• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.1
• /
• pp.123-127
• /
• 2012

An experiment was carried out to boost the production of tasar crops through application of secondary nutrients. Different combinations of secondary nutrients were prepared and its effect was studied on the yield and quality of leaves of tasar food plant Terminalia tomentosa W & A with 2.4 m ${\times}$ 2.4 m spacing and cocoon characters of tasar silkworm Antheraea mylitta Drury reared on them. Among different combinations of secondary nutrients, foliar application of magnesium sulphate (2%, w/v) and basal application of 3 quintal/ha of calcium carbonate (secondary nutrient combination SM5) was found to be the best in crop improvement. It improves the quantity and quality of leaves as well as the commercial characters of cocoons. As a result, silk production improves. Under this combination, leaf yield increased by 26.55% in comparison to control. Average increase in moisture, total mineral, crude protein and total carbohydrate was 3.26%, 20.84%, 15.39% and 17.85% respectively as compared with control. Further, bio assay studies revealed that average larval weight, E.R.R., cocoon weight, shell weight and silk ratio percent increased by 11.25%, 25.71%, 20.05%, 35.14% and 12.17% respectively over control which indicates that secondary nutrient combination $SM_5$ has significant role in improving the production of tasar crops.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.164-171
• /
• 2004

Active control techniques have been used in wide areas of noise and nitration control engineering and a noise barrier is one of them. Omoto's work in 1993 would be one of the fundamental and systematic studies on the actively controlled noise barrier, in which he used equal number of control sources and error sensors. The error sensors were placed uniformly along the top edge of the noise barrier with equal distance apart and the control sources were placed in the exactly same way some distance apart from the error sensors. Since then, a couple of studies were made on the secondary sources'arrangement rather than the optimality of secondary source positions. Shao's results showed that arc shaped arrangement for secondary sources is better than the straight line one, and later work of Yang showed that the more important factor is the average distance between the primary source and secondary sources. However, since these studies were all executed with a simple uniform distribution of the secondary sources along the straight line or arc, it is difficult to conclude which arrangement is superior In order for the fare comparison. the optimality of the source positions in each arrangement must be given in prior. The primary goal of this study is focused on this aspect and some major factors were investigated and compared. The computer simulation results showed that the arc shaped arrangement is marginally better than the straight line one, and more importantly slightly tuned position can greatly improve the performance of the control system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.4
• /
• pp.179-186
• /
• 2015

In this study, the actual energy consumption of the secondary side District Heating System (DHS) with different hot water supply temperature control methods is compared. The two methods are Outdoor Temperature Reset Control and Outdoor Temperature Predictive Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side system, the results show that the Outdoor Temperature Predictive Control method saves more energy. In general, the Outdoor Temperature Predictive Control method lowers the supply temperature of hot water, and it reduces standby losses and increases the overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, the Outdoor Temperature predictive Control method saves about 6.6% of energy when compared to the Outdoor Temperature Reset Control method. Also, it is found that at partial load condition, such as during daytime, the fluctuation of hot water supply temperature with Outdoor Temperature Reset Control is more severe than that with Outdoor Temperature Predictive Control. Thus, it proves that Outdoor Temperature Predictive Control is more stable even at partial load conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.143-149
• /
• 2011

In this paper, IIR structures are proposed to reduce the computation complexity of the secondary-pass estimation in active noise control(ANC) systems. However, there are stability problems of using IIR models to reduce the computation complexity in ANC systems. To overcome these problems, we propose a stabilizing procedure of recursive least mean squares (RLMS) algorithms for eatimating the parameters of IIR models of the secondary path transfer functions. The multichannel ANC systems are implemented by using the TMS320C6713 DSP board to test the performance of computation complexity and stability of the proposed methods. Comparing the IIR filters with the FIR filters, the IIR filters can reduce 50[%] of the computation and obtain similar noise reduction result.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.53-65
• /
• 1992

For improving the performance of maglev systems with a combined lift and guidance, it is suggested that the multivariable control systems and a secondary suspension should be added. The former is required to reject both track irregularities in vertical disturbances and wind gusts in lateral disturbances, and the latter to guarantee passengers against an unsatisfied criteria in ride quality. In this paper, bond graph model for the study of nonlinear dynamics of maglev systems with a combined lift and guidance is presented briefly. And, the secondary suspension is analyzed to understand the role of stiffness and damping factors in passive devices. Finally, LQG/LTR mulitivariable control systems are designed for the overall maglev systems with and without secondary suspension, and then the system performances in these two cases are evaluated.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1042-1045
• /
• 2000

Speed control without speed sensor is expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper investigates a novel speed estimation method of I.M considering the secondary resistance identification based on the transientless torque control technique. Especially, this paper aimed at the identification of the secondary resistance simultaneously with speed estimation. For this, the secondary flux with some frequency is controlled independently on torque. The proposed speed estimation method is derived from a motor circuit equation theoretically and also it can be conducted easily by detecting primary motor currents and primary voltage commands at every sampling time. Some numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter and experimental results are performed to verify the proposed method.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.4
• /
• pp.674-682
• /
• 2011

The present study was undertaken to investigate the effect of acupuncture & moxibustion therapy on the hair follicle growth of skin 5 days and 10 days by macroscopic, microscopic and immunohistochemical methods. The results were as follows : Macroscopic hair follicle growth of plum-blossom needle treated group and strong moxibustion treated group was more increase than that of control group. Microscopic hair follicle growth of plum-blossom needle treated group and strong moxibustion treated group was hair growing cycle, anagen phase VI and that of control group and weak moxibustion treated group was hair growing cycle, anagen phase IV. Immunohistochemical observations on the expression of various growth factors, enzyme and receptor in hair follicle cycle after local treatment of acupuncture & moxibustion therapy are as follows: Expression of fibroblast growth factor was more intense in epidermis in plum-blossom needle treated group, epidermis and secondary hair germ cells in strong moxibustion treated group than control group. Expression of epidermal growth factor was more intense in epidermis in all experimental groups, and secondary hair germ cells in moxibustion treated group than control group. Expression of c-kit receptor was more intense in epidermis, secondary hair germ cells, outer root sheath in all experimental groups than control group. Expression of protein kinase C-${\alpha}$ was more intense in epidermis, secondary hair germ cells, outer root sheath in all experimental groups than control group. Expression of vascular endothelial growth factor was more intense in epidermis, bulge, secondary hair germ cells, outer root sheath in plum-blossom needle treated group and strong moxibustion treated group than control group. We concluded that acupuncture & moxibustion therapy related to the expression of various growth factors, enzymes and receptor on the hair growth cycle for hair growth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.376-379
• /
• 2004

The purpose of this work is to develop an effective active control system for combustion instabilities of premixed combustors. For the first step, the natural modes of combustion oscillation were investigated for a methane-air premixed combustor and the controls by secondary fuel injection were examined. The main premixed flame is stabilized by a swirler with orifices for secondary injection installed on the central hub. For sensing purposes, a pressure transducer and a chemiluminescence sensor were placed on the appropriate positions. The acoustic characteristics and the source of the oscillation were analyzed by those signals. To test the controllability, two methods of actuations by secondary fuel injection were examined. One is the open loop control and the other is the closed loop control. The comparison of the reduction levels of p $_{rms}$ shows that the closed loop control with a phase-shift injection performs best in this condition.ition.n.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.106-108
• /
• 2001

This paper presents the comparison of three methods which determines the voltage control area for the secondary voltage control in power system. Each secondary control area is sufficiently uncouped from its neighbours for the controls within a area to be slightly influenced by the actions carried out in the other areas. Results obtained using a modifed 48bus test system are presented illustrating the applicability of the approach.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1650-1657
• /
• 2017

In this study, the distributed secondary voltage control of islanded microgrids with multi-agent consensus algorithm is investigated. As an alternative to a time-triggered approach, an event-triggered scheme is proposed to reduce the communication load among inverter-based distributed generators (DGs). The proposed aperiodic control scheme reduced unnecessary utilization of limited network bandwidth without degrading control performance. By properly establishing a distributed triggering condition in DG local controller, each inverter is only required to send voltage information when its own event occurs. The compensation of voltage amplitude deviation can be realized, and redundant data exchange related to fixed high sampling rate can be avoided. Therefore, an efficient use of communication infrastructure can be realized, particularly when the system is operating in steady state. The effectiveness of the proposed scheme is verified by simulations on a microgrid test system.