and reduction of air loss by PS. Those methods are very effective to solve the sinking problem of light weight foamed concrete, which has been highly concerned. For the hardened concrete, compressive strength of specimens exhibited that using around 10% of CKD or 0.02% of PS increased the strength value, but decreased when incorporated or added more amounts of that, due to reduction of the sinking depth, caused by filling effect of the micro particle and improvement of the viscosity.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.133-136
• /
• 2007

This study investigates mechanical properties of the concrete using fine particle cement which is manufactured by the pulverizing process. The variable factors are 3 types of W/C such as 40, 50, and 60%, 3 types of curing temperature such as 5, 20, and $35^{\circ}C$, and 5types of the replacement of the fine particle cement such as 0, 25, 50, 75, and 100%. The unit water content, S/a and amount of the SP and AE agents to secure the slump and air content is gradually increased in accordance with amount of replacement. It can be confirmed that the delay of the setting time depending on FC content is decreased corresponding to FC content, so the effect of the acceleration to the setting time is expected. The compressive strength corresponding to FC content is proportionally increased, and the growth is confirmed about $30{\sim}40%$ at a day in 50% of FC contents. However, the increase of the strength is gradually decreased in accordance with increasing age.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.584-594
• /
• 2015

To date, many different kinds of logic styles for hardware countermeasures have been developed; for example, SABL, TDPL, and DyCML. Current mode-based logic styles are useful as they consume less power compared to voltage mode-based logic styles such as SABL and TDPL. Although we developed TPDyCML in 2012 and presented it at the WISA 2012 conference, we have further optimized it in this paper using a binary decision diagram algorithm and confirmed its properties through a practical implementation of the AES S-box. In this paper, we will explain the outcome of HSPICE simulations, which included correlation power attacks, on AES S-boxes configured using a compact NMOS tree constructed from either SABL, CMOS, TDPL, DyCML, or TPDyCML. In addition, to compare the performance of each logic style in greater detail, we will carry out a mutual information analysis (MIA). Our results confirm that our logic style has good properties as a hardware countermeasure and 15% less information leakage than those secure logic styles used in our MIA.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.39-43
• /
• 2005

There are big differences between developed countries and Korea regarding to the circumstances of electrical installation construction. In other words, Korea, in spite of its small market size, has large pools of electrical construction companies or associated workers, and there are a lot of poorly electrical construction companies in domestically. Thus, in reality, it is difficult to invest in technical development to enhance Korea's technical level on electrical installation and companies are likely to construct as occasion demands instead of constructing in a technical manner. Therefore, the government needs to develop a standard specification as a guideline for stable, economical and technical electrical installation construction. With this standard specification, almost all electrical construction companies could practically use it and also could guarantee their construction quality as well. It is important to induce small companies to utilize the standard specification to secure their construction excellent quality so that the life of the nation, individual's properties and national properties could be well protected.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.105-110
• /
• 2007

We investigated resin, thinner, painting, and injection for analyzing the chemical effect of polymer, and made the optimum solution with the best performance of ABS (acrylonitrile butadiene styrene) resin. The effect depended on chemical material especially its chemical and physical properties instead of mechanical transformation. When we looked over ABS resin, injection, chemical material and painting, we found out thinner was the main factor for painting problem. Throughout this test, we could solve the problem, secure the system for control process and drop many factors for changing quality.