• 천문학회보
• /
• 제36권2호
• /
• pp.132.2-132.2
• /
• 2011

We are developing Adaptive Optics (AO) system for astronomical use. The He-Ne laser works as an artificial light source. The tip-tilt correction servo is added to our AO system. The tip-tilt term, among the Zernike terms, is the biggest contributor of wavefront deformation caused by atmospheric turbulence at small telescopes. The tip-tilt correction servo consists of a Piezo tip-tilt platform with a mirror, a quadrant photodiode as a tip-tilt sensor, and controllers. The Shack-Hartmann wavefront sensor measures the residual wavefront errors and they are corrected by the MEMS (Micro Electro Mechanical System) deformable mirror. The MEMS deformable mirror allows the compact size at low cost compare to adaptive secondary mirror and other deformable mirrors. As the frame rates of the MEMS deformable mirror is about tens of kHz, the frame rates of the detector in wavefront sensor is the bottleneck of the wavefront correction speed. For faster performance, we replaced a CCD which provides frame rates only 70 Hz with a CMOS with frame rates up to 450 Hz.

• Journal of Korean Neurosurgical Society
• /
• 제64권6호
• /
• pp.843-852
• /
• 2021

The purpose of this review was to synthesize the research on global spinal alignment and reciprocal changes following cervical or thoracolumbar reconstruction surgery. We carried out a search of PubMed, EMBASE, and Cochrane Library for studies through May 2020, and ultimately included 11 articles. The optimal goal of a truly balanced spine is to maintain the head over the femoral heads. When spinal imbalance occurs, the human body reacts through various compensatory mechanisms to maintain the head over the pelvis and to retain a horizontal gaze. Historically, deformity correction has focused on correcting scoliosis and preventing scoliotic curve progression. Following substantial correction of a spinal deformity, reciprocal changes take place in the flexible segments proximal and distal to the area of correction. Restoration of lumbar lordosis following surgery to correct a thoracolumbar deformity induces reciprocal changes in T1 slope, cervical lordosis, pelvic shift, and lower extremity parameters. Patients with cervical kyphosis exhibit different patterns of reciprocal changes depending on whether they have head-balanced or trunk-balanced kyphosis. These reciprocal changes should be considered to in order to prevent secondary spine disorders. We emphasize the importance of evaluating the global spinal alignment to assess postoperative changes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.259-261
• /
• 1996

In this paper, active input filter for power factor correction(PFC) circuit employing ripple arrent and voltage cancellation is proposed to reduce filter's size and cost, and to make filter design easy. Switching ripple current and voltage can be sensed through the secondary windings of filter inductor. Single stage passive filter can achieve high order filter characteristics by using active ripple current and voltage cancellation technique. Conventional high order passive filter and its problems are suggested. Analysis of active filter and design procedure are detailed. Simulation result is presented to verify high order filter characteristics of proposed scheme.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권6호
• /
• pp.360-365
• /
• 2012

The simultaneous surgical correction of bilateral cleft lip and nasal deformity has become a more common surgical technique that has greatly changed conventional strategies for secondary nasal correction. Mulliken has been known as one of the earliest proponents for the synchronous repair of bilateral cleft lip and nasal deformity, and he emphasized the responsibility of the treating surgeon to evaluate nasolabial growth by comparing anthropometric measurements with age-matched normal patients. Good outcomes from this surgical method have been reported in clinical cases worldwide. Herein, we describe the management of two cases of bilateral cleft repair, following the principles and methods established by Mulliken. We also provide a relevant review of the literature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2795-2797
• /
• 1999

Several power factor correction(PFC) circuits are presented to achieve high PF electronic ballast for both voltage-fed and current-fed electronic ballast. The proposed PFC circuits use valley-fill(VF) type DC-link stages modified from the conventional VF circuit to adopt the charge pumping method for PFC operations during the valley intervals. In voltage-fed ballast, charge pump capacitors are connected with the resonant capacitors. In current-fed type, the charge pump capacitors are connected with the additional secondary-side of the power transformer. The measured PF and THD are higher than 0.99 and 15% for all proposed PFC circuits. The lamp current CF is also acceptable in the proposed circuits. The proposed circuit is suitable for implementing cost-effective electronic ballast.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권6호
• /
• pp.496-500
• /
• 2005

A 22-year-old male patient had developed a submasseteric abscess secondary to a mandibular osteomyelitis at the age of 7 years old. The initial presentation at that time seems to be acute suppurative parotitis. The computed tomographic scans taken before surgery demonstrated diffuse deformity, sclerotic change and osteolytic lesion in the mandible. There was no marrow space on both sides of mandibular ramus and thin-walled cortical bone was seen. So, from the results of the computed tomography, the surgery was performed intraoral vertical ramus osteotomy (IVRO) instead of performing the more commonly used bilateral sagittal split ramus osteotomy (BSSRO). In this report, we present a case of surgical correction of mandibular prognathism with fibrous-osseous lesion of mandible with using IVRO.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.15-17
• /
• 2003

In this paper, direct thrust control(DTC) scheme is applied to a linear induction motor(LIM) with cage-type secondary. The line voltages and phase currents are detected and a thrust correction coefficient considering the end effect of the LIM is introduced in order to Improve the accuracy of thrust estimation in the DTC implementation. Experimental results for thrust and flux responses are presented.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.606-616
• /
• 2003

A numerical analysis has been conducted in order to simulate the characteristics of complex flow through linear cascades of high performance turbine blade with/without tip clearance by using a pressure-correction based, generalized 3D incompressible Wavier-Stokes CFD code. The development and generation of horseshoe vortex, passage vortex, leakage vortex, tip vortex within tip clearance, etc. are clearly identified through the present simulation which uses the RNG k-$\varepsilon$ turbulent model with wall function method and a second-order linear upwind scheme for convective terms. The present simulation results are consistent with the generally known tendency that occurs in the blade passage and tip clearance. A 3D model for secondary and leakage flows through turbine cascades with/without tip clearance is also suggested from the present simulation results, including the effects of tip clearance height.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.9-11
• /
• 2004

This paper presents a position control system for a linear induction motor(LIM) with cage-type secondary using direct thrust control(DTC). The position controller, that combines the merits of integral-proportional(IP) speed control, is designed for the LIM. The actual position of the LIM is defected by the linear scale the resolution of 100. Thrust correction coefficient due to the end effect of the LIM is utilized in estimating actual thrust. As a result, responses of the position, speed, thrust, and flux are shown.

• Journal of Chest Surgery
• /
• 제27권3호
• /
• pp.230-233
• /
• 1994

A 21-year-old man with atrioventricular[AV] reentry tachycardia secondary to concealed accessory AV connection underwent surgical division of two accessory pathways following failure of radiofrequency catheter ablation. pathways were located in the left free wall area.Before cardiopulmonary bypass, the epicardial mapping confirmed the existence and localization of two accessory pathways. The patient was approached through a left atriotomy with a dissection of the left free wall area beginning with an internal mapping was carried out after separation from cardiopulmonary bypass to confirm the absence of retrograde conduction of accessory pathway. Five weeks after surgery, the electrophysiololgic study demonstrated no retrograde conduction through two accessory pathways.