• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.3
• /
• pp.260-265
• /
• 1991

The effective method to detect the mutagenicity of N-nitrosodimethylamineI (NDMA) by using Salmonella/microsome assay was studied. The Effect of vitamin C on the mutagenicity of the formed NDMA and during the formation of NDMA from nitrite and secondary amine was also investigated. Aroclor 1254-induced hamster S9 mix was more effective in activation NDMA than rat S9 mix induced by Aroclor 1254 or phenobarbital. Dimethyl sulfoxide and ethanol suppressed the mutagenic effect of NDMA, however, phosphate butter (pH 7.4), distilled water, 95% methanol and Tween 80 + water (1 : 4) were the appropriate dissolving system in the mutagenicity test of NDMA. Vitamin C did not show any inhibitory effect on the mutagenicity of the formed NDMA. However, the revertants of Salmonella typhinutrium TA 100 were significntly reduced (p<0.05) when vitamin C was added to the reaction mixture of nitrite and dimethylamine during the formation of NDMA. The amount of the formed NDMA was analyzed using HPLC and the level was decreased by about 95%. Thus it was concluded that vitamin C inhibited greatly the formation of NDMA from nitrite and dimethylamine.

• Archives of Plastic Surgery
• /
• v.40 no.2
• /
• pp.117-122
• /
• 2013

Background Latissimus dorsi (LD) myocutaneous flap is a popular method of breast reconstruction which can be associated with high incidence of seroma formation. Quilting sutures at the harvest site are used to reduce this. Barbed sutures are self anchoring sutures which avoid multiple knotting and can be useful in quilting. Methods A retrospective analysis of prospectively maintained database of patients who underwent LD flap breast reconstruction between January 2009 and January 2011 was carried out. Seroma formation at the harvest site, wound related complications, inpatient stay and duration of surgery were analysed and a comparison was made between two groups where quilting was done with barbed (V-Loc) suture and conventional polydioxanone (PDS) II sutures. Results Fifty-seven patients were included of which 33 had quilting by V-Loc sutures and in 24 patients PDS II suture was used. Median age in the PDS group was 55 years (interquartile range [IQR)], 45 to 61 years) which was comparable to the V-Loc group (53 years [IQR, 48 to 59 years]; P-value 0.948). Sixteen patients (28%) had significant seroma formation and 5 (9%) patients developed superficial wound dehiscence. Incidences of seroma or wound complications were comparable (P-value 0.378 and 1.00, respectively). Secondary outcomes such as total duration of surgery, total inpatient stay, total amount of drain at the donor site were also similar in two groups. Conclusions Use of barbed sutures for quilting the donor site in LD flap reconstruction is a feasible option and the associated seroma formation and wound complications are comparable with conventional sutures.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.620-625
• /
• 2018

Liquid detergent based on sodium lauryl ethoxy sulfate (SLES) as main ingredient sometimes met gelling film on the surface when it is opened in the air. It was assumed because of the change of phase diagram of micelle by concentration change of surfactant, major ingredient of detergent when the water of detergent is evaporated. SLES showed strong hexagonal liquid crystal (LC) in 30~60 wt%, and lamellar LC over 60 wt%. In this research surface gelling formation of liquid detergent which is based on SLES as main ingredient was because of water evaporation. As water of detergent was evaporated, concentration of surfactant became higher. It was checked that surface gelling was LC of mixed surfactant system. Conclusionally we applied alpha olefin sulfonate (AOS) having good solubility, Sodium secondary alkane sulfonate (SAS) preventing hexagonal LC and hydrotrope sodium xylene sulfonate (SXS) and PEG1500 in order to prevent gelling film in SLES based liquid detergent. Like this, improved formula 4 and 5 can prevent the formation of gelling film on the surface of liquid detergent when it is opened in the air.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.6
• /
• pp.319-322
• /
• 1997

The optimal conditions for callus formation and plant regeneration were determined by the manipulation of culture method in unpollinated ovary culture of rice. The effect of cold pretreatment on callus formation and plant regeneration varied with duration of pretreatment. The maximum frequency (38.7%) of plant regeneration was obtained from the unpollinated ovary pretreated for 10 days at $12^{\circ}C$. The ability of callus formation and plant regeneration was higher on the medium with picloram (1 mg/L) than that of 2, 4-D (1 mg/L). However, the high concentration of picloram increased markedly the frequency of albino plant from unpollinated ovary-derived callus. Floral parts inoculated as a unit play important roles in callus formation and plant regeneration. Best result was obtained when ovary with partial cut glume, pedicel and secondary branch as a unit was cultured.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.215-227
• /
• 1980

The rock units of Goesan area in the Ogcheon metamor phic terrain established on the basis of field criteria should be redefined into following sequence. Based on shear senses in secondary small structures which are usually observable in the investigated area, the stratigraphy can be lithologically divided into the lower pelite, pebbly mudstone, upper pelite, quartzite and psammite unit in ascending order. This conclusion is in discordance with a previous opinion; Munjuri formation and Guryongsan formation may be equivalent to upper pelite unit, Iwonri formation and Hwanggangri formation to pebbly mudstone. From this, it may be inferred that isoclinal overturned folds repeatly occur in the area. The uranium bearing coaly thin layers in upper pelite unit have relatively broad exposures in Deogpyeongri block of Goesan area along culmination zone in the central part of the investigated area. It is believed that structural feature in the block recognized complexly refolded synform plunging to southwest. Mineralogical and radiometric studies were made on 135 representative samples from the Ogcheon Group of Korea. The mineralogy of all black slate samples is qualitatively similar but quantitatively ·different. The uranium distribution in the studied area show approximately log normal. Uranium in the black slates of the Ogcheon Group was deposited together under same physico-chemical environmental conditions. The chemical and geological factors that controlled the abundance of organic carbon and iron oxides also controlled the uranium content. The relationship of the major components to uranium can be expressed by the following regression equation: $Log(U\times10^4+1)$= 1.70999-0.00367(quartz)0.00512(micas)-0.00930 (other silicates)+0.01911 (iron oxides)-0.03389(other opaques)+0.02062(organic carbon).

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.353-359
• /
• 1987

The aim of the present study was to investigate the effects of growth rate on the biosynthesis of tylosin in Streptomyces fradiae. In order to elucidate the relation between the growth rate and the tylosin formation rate, the activities of enzymes involved in oxaloacetate metabolism were determined using cells grown at different growth rates in chemostats. As the results, it was found that the specific rate of tylosin formation($q_{p}$) was closely related to the specific cell growth rate and the maximum value of $q_{p}$ was 1.1mg tylosin, $q_{p}$ cell, $0.013h^{-1}$ at the growth rate $0.013h^{-1}$. However further increase in the growth rate over $0.013h^{-1}$ resulted in apparent decrease of $1_{p}$. The synthesis and activities of citrate synthase, aspartate aminotransferase, and PEP carboxylase were very low at lower growth rate. On the other hand, the activity and synthesis of methylmalonyl-CoA carboxyltransferase was closely related to tylosin formation. Therefore it was concluded that tylosin formation was apparently controlled by the growth rate.

• Journal of Distribution Science
• /
• v.21 no.12
• /
• pp.1-13
• /
• 2023

Purpose: the study aims to examine the impact of ICT on the formation of digital hubs in regions of Kazakhstan, specifically the influence of ICT costs on the level of innovation activity of enterprises, the number of its actors as legal entities by size and region, small and medium enterprises, universities and research and development organisations. Research design, data and methodology: the research methodology is based on the collection of secondary data from the official statistical yearbooks of the Bureau of National Statistics of the Republic of Kazakhstan and the use of quantitative methods, in particular, correlation analysis and multiple regression. Five indicators related to the formation of digital hubs in the regions of the country were selected. Results: the study revealed that ICT spending has an impact on the formation of digital hubs in regions, in particular on the development of the number of legitimate enterprises, SMEs and R&D organisations as actors in digital hubs. A positive dynamic in the growth of the number of actors is visible. However, the hypotheses on the impact of ICT costs on the number of universities and the level of innovation activity were not supported. Conclusions: based on the results of the study, recommendations such as government proposals on strategy development, funding projects of innovation and digital hubs, and business proposals on engaging local entities in digital transformation for the formation of digital hubs in the country's regions have been developed.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.97-103
• /
• 2009

A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.

• BMB Reports
• /
• v.40 no.2
• /
• pp.172-179
• /
• 2007

PCR-mediated recombination describes the process of in vitro chimera formation from related template sequences present in a single PCR amplification. The high levels of genetic redundancy in eukaryotic genomes should make recombination artifacts occur readily. However, few evolutionary biologists adequately consider this phenomenon when studying gene lineages. The cytosolic glyceraldehyde-3-phosphate dehydrogenase gene (GapC), which encodes a NADP-dependent nonphosphorylating glyceraldehyde-3-phosphate dehydrogenase in the cytosol, is a classical lowcopy nuclear gene marker and is commonly used in molecular evolutionary studies. Here, we report on the occurrence of PCR-mediated recombination in the GapC gene family of Hibiscus tiliaceus. The study suggests that recombinant areas appear to be correlated with DNA template secondary structures. Our observations highlight that recombination artifacts should be considered when studying specific and allelic phylogenies. The authors suggest that nested PCR be used to suppress PCRmediated recombination.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2003

The heat transfer and flow measurements on a cylindrical pedestal mounted on a flat surface with a turbulent impinging jet were made. The experiments were made for the jet Reynolds number of Re = 23,000, the dimensionless nozzle-to-surface distance of L/d = 2~10, the dimensionless pedestal height of H/D = 0~1.5. Measurements of the surface temperature and the Nusselt number distributions on the plate surface were made using liquid crystal and shroud-transient technique. Flow measurements involve smoke flow visualization and the wall pressure coefficient. The results show that the wall pressure coefficient sharply decreases along the upper surface of the pedestal. However, the pressure increases when the fluid escapes from the pedestal and then collides on the plate surface. The secondary maxima in the Nusselt numbers occur in the region of 1.0 $\leq$ r/d $\leq$ 1.9. Their values for the case of H/D = 0.5 are maximum 80% higher than those for other cases. The formation of the secondary maxima may be attributed to the reattachment of flow on the plate surface which was separated at the edge of the pedestal.