• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.126-131
• /
• 2003

The acceptance test of KTX has been performed in Korea. During the test, lateral vibration of carbody over the accepted value called sway was found. KTX has 20 car trainset formation whose trailer cars are linked by articulate bogies. So this study is performed to see the effects of long trainset formation on vehicle dynamics and the train stability by 20 car vehicle model. Firstly the reliable vehicle model which shows well the tendencies appeared in the tests on the high speed test line is required to find the cause of lateral vibration and the countermeasure. Vehicle model was made .for the. analysis with VAMPIRE. The analysis results show that secondary air spring lateral stiffness is the most significant parameter to cause carbody lateral vibration. Mode analysis results show that the least damped mode shape is similar to the vibration pattern shown in the tests that the amplitude of the motion increases along the train set and decreases in the tail part. For the case of short train formation with 7 or 10cars, sway does not happen. But in the case of longer train formation with 16 or 20 cars, sway was found.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.122-128
• /
• 2003

The acceptance test of KTX has been performed in Korea. During the test, lateral vibration of carbody over the accepted value called sway was found. Many activities have been taken to find the cause of the vibration and the counter-measure. KTX has 20 car trainset formation whose trailer cars are linked by articulate bogies. So this study is performed to see the effects of long trainset formation on vehicle dynamics and the train stability by 16 car vehicle model. Firstly the reliable vehicle model which shows well the tendencies appeared in the tests on the high speed test line is required to find the cause of lateral vibration and the countermeasure. Vehicle model was made for the analysis with VAMPIRE. The analysis results show that secondary air spring lateral stiffness is the most significant parameter to cause carbody lateral vibration. Mode analysis results show that the least damped mode shape is similar to the vibration pattern shown in the tests that the amplitude of the motion increases along the train set and decreases in the tail part. The lateral vibration was "appeared at the speed range between 100km/h and 200km/h and disappeared at the low speed and the high speed.

• Earthquakes and Structures
• /
• 제22권3호
• /
• pp.231-243
• /
• 2022

Beam-column joints (BCJs) are recognized among the most crucial zones in reinforced concrete structures, as they are the critical elements subjected to a complex state of forces during a severe earthquake. Under such conditions, BCJs exhibit behaviors with impacts that extend to the whole structure and significantly influence its ductility and capability of dissipating energy. The focus of this paper is to investigate the effect of undamaged transverse beam (secondary beams) on the ductility of concrete BCJs reinforced with conventional steel and shape memory alloys bars using pushover analysis at tip of beam under different axial load levels at the column using a nonlinear finite element model in ABAQUS environment. A numerical model of a BCJ was constructed and the analysis outcomes were verified by comparing them to those obtained from previous experiments found in the literature. The comparison evidenced the capability of the calibrated model to predict the load capacity response of the joint. Results proved the ability of undamaged secondary beams to provide a noticeable improvement to the ductility of reinforced concrete joints, with a very negligible loss in load capacity. However, the effect of secondary beams can become less significant if the beams are damaged due to seismic effects. In addition, the axial load was found to significantly enhance the performance of BCJs, where the increase in axial load magnified the capacity of the joint. However, higher values of axial load resulted in greater initial stiffness of the BCJ.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.909-914
• /
• 2009

철도차량의 주행안전성과 승차감을 결정하는데 있어서 현가장치는 중요한 요소이며, 현가장치 강성은 차량 설계 단계의 중요한 설계변수이다. 고속에서의 주행안전성을 위해 1차 현가장치에 강한 강성을 부여하는데 이는 곡선 주행성능을 감소시키는 단점이 있어 주행안전성과 곡선주행성능을 절충하면서 현가장치의 강성을 조절하고 있다. 본 연구에서는 철도차량의 현가장치 강성을 변화시켜 가면서 주행안전성 향상을 위한 현가장치를 최적화하는데 목적을 두고 있다. 현가장치 최적화를 위해 1, 2차 현가장치의 위치 및 길이, 폭, 강성, 감쇠력 등을 설계 변수로 하여 해석을 진행하였다. 현가장치 최적화 해석결과, 1, 2축 내 외측 차륜의 탈선계수 값이 초기 모델과 비교하여 감소한 결과를 확인할 수 있었다.

• The Korean Journal of Pain
• /
• 제11권1호
• /
• pp.138-142
• /
• 1998

Fibromyalgia syndrome is defined as a diffuse, aching musculoskeletal pain associated with multiple and discrete predictable tender points along with stiffness. A primary form associated without any disease is uncommon compared to the secondary diffuse fibrositis. We witnessed a case of a primary fibromyalgia syndrome. A 28-year-old woman was suffering from pain on posterior neck, right shoulder, upper back, left hand and arm for two years. She also complained of morning stiffness, fatigue, and headache. We treated her with stellate ganglion block with 0.25% bupivacaine, medication that included amitriptyline, TENS and superlizer. We also recommended aerobic exercise.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.53-74
• /
• 2016

This paper presents an experimental study on constructing a tunable secondary suspension for high-speed trains using magneto-rheological fluid dampers (referred to as MR dampers hereafter), in the interest of improving lateral ride comfort. Two types of MR dampers (type-A and type-B) with different control ranges are designed and fabricated. The developed dampers are incorporated into a secondary suspension of a full-scale high-speed train carriage for rolling-vibration tests. The integrated rail vehicle runs at a series of speeds from 40 to 380 km/h and with different current inputs to the MR dampers. The dynamic performance of the two suspension systems and the ride comfort rating of the rail vehicle are evaluated using the accelerations measured during the tests. In this way, the effectiveness of the developed MR dampers for attenuating vibration is assessed. The type-A MR dampers function like a stiffness component, rather than an energy dissipative device, during the tests with different running speeds. While, the type-B MR dampers exhibit significant damping and high current input to the dampers may adversely affect the ride comfort. As part of an ongoing investigation on devising an effective MR secondary suspension for lateral vibration suppression, this preliminary study provides an insight into dynamic behavior of high-speed train secondary suspensions and unique full-scale experimental data for optimal design of MR dampers suitable for high-speed rail applications.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.565-573
• /
• 1999

Hihg Tensile Steel enables to reduce the plate thickness comparing to the case when Mild Steel is used. From the economical view points this is very preferable since the reduction in the hull weight. however to use the High Tensile Steel effectively the plate thickness may become thin so that the occurrence of buckling is inevitable and design allowing plate buckling may be necessary. If the inplane stiffness of the plating decreases due to buckling the flexural rigidity of the cross sect6ion of a ship's hull also decreases. This may lead to excessive deflection of the hull girder under longitudinal bending. In these cases a precise estimation of plate's behavior after buckling is necessary and nonliner analysis of isolated and stiffened plates is required for structural sys-tem analysis. In this connection this paper discusses nonlinear behaviour of thin plate under thrust. Based on the analytical method elastic large deflection analysis of isolated plate is perform and simple expression are derived to evaluated the inplane rigidity of plates subjected to uniaxial compression.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1571-1578
• /
• 2013

With the emergence of high-integration array and large area panel process, the need to minimize the generation of particles in the field of semiconductor, LCD and OLED has grown. As an alternative to the conventional roller system, a contactless magnetic conveyor has been proposed to reduce the generation of particles. An EM-PM hybrid which is one of magnetic levitation types is already proposed for the conveyor system. One of problems pointed out with this approach is the vibration caused by the dynamic interaction between conveyor and rail. To reduce the vibration, the introduction of a secondary suspension system which aims to decouple the levitation electromagnet from the main body is proposed. The objective of this study is to develop a dynamic model for the magnetically levitated conveyor, and to investigate the effect of the introduced suspension system. An integrated model of levitation system and rail based on 3D multibody dynamic model is proposed. With the proposed model, the dynamic characteristics of maglev conveyor system are analyzed, and the effect of the secondary suspension and the stiffness and damping are investigated.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.497-510
• /
• 2017

A framed structure may be composed of two sub-structures, which are linked by a hinged joint. One sub-structure is the primary system and the other is the secondary system. The primary system, which is subjected to the periodic external load, can give rise to an auto-parametric resonance of the second system. Considering the geometric-stiffness effect produced by the axially internal force, the element equation of motion is derived by the extended Hamilton's principle. The element equations are then assembled into the global non-homogeneous Mathieu-Hill equations. The Newmark's method is introduced to solve the time-history responses of the non-homogeneous Mathieu-Hill equations. The energy-growth exponent/coefficient (EGE/EGC) and a finite-time Lyapunov exponent (FLE) are proposed for determining the auto-parametric instability boundaries of the structural system. The auto-parametric instabilities are numerically analyzed for the two frames. The influence of relative stiffness between the primary and secondary systems on the auto-parametric instability boundaries is investigated. A phenomenon of the "auto-parametric internal resonance" (the auto-parametric resonance of the second system induced by a normal resonance of the primary system) is predicted through the two numerical examples. The risk of auto-parametric internal resonance is emphasized. An auto-parametric resonance experiment of a ${\Gamma}$-shaped frame is conducted for verifying the theoretical predictions and present calculation method.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.81-87
• /
• 2017

본 연구는 고속열차 시운전 시험과 이에 따른 주행동특성 고찰 및 개선에 관한 것이다. 고속열차 시운전 시험을 통한 선행 연구에서 도출한 요댐퍼 설치 방법에 따른 후미 진동 개선 방안을 실제 고속철도 차량의 시운전시에 적용하여 후미 진동 저감 효과가 있음을 확인하였다. 또한 전체 차량에 대한 진동저감 방안을 동역학 해석 소프트웨어를 사용하여 수치 해석적 방법으로 도출하였으며, 그 효과를 시운전 시험을 통하여 확인하였다. 개선된 설계안은 실제 2층 고속열차 객차에 적용되어 주행동특성 문제없이 시운전을 진행하였다. 차세대 고속열차 임계속도에 영향을 미치는 현가장치 파라미터들에 대한 민감도 분석을 수행하였으며, 임계속도에 크게 영향을 미치는 4개의 설계변수를 도출하였는데, 이는 1차 탄성조인트 열차진행 방향 강성, 2차 요댐퍼 시리즈 강성, 2차 횡댐퍼 댐핑계수, 차간 댐퍼 댐핑계수 순이었다. 이 설계변수에 대한 최적화를 통하여 임계속도를 23.3% 향상시키는 현가장치 파라미터를 제시하였으며, 이는 차세대 고속열차 상용화 모델의 설계에 이용될 수 있다.