• The Korean Journal of Mycology
• /
• v.22 no.1
• /
• pp.50-61
• /
• 1994

From soil samples, 380 antagonistic microorgnisms were isolated. Among the isolates, 42 strains had mycelia growing inhibition ability against Fusariun solani, ginseng root rot causing pathogen. Isolates CHA 1 and S-PFHR 6 were proposed as antagonists for this study and they were identified as Promicromonospora sp. and Pseudomonas pseudoalcaligenes respectively. As an antagonism against hyphae of F. solani in dual culture test, CHA 1 and S-PFHR 6 inhibited linear growing, caused abnormal branching, and the membrane projection which formed by cell wall destruction. The secondary metabolites contained in the culture filtrates which prepared from PD broth and Nutrient broth inhibited the spore germination to 14.3%. The culture filtrate of S-PFHR 6 which prepared by a little amount of soil extract addition to nutrient rich medium had more strongly. inhibited the spore germination and spore germination decreased to less than 4.0% in it. The soil used in this study had fungistasis and the germination rate of macroconidia and chlamydospore of F.solani was 19.4% and 17.7% respectively. The steam sterilized soil lost fungistasis and germination rate of conidia increased to more than 97.9%. The soils amended with the propagule of CHA 1 and S-PFHR 6 increased fungistasis and the germination rate of macroconidia decreased to 14.7% and 11.7% respectively in each treatments. But the soil ammended with glucose and asparagine annulled fungistatic ability and the germination rate of macroconidia increased to more than 48.0%. As an antagonistic activity of the secondary metabolites of two antagonistic isolates in soil, the germination rate of macroconidia of F. solani was 9.3% in the soil amended with the culture filtrate of CHA 1 but the culture filtrate of S-PFHR 6 had no such activity. In the soil which treated with antagonist propagule or culture filtrate, the chlamydospore germination rate was lower than that in natural soil. The addition of glucose and asparagine to antagonist propagule treated soil did not enhanced the chlamydospore germination.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.3-18
• /
• 1985

In Korea, a study on the anatomical features of pitch pine (pinus rigida Miller) branch wood through photo-microscopical method was reported in 1972 by Lee. Therefore, as a further study of Lee's on the anatomical features in branch wood of pinus rigida miller that grows in Korea, compression wood, opposite wood, and side wood were selected and treated for the purpose of comparing their structures revealed on cross and radial surface through scanning electron microscope in this study. The obtained results in this study were summarized as follows; 1. The trachied transition from earlywood to late wood is very gradual and the tracheids are nearly regular in both arrangement and size in compression wood but this transition in opposite wood and side wood is abrupt and the tracheids in opposite wood and side wood are less regular than those in compression wood. Also, the annual ring width of opposite wood is narrower than that of compression wood or side wood and the rays revealed on cross surface of side wood are more distinct than compression wood and opposite wood rays. 2. The tracheids of compression wood show roundish trends especially in earlywood but those of opposite wood and side wood show some angular trends. And intercellular space, helical cavity, and spiral check are present in both earlywood and latewood of compression wood but not present in opposite wood and side wood irrespective of earlywood and latewood. 3. The wall thickness of latewood tracheid is similar to that of earlywood tracheid in compression wood whereas the wall thickness of latewood tracheid is by far thicker than that of earlywood tracheid in opposite wood and side wood and the S3 layer of secondary wall is lack in compression wood tracheid unlike opposite wood and side wood tracheid. 4. The tracheids in compression wood are often distorted at their tips unlike those in opposite wood and side wood and the bordered pit in compression wood tracheid is located at the bottom of helical groove unlike that in opposite wood and side wood tracheid. 5. The bordered pits in radial wall of opposite wood and side wood tracheids are oval in shape but those of compression wood tracheids show some modified oval shape. 6. In earlywood of side wood, the small apertures of cross-field pits are roundish triangle to rectangle and the large one are fenestriform through the coalition of two small ones. However, the small apertures of cross-field pits are upright oval and the large ones are procumbent oval shape in earlywood of opposite wood and the apertures of cross-field pits in compression wood are tilted bifacial convex lens shape in earlywood and slit in late wood because of the border on tracheid side.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.4
• /
• pp.4-14
• /
• 1974

The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.592-602
• /
• 2014

In the Integrated Gasification Combined Cycle (IGCC), the stability of the gasifier has strong influences on the rest of the plant as it supplies the feed to the rest of the power generation system. In order to ensure a safe and stable operation of the entrained-flow gasifier and for protection of the gasifier wall from the high internal temperature, the solid slag layer thickness should be regulated tightly but its control is hampered by the lack of on-line measurement for it. In this study, a previously published dynamic simulation model of a Shell-type gasifier is reproduced and two different linear model predictive control strategies are simulated and compared for multivariable control of the entrained-flow gasifier. The first approach is to control a measured secondary variable as a surrogate to the unmeasured slag thickness. The control results of this approach depended strongly on the unmeasured disturbance type. In other words, the slag thickness could not be controlled tightly for a certain type of unmeasured disturbance. The second approach is to estimate the unmeasured slag thickness through the Kalman filter and to use the estimate to predict and control the slag thickness directly. Using the second approach, the slag thickness could be controlled well regardless of the type of unmeasured disturbances.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.12
• /
• pp.2119-2128
• /
• 2017

Citrinin (CIT) is a toxic secondary metabolite produced by fungi belonging to the Penicillium, Aspergillus, and Monascus spp. This toxin has been detected in many agricultural products. In this study, a strain Y3 with the ability to eliminate CIT was screened and identified as Cryptococcus podzolicus, based on the sequence analysis of the internal transcribed spacer region. Neither uptake of CIT by cells nor adsorption by cell wall was involved in CIT elimination by Cryptococcus podzolicus Y3. The extracellular metabolites of Cryptococcus podzolicus Y3 stimulated by CIT or not showed no degradation for CIT. It indicated that CIT elimination was attributed to the degradation of intracellular enzyme(s). The degradation of CIT by C. podzolicus Y3 was dependent on the type of media, yeast concentration, temperature, pH, and initial concentration of CIT. Most of the CIT was degraded by C. podzolicus Y3 in NYDB medium at 42 h but not in PDB medium. The degradation rate of CIT was the highest (94%) when the concentration of C. podzolicus Y3 was $1{\times}10^8cells/ml$. The quantity of CIT degradation was highest at $28^{\circ}C$, and there was no degradation observed at 3$5^{\circ}C$. The study also showed that acidic condition (pH 4.0) was the most favorable for CIT degradation by C. podzolicus Y3. The degradation rate of CIT increased to 98% as the concentration of CIT was increased to $20{\mu}g/ml$. The toxicity of CIT degradation product(s) toward HEK293 was much lower than that of CIT.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.767-772
• /
• 2006

In this study, we sought to produce a double layer microcapsule containing Lactobacillus sp. as the core material. The conditions for this microencapsulation process were optimized for the formation of a microcapsule with high storage stability. The effects of the ratio of[core material] to [wall material], the type and concentration of emulsifier used, the stirring rate(dispersibility) and the temperature of the dispersion fluid on the microencapsulation yield were studied. The optimal concentration and type of emulsifier required in order to allow for the stable formation of a W/O type emulsion (a primary process in double layer microencapsulation) were 1.00% (w/w) and polyglycerol polyricinileate (PGPR, HLB 0.6). However, the optimal concentration and type of emulsifier required to construct a W/O/W type emulsion (a secondary process in double layer microencapsulation), were 0.65% (w/w) and polyoxyethylene sorbitan monolaurate (PSML, HLB 16.7). Finally, we obtained a maximum yield of microencapsulation with a dispersion fluid stirring rate of 270rpm and a dispersion fluid temperature of 10$^{\circ}C$ after spraying a W/O/W type emulsion into the dispersion fluid.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.103-110
• /
• 1999

A thromboembolic event in patients later given a diagnosis of cancer is the result rather than the cause of the cancer. The risk of hidden cancer is significantly higher for patients with recurrent idiopathic thromboembolism compared to those with secondary deep vein thrombosis. Microemboli from hepatic or adrenal metastases and large-sized emboli from the great veins invaded by the tumor are the sources of tumor embolization The intraarterial tumor emboli less likely invade the arterial wall. Thrombus formation and organization may be capable of destroying tumor cells within pulmorlary blood vessels. Therefore, all tumor emboli are not true metastases. The treatment of deep vein thrombosis and pulmonary embolism in patients with cancer consists of anticoagulation with heparin and warfarin, venacaval filters, appropriate anti-neoplastic agents, and surgical methods(embolectomy, thromboendarterectomy). However, considerable literatures suggest that oral anticoagulant such as warfarin is ineffective in the treatment of those. We report a case of primary unknown squamous cell carcinoma incidentally found in the thrombus after pulmonary embolectomy.

• Journal of Trauma and Injury
• /
• v.24 no.1
• /
• pp.12-17
• /
• 2011

Purpose: A rib fracture secondary to blunt thoracic trauma continues to be an important injury with significant complications. Unfortunately, there are no definite treatment guidelines for severe multiple rib fractures. The purpose of this study was to evaluate the result of early operative stabilization and to find the risk factors of surgical fixation in patients with bilateral multiple rib fractures or flail segments. Methods: From December 2005 to December 2008, the medical records of all patients who underwent operative stabilization of ribs for severe multiple rib fractures were reviewed. We investigated patients' demographics, preoperative comorbidities, underlying lung disease, chest trauma, other associated injuries, number of surgical rib fixation, combined operations, perioperative ventilator support, and postoperative complications to find the factors affecting the mortality after surgical treatment. Results: The mean age of the 96 patients who underwent surgical stabilization for bilateral multiple rib fractures or flail segments was 56.7 years (range: 22 to 82 years), and the male-to-female ratio was 3.6:1. Among the 96 patients, 16 patients (16.7%) underwent reoperation under general or epidural anesthesia due to remaining fracture with severe displacement. The surgical mortality of severe multiple rib fractures was 8.3% (8/96), 7 of those 8 patients (87.5%) dying from acute respiratory distress syndrome or sepsis. And the other one patient expired from acute myocardial infarction. The risk factors affecting mortality were liver cirrhosis, chronic obstructive pulmonary disease, concomitant severe head or abdominal injuries, perioperative ventilator care, postoperative bleeding or pneumonia, and tracheostomy. However, age, number of fractured ribs, lung parenchymal injury, pulmonary contusion and combined operations were not significantly related to mortality. Conclusion: In the present study, surgical fixation of ribs could be carried out as a first-line therapeutic option for bilateral rib fractures or flail segments without significant complications if the risk factors associated with mortality were carefully considered. Furthermore, with a view of restoring pulmonary function, as well as chest wall configuration, early operative stabilization of the ribs is more helpful than conventional treatment for patients with severe multiple rib fractures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.631-638
• /
• 2016

Radiation proctitis is a common complication after radiotherapy for pelvic malignant tumors. This study was conducted to assess the efficacy of novel almagate enemas in hemorrhagic chronic radiation proctitis (CRP) and evaluate risk factors related to rectal deep ulcer or fistula secondary to CRP. All patients underwent a colonoscopy to confirm the diagnosis of CRP and symptoms were graded. Typical endoscopic and pathological images, risk factors, and quality of life were also recorded. A total of 59 patients were enrolled. Gynecological cancers composed 93.1% of the primary malignancies. Complete or obvious reduction of bleeding was observed in 90% (53/59) patients after almagate enema. The mean score of bleeding improved from 2.17 to 0.83 (P<0.001) after the enemas. The mean response time was 12 days. No adverse effects were found. Moreover, long-term successful rate in controlling bleeding was 69% and the quality of life was dramatically improved (P=0.001). The efficacy was equivalent to rectal sucralfate, but the almagate with its antacid properties acted more rapidly than sucralfate. Furthermore, we firstly found that moderate to severe anemia was the risk factor of CRP patients who developed rectal deep ulcer or fistulas (P= 0.015). We also found abnormal hyaline-like thick wall vessels, which revealed endarteritis obliterans and the fibrosis underlying this disease. These findings indicate that almagate enema is a novel effective, rapid and well-tolerated method for hemorrhagic CRP. Moderate to severe anemia is a risk factor for deep ulceration or fistula.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.120-125
• /
• 2015

With rapid urbanization, the volume of traffic in urban area has been significantly increased. This in turn led to problem which can be described as Road Traffic Noise. Currently, to alleviate the road traffic noise damage, a demand for installation of soundproofing walls is rising. Among different shapes of soundproof walls being installed, the reflection-type acoustical insulation panel is highly drawing attentions of residents due to the fact that it does not obstruct their field of vision in contrast with the opaque acoustical insulation panel. On the other hand, improving the soundproofing wall of the reflection-type acoustical insulation barrier panel needs to be focused on since it has a possibility to cause a secondary damage by reflected sounds. Therefore, in this research, study has been carried out to improve the forms in order to minimize travelling of reflected sounds through changing the frontal surface shape and geometrical shape of the reflection-type soundproofing panel. A result from comparison between the normal reflection-type soundproofing panel and the improved soundproofing panel, with reduction effects in the noise reflection, showed that the curved type of soundproofing panel has an impact on reducing the noise up to 1.5 dB. Furthermore, from the research conducted, it appears that the increase and decrease in the reflected sounds can be changeable depending on various design factors. Thus, it turns out that the study shows a potential possibility to develop a reduction technology of the reflected sounds pertaining to overall condition on the soundproofing walls.