• 제목/요약/키워드: Secondary stress

검색결과 774건 처리시간 0.025초

An in vivo Study of Lipid Peroxidation in Rats under Conditions of Oxidative Stress and the Antioxidant Effects of Probucol

  • Kim, Songsuk
    • Nutritional Sciences
    • /
    • 제6권2호
    • /
    • pp.94-99
    • /
    • 2003
  • The purpose of this study was to investigate in vivo lipid peroxidation in rats under conditions of streptozotocin-induced oxidative stress and the antioxidant effects of probucol. In vivo lipid peroxidation was observed by measuring low molecular weight aldehydes and related carbonyl compounds in rat urine. Three groups of male Wistar rats weighing 165-190 g were used: normal (N), streptozotocin-induced oxidative stress (OS) and oxidative stress plus probucol treatment (P). following streptozotocin treatment of the rats, a variety of secondary lipid peroxidation products were increased. The levels of butanal, hexanal, hex-2-enal, kept-2-enal, octanal, non-2-enal, deca-2,4-dienal, 4-hydroxyhex-2-enal, 4-hydroxyno n-2-enal, malondi aldehyde(MDA), and unknown carbonyl compounds were significantly increased in the oxidative stress group compared to the control group. Treatment with probucol resulted in significant decreases in buoal, hexanal, hex-2-enal, octanal, deca-2,4-dienal, 4-hydroxyhex-2-enal, MDA and unknown carbonyl compounds. Hept-2-enal, hepta-2,4-dienal and non-2-enal appeared to have a tendency to decrease due to pobucol treatment.

미혼여성의 스트레스, 우울에 따른 음주 정도의 차이 (Differences in Drinking Scores according to Stress and Depression in Unmarried Women)

  • 김효정;정재원
    • Perspectives in Nursing Science
    • /
    • 제13권1호
    • /
    • pp.10-16
    • /
    • 2016
  • Purpose: This study aimed to investigate differences in drinking scores according to stress and depression. Methods: A secondary analysis of the 5th and 6th Korea National Health and Nutrition Examination Surveys was conducted. Complex sampling design data analysis was performed in order to identify differences in Alcohol Use Disorder Identification Test (AUDIT) scores according to stress and depression among 1,732 unmarried women. Results: The average AUDIT score was 6.14 in unmarried women. There were significant differences in AUDIT scores in terms of stress and depression. Conclusion: Practical programs that can prevent alcohol drinking for unmarried women are suggested. Programs for alcohol-related problems should include stress and depression management.

관상동맥질환자의 주관적 건강이 우울에 미치는 영향: 스트레스 인지 매개효과 (The Influence of Subjective Health on Depression in Patients with Coronary Artery Disease: Mediating Effects of Perceived Stress)

  • 진혜경
    • 근관절건강학회지
    • /
    • 제28권1호
    • /
    • pp.61-69
    • /
    • 2021
  • Purpose: This study investigated the mediating effect of perceived stress in the relationship between subjective health and depression in patients with coronary artery disease. Methods: This secondary analysis study used data from the 2016-2018 Korea National Health and Nutrition Examination Survey (KNHANES). Study participants included 466 patients over 20 years of age with coronary artery disease. Measures included questions about general characteristics, subjective health, perceived stress, and depression. The data were analyzed using complex sample design, descriptive analysis, Rao-Scott ��2 statistic, and multivariate logistic regression analysis with the SPSS 24.0 program. Results: Subjective health influenced depression, and perceived stress partially mediated it. Conclusion: To prevent depression in patients with coronary artery disease, it is necessary to develop effective stress management strategies.

응력과 온도에 따른 ABS의 크리프특성에 관한 연구 (A Study of Creep Characteristics of ABS (Acrylonitrile Butadiene Styrene) for Different Stress Levels and Temperatures)

  • 강석춘
    • 한국정밀공학회지
    • /
    • 제29권10호
    • /
    • pp.1137-1143
    • /
    • 2012
  • Creep characteristic is an important failure mechanism when evaluating engineering materials that are soft material as polymers or used as mechanical elements at high temperatures. One of the popular thermo-plastic polymers, Acrylonitrile Butadiene Styrene (ABS) which is used broadly for machine elements material, as it has excellent mechanical properties such as impact resistance, toughness and stiffness compared to other polymers, was studied for creep characteristic at different levels of stress and temperatures. From the experimental results, the creep limit of ABS at room temperature is 80 % of tensile strength which is higher than PE and lower than PC or PMMA. Also the creep limits decreased to linearly as the temperatures increased, up to $80^{\circ}C$ which is the softening temperature of Butadiene ($82^{\circ}C$). Also the secondary stage of creep among the three creep stages for different levels of stress and temperature was non-existent which occurred for many metals by strain hardening effect.

Influence of Culture Conditions on Production of NGPs by Aspergillus tubingensis

  • Lilia, Lopez De Leon;Isaura, Caceres;Julie, Bornot;Elodie, Choque;Jose, Raynal;Patricia, Taillandier;Florence, Mathieu
    • Journal of Microbiology and Biotechnology
    • /
    • 제29권9호
    • /
    • pp.1412-1423
    • /
    • 2019
  • The filamentous fungus Aspergillus tubingensis that belongs to the black Aspergillus section has the capacity to produce high-value metabolites, for instance, naphtho-gamma-pyrones (NGPs). For these fungal secondary metabolites, numerous biological properties of industrial interest have been demonstrated, such as antimicrobial, antioxidant and anti-cancer capacities. It has been observed that production of these secondary metabolites is linked with fungal sporulation. The aim of this research was to apply osmotic and oxidative environmental stresses to trigger the production of NGPs in liquid cultures with CYB (Czapek Dox Broth). In addition, numerous parameters were tested during the experiments, such as pH value, incubation time, container geometry, and static and agitation conditions. Results demonstrate that the produced amount of NGPs can be enhanced by decreasing the water activity ($a_w$) or by adding an oxidative stress factor. In conclusion, this study can contribute to our knowledge regarding A. tubingensis to present an effective method to increase NGP production, which may support the development of current industrial processes.

선체판의 항복응력 변화에 따른 최종강도거동에 관한 연구 (Ultimate Strength varying the Yield Stress of a Ship's Plate)

  • 고재용;이준교;박주신
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2005년도 춘계학술발표회
    • /
    • pp.179-183
    • /
    • 2005
  • 최근 박판부재인 고장력강이 구조물에 폭넓게 사용됨으로서 좌굴이 발생하기 쉽다. 특히 고장력강을 사용하는 선체구조물에서는 좌굴은 중요한 설계기준이 되고 있다. 따라서 좌굴발생 후 거동을 정확하게 파악하는 것은 선체구조의 안정성에 중요하다. 본 연구에서는 선체의 대표적인 구조물인 판을 대상으로 각 선급 룰에서 좌굴강도식의 기준으로 삼고 있는 단순지지조건에서의 여러 가지 항복강도에 따라 압축하중을 받는 박판구조물의 초기좌굴 후 거동과 2차좌굴 후 거동에 대해서 규명하였다. 해석방법으로는 범용 유한요소해석 프로그램인 ANSYS를 이용하였고 2차좌굴과 같은 복잡한 비선형거동을 해석하기 위하여 호장증분법(Arc-length method)을 사용하였다.

  • PDF

일축압축 상태하 다중 불연속면의 파괴에 대한 연구 (Fracture of Multiple Flaws in Uniaxial Compression)

  • 사공명;안토니오보베
    • 터널과지하공간
    • /
    • 제11권4호
    • /
    • pp.301-310
    • /
    • 2001
  • 열 여섯개의 절리 면을 가진 석고 시편을 제작, 일축 압축 실험을 하여 관측된 결과를 절리 면이 두 개 및 세개 가진 시편의 실험 결과와 비교하였다. 그 결과 다중 절리면(열여섯 면)에서 관측된 익형(翼形)크랙, 이차 크랙, 연절리 (連節理) 유형은 절리가 두 개 및 세 개를 가진 시험체와 비슷한 형상을 보였다. 익형 크랙은 절리면과 일정한 각도를 유지한 상태에서 시작하여 안정적으로 진전, 최대 압축응력 방향으로 발달하였으며 이차 크랙 또한 안정적인 진전 양상을 보였으나 높은 하중 상태에서 이차 크랙은 불안정한 진전을 보이며 연절리 현상을 보였다. 이차 크랙의 종류로는 유사 공면(共面) 및 사면(斜面) 이차 크랙이 관측되었다. 연절리 현상은 익형 크랙과 이차 크랙에 의한 절리면의 연결로 나타나며 본 실험에서 네 종류의 연절리 현상이 관측되었다. 관측된 연절리의 발생 형태, 익형 크랙 및 이차 크랙의 초기 발생 응력은 절리면의 간격, 연속성, 경사각, 단선(短線)각도와 절리면의 배열과 관련이 있다.

  • PDF

간접유치장치 설계변화에 따른 하악유리단 국소의치의 광탄성 응력분석 (A PHOTOELASTIC STRESS ANALYSIS IN MANDIBULAR DISTAL - EXTENSION REMOVABLE PARTIAL DENTURES WITH VARIOUSLY DESIGNEO INDIRECT RETAINERS)

  • 강승종;계기성
    • 대한치과보철학회지
    • /
    • 제28권2호
    • /
    • pp.183-197
    • /
    • 1990
  • The purpose of this study was to analyse the magnitude and distribution of stresses using a Photoelastic model from and distal - extension removable partial dentures With four designed indirect retainers. The designs of the indirect retainers were as follows : Design No. 1 : Aker's clasp on 1st bicuspid with no indirect retainer. Design No. 2 : Aker's clasp on 1st bicuspid with indirect retainer on canine. Design No. 3 : Extension of the reciprocal arm of Aker's clasp toward incisal rest on canine. Design No. 4 : Connection with the indirect retainer as in No. 2 and extension of reciprocal arm of Aker' s clasp. A photoelastic model was made of the epoxy resin(PL - 1) and hardner(PLH - 1) and coated with plastic cement -1(PC -1) at the lingual surface of the epoxy model and set with chrome - cobalt partial dentures. A unilateral vertical load of 10kg to the right 1st molar and a vertical load of 10kg to the middle portion of the metal bar crossing both the 1st molars of the right and left, were applied. With the use of specially designed jig, fixture; loading device and the reflective circular polariscope, we obtained the following results : 1. When the unilateral vertical load and the vertical load of the middle portion of the metal bar were applied, design No. 2, 3 and 4 exhibited the higher stress concentration at the root apices and their surrounding tissues of the primary and secondary abutment teeth. 2. When the unilateral vertical load applied to design No. 2,3 and 4 the root apices of the primary and secondary abutment teeth and their surrounding tissues and the nonloaded side of edentulous area exhibited and even stress distribution. 3. When the vertical load was applied, the stress concentration fringe in the primary and secondary abutment teeth was in the order of No. 1,4,2 and 3. 4. No.1 and 4 exhibited the higher distrorted stress concentration at the primary teeth and the edentulous area in the nonloaded side. 5. No.2 design reduced the stresses at the apices of the alveoli of the primary abutment teeth bilaterally as well as on the crest of the residual ridge on the nonloaded side. 6. No. 2 design exhibited the most favorable stress distribution.

  • PDF

재난 자원봉사인력의 소진 양상에 따른 이차외상스트레스와 세상에 대한 신념의 차이 (Understanding Voluntary Disaster Workers with Their Burnout Pattern and the Group Differences in Secondary Traumatic Stress and World Assumptions)

  • 민지원;주혜선;안현의
    • 한국심리학회지 : 문화 및 사회문제
    • /
    • 제22권3호
    • /
    • pp.363-385
    • /
    • 2016
  • 본 연구는 재난지원인력으로서 자원봉사자의 역할과 그 중요성이 계속적으로 증가하는 상황에서 이들이 경험하는 심리적 어려움을 살펴보기 위해, 소진 양상에 따른 하위집단을 파악하고 그 특성을 이해하고자 하였다. 이를 위해 세월호 침몰 사고 당시 자원봉사인력의 소진 양상에 따른 군집을 확인하고, 이차외상 스트레스 증상과 세상에 대한 신념과 같은 재난 관련 반응에서 집단 간 차이가 있는지 살펴보았다. 구체적으로, 사고 당시 재난지원 봉사활동에 참여한 성인 70명을 대상으로 심리적 소진의 하위요인(정서적 고갈, 개인적 성취감, 비인간화)을 사용한 군집분석을 실시하였다. 그 결과, '낮은 소진-높은 성취'를 나타낸 집단 1(n=17), '높은 소진-높은 성취'를 보인 집단 2(n=28), '낮은 소진-낮은 성취'를 보인 집단 3(n=25)과 같이 총 세 집단으로 분류되었다. 각 집단의 특성을 이해하기 위해 인구통계학적 특성과 재난지원활동 특성의 차이 검정을 실시한 결과, 재난지원활동 내용과 기간이 집단 간에 유의한 차이가 있음을 확인하였다. 다음으로, 이차외상스트레스 증상과 세상에 대한 신념의 집단 간 차이를 살펴본 결과, 집단 2의 경우 다른 집단에 비해 이차외상스트레스 증상의 수준이 높았으며, 집단 1의 경우 다른 집단에 비해 긍정적 자기에 대한 가치감 수준이 높은 것으로 나타났다. 이를 바탕으로 각 집단에서 요구하는 개인·기관 차원에서의 예방과 개입 방안에 대해 논의하였으며, 연구의 제한점을 기술하고 후속 연구를 위해 제언하였다.

  • PDF

압밀시험의 수치해석에 의한 MCC 모델과 SSC 모델 비교 (Comparison of MCC and SSC Models Based on Numerical Analysis of Consolidation Test)

  • 권병해;임성훈
    • 한국농공학회논문집
    • /
    • 제66권2호
    • /
    • pp.1-12
    • /
    • 2024
  • In order to integrate two consolidation theories of Terzaghi's consolidation theory and Mesri's secondary compression theory and to identify a model suitable for analyzing stress-strain behavior over time, numerical analysis on consolidation tests were conducted using a modified cam-clay model and a soft soil creep model and the following conclusions were obtained. The results of numerical analysis applying the theory that a linear proportional relationship is established between the void ratio at logarithmic scale and the permeability coefficient at logarithmic scale is better agreement with the result of oedometer test than the results of applying constant hydraulic conductivity. The modified cam-clay model is a model that does not include secondary compression, but the slope of the normal consolidation line corresponding to the compression index of the standard consolidation test includes secondary compression, so the actual settlement curve over time is lower than the predicted value through numerical analysis. It always gets smaller. Other previous studies that applied Terzaghi's consolidation theory to consolidation test analysis showed the same results and were cross-confirmed. The soft soil creep model, which includes secondary compression in the theory, showed good agreement in all sections including secondary compression in the consolidation test results. It was judged appropriate to use a soft soil creep model when performing numerical analysis of soft clay ground.