• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.645-653
• /
• 2013

Seoul National University flap(SNUF) blade is a small-scale rotor blade incorporating a small trailing-edge flap control surface driven by piezoelectric actuators at higher harmonics for vibration attenuation. Initially, the blade was designed using two-dimensional cross-section analysis and geometrically exact one-dimensional beam analysis, and its material configuration was finalized. A flap-deflection angle of ${\pm}4^{\circ}$ was established as the criterion for enhanced vibration reduction based on an earlier simulation. The flap-linkage mechanism was designed and static bench tests were conducted for verifying the performance of the flap-actuation mechanism. Different versions of test beds were developed and tested with the designed flap and the selected APA 200M piezoelectric actuators. Through significant improvements, a maximum deflection of ${\pm}3.7^{\circ}$ was achieved. High-frequency experiments were conducted for evaluating the performance, and the transfer function of the test bed was determined experimentally. With the static tests almost complete, the rotor power required for testing the blade in a whirl tower (centrifugal environment) was calculated, and further preparations are underway.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.77-89
• /
• 2008

The bikes are conflicted with the cars and the pedestrian at the intersection and the road with the bike crossing. To establish the bike signal at this section is one method to solve this conflict. According to the survey for the bike road status and the biker's characters which are crossing the road at the intersection, the bike crossing are established with beside the pedestrian crossing and most of the bikers are crossing the street by the pedestrian signal. Also, the bike queue which is waiting the signal change at the stop line was cleared before the closing the pedestrian signal. Considering the result of this survey, TOUCAN crossing signal type in England for bike signal at the place where the bike crossing are established with beside the pedestrian crossing, in which bike rider and pedestrian can cross by the pedestrian signal operation, is suggested. However, at the place where the bike crossing is apart from the pedestrian crossing, the bike signal which is connected to the vehicle signal is suggested. All these types of bike signals can be accepted for the present bike crossing equipments and the biker's characters and be adapted to the police standard traffic signal controller by adjusting the signal time only without any function change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.724-729
• /
• 2008

In the case of 'MAEMI', the Typhoon which formed in September, 2003, the largest-scale damage of tidal wave was caused by the co-occurrence of Typhoon surge and full tide. Until now Korea has been focusing on the calculating the amount of damage and its restoration to cope with these sea and harbor disasters. It is essential to establish some systematic counterplans to diminish such damages of large-scale tidal invasion on coastal lowlands considering the recent weather conditions of growing scale of typhoons. Therefore, the purpose of this research is to make the counterplans for prevention against disasters fulfilled effectively based on the data conducted by comparing and analyzing the accuracy between observation values and the results of estimating the greatest overflow area according to abnormal tidal levels centered on Masan area where there was the severest damage from tidal wave at that time. It's necessary utilize data like high-resolution satellite image and LiDAR(etc.) for correct analysis data considering geographical characteristics of dangerous area from the storm surge. And we must make a solution to minimize the damage by making data of dangerous section of flood into GIS Database using those data (as stated above) and drawing correcter damage function.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.258-258
• /
• 2019

계산 격자에 기반하여 천수 흐름을 모의할 때, 그 격자에 담긴 물의 양을 정확하게 파악할 필요가 있다. 예를 들어, 초기조건으로 수위가 부여된다면 계산격자의 기하 특성에 맞추어 흐름 변수인 수심이나 흐름 단면적으로 바꾸어야하기 때문이다. 필요에 따라서는 모의 결과를 수위로 보이거나 격자 속 수심을 계산에 사용할 수도 있으므로 그 역변환도 고려되어야 한다. 2차원의 삼각형 계산격자에 대해서는 물의 부피와 수위 관계(volume/free-surface relationship)가 이미 정확(exact)하게 구명되어 있다(Hwang, 2017, J. KWRA). 그런데 1차원 문제의 횡단면에서 흐름 단면적과 수위의 관계(area/free-surface relationship)는 수위로부터 면적 환산에 대해서는 정확하나 그 역변환은 그렇지 않다. 매 시간 단계에서 갱신된 흐름 단면적으로부터 수위를 환산하기 위해 미리 작성된 면적-수위 자료를 이용한 선형 보간이 적용된다(Goodell, 2011, The RAS Solution). 이때, 환산 정확도는 자료의 해상도에 의존된다. 다행히 하천 횡단면 대부분을 채워 흐르는 홍수모의에서는 이 문제가 그리 심각하지는 않다. 심지어 수위가 복단면 저수로 턱에 걸쳐있어 흐름단면적이 급변하는 경우에도 환산 수위의 정확도는 크게 훼손되지 않는다. 그러나 미미한 환산 오차일지라도 그로 인해 수위가 저수로 턱을 넘거나 그보다 작을 수 있다. 이 경우, 홍수터의 잠김여부에 따라 수면폭(top width)이 실제 계산 결과에 비해 크게 달라질 수밖에 없다. 수면폭 오차는 그것을 이용하여 결정되는 수리 수심(hydraulic depth)이나 평균 하상고(mean bed level)의 산정에도 전파된다. 이 연구에서는 하천 횡단면에서 수위와 흐름 단면적 사이의 환산 정확도를 크게 높일 수 있는 기법을 제시하였다. 먼저 하천 횡단면에서 주어진 수위에 대해 흐름 단면적을 산정할 수 있는 알고리듬을 보였다. 또한, 횡단면에서 수위와 흐름 단면적의 관계가 단조 증가 함수(monotonically increasing function)임에 착안하여 그 역변환에 대해 해 찾기(root finding) 방법의 하나인 Brent 기법을 적용하였다. 이 기법은 주어진 구간에서 도함수가 알려져 있지 않은 경우에 대해서도 효과적으로 해를 찾을 수 있는 것으로 알려져 있다(Press et al., 2002, Numerical Recipes in C, 2nd Ed.). 내성천 하류 수계의 333개 단면에서 수면폭에 대한 상대 오차를 살펴보면, 선형 보간에 의한 기존 방법으로는 면적-수위 자료의 수가 1,000개가 되어도 그 최대치가 1% 이내에 들지 않은 반면, 이 연구에서 제시한 기법으로 면적-수위 자료 없이도 1% 이내로 줄어드는 것을 확인하였다. 다만, 반복 계산에 의한 계산 시간의 증대를 피할 수 없다. 미리 작성된 면적-수위 자료를 이용하면 계산 비용을 줄일 수 있으며, 약 35개의 구간으로 나누었을 때 비용 대비오차가 적절하였다. 이 연구는 한국건설기술연구원(주요사업 과제번호: 20190116-001)의 지원에 의한 것이다.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.220-227
• /
• 2016

Marine seismic data have not only primary signals from subsurface but also ghost signals reflected from the sea surface. The ghost decreases temporal resolution of seismic data because it attenuates specific frequency components. For eliminating the ghost signals effectively, the exact ghost delaytimes and reflection coefficients are required. Because of undulation of the sea surface and vertical movements of airguns and streamers, the ghost delaytime varies spatially and randomly while acquiring seismic data. The reflection coefficient is a function of frequency, incidence angle of plane-wave and the sea state. In order to estimate the proper ghost delaytimes considering these characteristics, we compared the ghost delaytimes estimated with L-1 norm, L-2 norm and kurtosis of the deghosted trace and its autocorrelation on synthetic data. L-1 norm of autocorrelation showed a minimal error and the reflection coefficient was calculated using Kirchhoff approximation equation which can handle the effect of wave height. We applied the estimated ghost delaytimes and the calculated reflection coefficients to remove the source and receiver ghost effects. By removing ghost signals, we reconstructed the frequency components attenuated near the notch frequency and produced the migrated stack section with enhanced temporal resolution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.35-41
• /
• 2005

We investigated the effects of skin hydration and anti-irritation of exopolysaceharide (GF-glucan) produced from submerged culture of Grifola frondosa. The moisturizing effects and trans-epidermal water loss (TEWL) of GF-glucan in cosmetic products (O/W emulsion) were clinically studied. GF-glucan showed good skin hydration effects when compared with sodium hyaluronate which is a commonly using moisturizer. The skin protective effects of GF-glucan against sodium lauryl sulfate (SLS) were also found. Twice a day application of the CF-glucan to skin reduced local inflammation remarkably. Irritant reactions were assessed by various aspects of skin function, erythema (skin color reflectance), hydration (electrical capacitance) and TEWL. In the human skin test, 5-day treatment of the GF-glucan was found to reduce SLS-induced skin erythema and Improve bier regeneration. Taken all together, GF-glucan should be a very useful cosmetic ingredient, as a moisturizer, and a protecting agent for various skin irritations.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2019

The purpose of this study is to compare and analyse the differences between a customized small finger made by 3D printing technology, a real small finger, and the other made from plaster of an orthotic company. The areas and the volumes of each cross-section were measured by Computer tomography(CT) and a 3D scanner and analysis of variance was performed to find out the differences of each shape. The areas of the point of 15.69mm, Distal Interphalangel Joints, were measured 30 times respectively using the caliper toll function of Picture Archiving Communication System(PASC) program. The volumes were measured by Configure Units of Meshmixer Program. There was no significant difference in the areas between three of them and there was 0.2 mm gap in the volume, which was more than the significance probability. Therefore, the result of this study shows the availability of finger orthoses made by 3D printing technology in the medical field.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.1-12
• /
• 2018

This study was conducted to analyze the openness of erosion control dams situated near mountain stream. The ecological functions of erosion control dams analyzed by such openness for adequately protect and manage the diversity of species and to prevent disasters. The obtained results were as follows. When structurally modifying or changing non-permeable, gravity type dams with a passing rate of less than 1% into open-type dams, the passing rate increased by about 77 times more from 0.72% to 55.8%. Except for closed, gravity type erosion control dams that are constructed with a special purpose such as creating sand deposits and reservoirs, there is a need to construct and improve the dams into permeable type dams that can relatively satisfactorily perform various functions such as carrying soil and sand to the downstream region and create a ecological corridor upstream and downstream for fish and amphibians. The openness based on the blocking height of the erosion control dam varies depending upon the height of the base part and the depth of the substructural part. It must be designed based on the on-site conditions and the purpose of the construction. The functional types of erosion control dams based on the open form of the cross-section as follows: the fish traffic type, flood control type, reservoir type for forest fire control), non-permeability type for soil and rock blocking, net type for blocking the rock flow and the particle screen type.

• Journal of Korean Society of Archives and Records Management
• /
• v.19 no.3
• /
• pp.223-245
• /
• 2019

As the foundation for the Fourth Industrial Revolution, blockchain is becoming an essential core infrastructure and technology that creates new growth engines in various industries and is rapidly spreading to the environment of businesses and institutions worldwide. In this study, the characteristics and trends of blockchain technology were investigated and arranged, its application to the records management section of public institutions was required, and the procedures and methods of construction in the records management field of public institutions were studied in literature. Finally, blockchain technology was applied to the records management to propose an archive chain model and describe possible expectations. When the transactions that record the records management process of electronic documents are loaded into the blockchain, all the step information can be checked at once in the activity of processing the records management standard tasks that were fragmentarily nonlinked. If a blockchain function is installed in the electronic records management system, the person who produces the document by acquiring and registering the document enters the metadata and information, as well as stores and classifies all contents. This would simplify the process of reporting the production status and provide real-time information through the original text information disclosure service. Archivechain is a model that applies a cloud infrastructure as a backend as a service (BaaS) by applying a hyperledger platform based on the assumption that an electronic document production system and a records management system are integrated. Creating a smart, electronic system of the records management is the solution to bringing scattered information together by placing all life cycles of public records management in a blockchain.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1339-1348
• /
• 2020

Phytoplankton controls marine ecosystems in terms of nutrients, photosynthetic rate, carbon cycle, etc. and the degree of its influence on the marine environment depends on their physical size. Many studies have been attempted to identify marine phytoplankton size classes using the remote sensing techniques. One of successful approach was the three-component model which estimates the chlorophyll concentrations of three phytoplankton size classes (micro-phytoplankton; >20 ㎛, nano-; 2-20 ㎛ and pico-; <2 ㎛) as a function of total chlorophyll. Here, we examined the applicability of Geostationary Ocean Colour Imager (GOCI) to the mapping of the phytoplankton size class distribution in the East Sea. A fit of the three-component model to a biomarker pigment dataset collected in the study area for some years including a large harmful algal bloom period has been carried out to derive size-fractioned chlorophyll concentration (CHL). The tuned three-component model was applied to the hourly GOCI images to identify the fractions of each phytoplankton size class for the entire CHL. Then, we investigated the distribution of phytoplankton community in terms of the size structure in the East Sea during the harmful Cochlodinium polykrikoides blooms in the summer of 2013.