• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.265-270
• /
• 2010

The national VTS was launched in 1993, and has adopted a harbour-oriented control method which is unable to consider enough characteristics of its work. However, for the past 17 years, the characteristics has changed due to increased amount of vessels. Up to now the domestic Vessel Traffic Service has adopted harbour-oriented control method which is unable to consider enough characteristics of its work. However, developed countries have carried out waters-oriented control method, according to the using areas of ships, to be well considered the characteristics of control for increasing efficiency of it. Especially, VTS of Daesan, Pyeongtaek and Inchon harbour can have confusions of control because of overlapped service areas of it. Therefore, in this paper suggested a new Sector Division that the relevants waters is divided into 3 operational Regions and these are divided into nine sectors again, for the purpose of improving the efficiency and the concentration of VTS.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2242-2244
• /
• 2000

시분할 다중화 방식을 이용한 정전 구동형 XY 스테이지의 새로운 위치 검출 방법을 제안한다. 각축의 고정자에 90도의 위상차를 가지는 여기(excitation) 신호를 주입하여 스테이지와 연결된 1개의 charge amplifier와 S/H를 이용하여 x축과 y축 방향의 위치를 검출한다. charge amplifier의 파라미터는 DC 이득이 크고 또한 신호간 간섭이 발생하지 않도록 설정한다. 제안된 방법은 XY 스테이지의 디지털 서보 제어기의 구성요소인 S/H를 사용하기 때문에 기존의 방식과는 달리 위치 신호의 검출이 안정적이고 반송 신호에 의한 고조파 왜곡과 복조 과정에서 발생되는 지연을 현저히 줄일 수 있으며 간단하게 구현할 수 있다.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.208-211
• /
• 2008

Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.507-516
• /
• 2010

Stationary combustion sources such as coal-fired power plants, waste incinerators, industrial manufacturing, etc. are recognized as major sources of mercury emissions. Due to rapid economic growth, zinc production in Korea has increased significantly during the last 30 years. Total zinc production in Korea exceeded 739,000 tons in 2008, and Korea is currently the third largest zinc producing country in the world. Previous studies have revealed that zinc smelting has become one of the largest single sectors of total mercury emissions in the World. However, studies on this sector are very limited, and a large gap in the knowledge regarding emissions from this sector needs to be bridged. In this paper, Hg emission measurements were performed to develop emission factors from zinc smelting process. Stack sampling and analysis were carried out utilizing the Ontario Hydro method and US EPA method 101A. Preliminary data showed that $Hg^0$ concentrations in the flue gas ranged from 4.56 to $9.90\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$, Hg(p) concentrations ranged from 0.03 to $0.09\;{\mu}g/m^3$ with an average of $0.04\;{\mu}g/m^3$, and RGM concentrations ranged from 0.23 to $1.17\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$. To date, emission factors of 7.5~8.0 g/ton for Europe, North America and Australia, and of 20 or 25 g/ton for Africa, Asia and South America are widely accepted by researchers. In this study, Hg emission factors were estimated using the data measured at the commercial facilities as emissions per ton of zinc product. Emission factors for mercury from zinc smelting pross ranged from 4.32 to 12.96 mg/ton with an average of 8.31 mg/ton. The emission factors that we obtained in this study are relatively low, considering Hg contents in the zinc ores and control technology in use. However, as these values are estimated by limited data of single measurement of each, the emission factor and total emission amount must be updated in future.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.1
• /
• pp.1-16
• /
• 2000

From 1998, Oriental Medical Physicians(OMP) is distributed in Public Health Sector. but long term plan for Oriental Medicine in Public Health is not existed. So, this study is designed for the activation of OMP Subjects in this study were comprised 3 groups of oriental medicine related persons, the group of which are Students of 11 Oriental Medical Schools, Oriental Medical Physicians in Public Health Sector, Specialist Croup of Oriental medicine Policy(total 1,458 persons). Data were collected from July 1st to November 30, 1999. Direct interview with key persons, systematic interview by using of interview protocol, e-mail and facsimile have been conducted. The results of survey were coded by Excel 5.0, and analysed with SAS 6.12 statistical package. Inter-group difference determined by T-test, and descriptive statistics have been examined. Major findings can be epitomized as follows. 1) OMP disposition to multifarious organizations and institutes such as Public Health Centers, Public Health Sub-centers, Public Hospitals, Private Hospitals in Remote-Vulnerable Area, Community Social Welfare Centers, Institutes for Heath Policy Research, etc, will promise an effective use of Oriental Medical Physician. 2) Average number of patients treated by OMP was 22.8, average budget for oriental medical department, in which OMP were affiliated, was 39.6 million Won per year. Direct cost per every patient visit was 7,210.9 Won, which is considered expensive for public health service. Therefore, development and transformation for Oriental Medical Service in Public Health Sector is desirable in economic and political aspects. 3) It is recommended that ${\ulcorner}Advisory\;Committee{\lrcorner},{\ulcorner}Planning\;Commission\;for\; Public\;Health\;in\;Oriental\;Medicine{\lrcorner}$ should be established for the activation and for the support of Oriental Medical Physician in Public Health Sector, 4) Most effective programmes for oriental public health doctor are health service programmes for the elderly, Home health visit, chronic degenerative disease control services(p<0.001). 5) Standard guideline for facilities and equipments of Oriental Medicine Department in Public Health Center is needed for optimal supply of resources and activation of public health activity.

• IE interfaces
• /
• v.22 no.4
• /
• pp.336-346
• /
• 2009

One of primary assumptions on DEA is that all DMUs for evaluation should be homogeneous. In comparative analysis among DMUs with relative efficiency measurement, it should be evaluated under identical conditions by ruling out external environmental influences. In this study, a measurement of innovation efficiency using the three-stage approach is performed. The approach employs DEA to measure relative efficiency and Tobit regressions to control external variables affecting innovation activity. The approach applied to firms in Korean Innovation Survey: Service Sector 2003 and 2006. Final efficiency scores of the approach represent net efficiency of the innovation. This study found that there is a increasing on technical efficiency of third stage, and it has difference with first stage significantly. Besides, a decrease on standard deviation of third stage is found. It means DMUs biased lower due to unfavorable condition and ones biased higher due to favorable condition are fallen into an identical operating environment through the approach. A measurement of net efficiency, excluding external effects, ensures the homogeneity of DMUs so that improves the reliability in terms of its analysis results. This study is expected to provide a direction and to be a valuable reference to further evaluation of innovation performance in Korean service sector.

• Clean Technology
• /
• v.2 no.2
• /
• pp.30-41
• /
• 1996

Air pollution problems are serious and present significant challenges to the engineering research community. EPA's engineering research programs have shifted from a primary focus on $SO_2$ and NOx pollution control to more complex and more difficult problems such as indoor air quality, air toxics, and global climate change. EPA research engineers are working closely with other research organizations in both the private sector and other federal research organizations to identify, evaluate, and develop cost-effective engineering solutions. The APPCE works closely with the EPA regulatory and regional offices to ensure that the best engineering information is utilized to formulate and implement the Agency's environmental protection program.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.3
• /
• pp.376-382
• /
• 2010

These days, a study on 'Unmanned Surface Vehicle (USV)' has made very active progress in many countries. Even if it is being expected that there will be a great demand of USV for wide field, such as military operation, private sector, and etc., the study of USV in Korea is still at an early stage. For this reason, we have made a very small USV which is composed of dual mode (autonomous and remote control). The TCP/IP communication is applied to the USV.

• Smart Structures and Systems
• /
• v.30 no.1
• /
• pp.1-15
• /
• 2022

This article focuses on stability analysis and fuzzy controller synthesis for large neural network (NN) systems consisting of several interconnected subsystems represented by the NN model. Advanced and fuzzy NN differential inclusion (NNDI) for stability based on the developed algorithm with H infinity can be designed based on the evolved biological design. This representation is constructed using sector linearity for NN models. Sector linearity transforms a non-linear model into a linear model based on proposed operations. New sufficient conditions are realized in the form of LMI (linear matrix inequalities) to ensure the asymptotic stability of the trans-Lyapunov function. This transforms the nonlinear model into a linear model based on multiple rules. At last, a numerical case study with simulations is derived as illustration to prove its feasibility in real nonlinear structures.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.367-377
• /
• 2015

This study analyzed the effectiveness of China's policy to reduce of sulfur dioxide. China's $12^{th}$ Five-year plan on national economic and social development emphasized environmental protection and low-carbon economic development. Sulfur dioxide was one of the major gases to affect air pollution and climate change and its control became a key policy agenda in the environment and energy sector. As the absolute amount of sulfur dioxide emissions in China came from the industrial sector, the control of the coal-based energy was especially urgent. This study analyzed the factors that influenced the sulfur dioxide emissions and the policy effects to reduce sulfur dioxide in China from 2003 to 2012 based on regional data. The air pollution treatment investments showed the biggest impact together with energy conservation policy in reducing sulfur dioxide emissions. However, pollutant emissions charge did not show a relevant policy effectiveness in all regions as the amount of charge would be smaller than economic benefit from non-compliance. Rationalizing pollutant emissions charge is, therefore, a key policy task for further reduction of sulfur dioxide emissions.