• 제목/요약/키워드: Secondary electron emission

검색결과 159건 처리시간 0.028초

스파트링 방법으로 제작된 MgO와 그 전기적 특성에 관한 연구 (The Study on the MgO thin film prepared by magnetron sputtering and its electrical characteristics)

  • 박정후;조정수;박명호
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1997년도 제13회 학술발표회 논문개요집
    • /
    • pp.169-172
    • /
    • 1997
  • MgO dielectric pprotection layer is ppreppared by R.F. reactive magnetron spputtering with Mg target under various conditions of spputtering ppressure, time and substrate tempperature. Discharge characteristics of ppDpp is also studied as a pparameter of MgO pprepparation conditions. As the working ppressure and substrate tempperature was increase, the discharge voltage was decreased. Two kinds of MgO ppreppared both spputtering and E-beam methods were stable after annealing at 35$0^{\circ}C$ for 120min. discharge voltage under 3 mixed gas(He+Xe0.2%+Ne30%) was V=130V, V=102V and ${\gamma}$ coefficient was twiced as much as that of dielectric layer.

  • PDF

Realization of High Luminous Efficacy PDP with Low Voltage Driving

  • Whang, Ki-Woong;Bae, Hyun-Sook;Jung, Hae-Yoon;Kwon, O-Hyung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.153-156
    • /
    • 2008
  • The use of high Xe content gas is a powerful method for improving the discharge efficacy in PDP, but the accompanying high driving voltage prevents it from being used aggressively. In this paper, we tried to find a method to lower the driving voltage under high Xe gas condition with a new protecting layer. The effective secondary electron emission caused by Xe ions can result in the low voltage driving in panels with high Xe content gas and more importantly high luminous efficacy which were confirmed with the computer simulation and panel experiment.

  • PDF

AC-PDP에서 MgO 증착조건에 따른 패널특성 연구 (Effect of MgO Deposition Condition on the Discharge Characteristic of AC-PDP)

  • 정주영;조성용;이돈규;이해준;이호준;박정후
    • 전기학회논문지
    • /
    • 제58권8호
    • /
    • pp.1566-1571
    • /
    • 2009
  • The discharge electrodes in ac PDP are coated with dielectric layer, and transparent MgO thin films are deposited on the dielectric layer. The main role of the MgO thin films in ac PDP is to protect the dielectric layer from sputtering by ion bombardment in the glow-discharge plasma. An additional important role of the MgO thin film is the high secondary electron emission coefficient which leads the low firing voltage and low cost of the PDP. In this paper, we investigated the relations of the crystal orientation about deposition thickness, deposition rate, temperature of substrate, and distance between the MgO tablet and the substrate. Additionally, we investigated the discharge characteristics of the AC PDP using nano-powder MgO tablet

Influence of gas mixing ration on secondary electron emission coefficient of MgO single crystal with different orientations and MgO protective layer

  • 임재용
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.234-234
    • /
    • 1999
  • AC-PDP(Plasma Display Panel)에 사용하는 MgO 보호막의 이차전자 방출계수(${\gamma}$)는 AC-PDP의 방전특성을 결정짓는 중요한 요소이다. MgO 보호막의 이차전자 방출계수는 AC-PDP에 주입하는 기체의 종류에 영향을 받는다. 현재 AC-PDP에는 방전특성의 향상과 VUV 발생을 위하여 He, Ne, Ar, Xe 등의 비활성기체를 두가지 혹은 세가지로 혼합한 혼합기체가 사용되고 있다. 기체를 혼합할 경우 Penning 효과에 의해 더 좋은 방전특성을 얻을 수 있는 것으로 알려져 왔으며, 이때의 적절한 혼합비율을 찾는 것은 AC-PDP의 효율 개선에 매우 중요하다. 이번 실험에서는 (111), (100), (110) 각각의 방향으로 배향된 MgO Bulk Crystal과 MgO 보호막의 이차전자방출계수를 He+Ne+Xe 삼원기체를 사용하였다. MgO 보호막은 실제 21inch 규격의 Panel을 사용하였으며, 혼합기체의 혼합비율의 Ne:Xe을 99:1, 98:2, 96:4, 93:7과 He+Ne+Xe의 삼원기체로 다양하게 변화시켜 가며 실험하였다.

  • PDF

Se와 $Sb_2S_3$를 이용한 광도전막의 제작과 그 특성 (Fabrication and Properties of Photoconductive Multilayer Using Se and $Sb_2S_3$)

  • 오상광;박기철;김건일;김기완
    • 대한전자공학회논문지
    • /
    • 제24권4호
    • /
    • pp.646-651
    • /
    • 1987
  • The photoconductive multilayer composed of glassy, porous, and fine-grained layers was fabdricated with Se and Sb2S3 by vacuum evaporation in order to be used as vidicon target. And its electrical, optical properties were investigatee. The fabrication conditions were as follow: the glassy layer was first deposited to have the thickness of 6500 \ulcornerat the deposition rate of 250\ulcornersec. High photosensitivity(\ulcorner=1) was obtained but its shortcoming was high dielectric constant. Therefore, the porous layer was added to lower dielectric constant and had 7500\ulcornerthick in the argon gas ambikent of 7x10-\ulcorner And the fine-grained layer was formed to prevent secondary electron emission and obtain good resolution. Its thickness was about 1700\ulcorner For the given vidicon target, the light transfer characteristic, that is, photosensitivity (\ulcorner) was measured to be 0.8 at the applied voltage of 25V. The spectral sensitivity was quite similar to that of the human eyes.

  • PDF

Influence of atmospheric air-holding time before air annealing on the secondary electron emission coefficient(${\gamma}$) from a MgO protective layer

  • 정진만
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.202-202
    • /
    • 2000
  • AC-PDP(Plasma Display Paner)는 기체 방전을 이용한 디스플레이로서 기체에 직접 노출되는 MgO 보호막의 2차전자 방출계수(${\gamma}$는 AC-PDP의 방전특성을 결정짓는 중요한 요소이다. MgO 보호막의 이차전자 방출계수는 AC-PDP에 주입하는 기체의 종류, 결정 방향성과 표면오염상태 등에 영향을 받는다. 본 연구에서는 유리 기판위에 Al 전극을 증착, 에칭후 screen printing으로 유전체를 도포, 소성 한 21inch 규격의 test panel에 MgO 보호막을 E-Beam으로 5000$\AA$ 증착한 후 MgO 보호막을 대기에 노출되는 시간간격을 변수로 하여 대기 열처리 한 MgO보호막의 2차 전자방출계수를 ${\gamma}$-FIB(Focused Ion Beam) 장치를 이용하여 측정하였다. 그리고 대기 노출 간격은 1분, 5분, 20분으로 하여 2차 전자방출계수를 측정하였고, 2차전자방출계수 측정 시 가속전압은 50V에서 200V까지 변화를 주었으며, Ne+을 사용하여 1.2$\times$10-4Torr의 진공도를 유지하며 측정하였다. 또한 각각의 MgO막의 에너지 갭을 광학적 방법을 이용하여 구하였다.

  • PDF

반응성 스파트링에 의한 PDP용 MgO 보호층 형성과 그 방전특성에 관한 연구 (A Study on the Discharge Characteristics and Formation of MgO Protection Layer for PDP by Reactive Sputtering)

  • 하홍주;이우근;남상옥;박영찬;조정수;박정후
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1996년도 추계학술대회 논문집
    • /
    • pp.357-360
    • /
    • 1996
  • MgO protection layer in ac PDP(plasma display panel) prevents the dielectric layer from ion bombarding in discharge plasma. The MgO layer also has the additional important role in lowering the firing voltage due to a large secondary electron emission coefficient. Until now, the MgO protection layer is mainly prepared by E-beam evaporation. In this study, MgO protection layer is prepared on dielectric layer of ac PDP cell by reactive R.F magnetron sputtering with Mg target under various conditions of oxygen partial pressure. Discharge characteristics of PDP is also studied as a parameter of MgO preparation conditions. The sputtered MgO shows the better discharge characteristics compared with MgO deposited by E-beam evaporator.

  • PDF

Antennal Sensory Organs in the Female Millipede Orthomorphella pekuensis (Polydesmida: Paradoxosomatidae)

  • Chung, Kyung-Hwun;Moon, Myung-Jin
    • Animal cells and systems
    • /
    • 제10권4호
    • /
    • pp.183-189
    • /
    • 2006
  • The fine structural characteristics of the antennal sensory organs of a female millipede, Orthomorphella pekuensis, were observed with field emission scanning electron microscopy. On the surface of the antenna, four basic types of sensory receptor with the function of either mechanical or olfactory reception are identified in this female millipede. Of these, chaetiform sensilla (CS) and trichoid sensilla (TS) are related to mechanical reception, and four large apical cone sensilla (AS) and three subtypes of basiconic sensilla ($BS_1,\;BS_2,\;BS_3$) are likely to function in olfactory reception, as these receptors have porous structure commonly. Although this millipede also possess a number of primary or secondary sexual characters to improve the efficiency of reproduction, we could not observe their prominent sexually dimorphic characters in the antennal sensilla with the exception of minor structural and numerical differences.