• 제목/요약/키워드: Secondary Air System

검색결과 272건 처리시간 0.026초

소형궤도 열차용 유도 전력 전송 시스템 특성해석 (Characteristic Analysis of Inductive Power Transfer System for PRT)

  • 민병훈;이병송
    • 조명전기설비학회논문지
    • /
    • 제21권3호
    • /
    • pp.35-43
    • /
    • 2007
  • 본 논문에서는 전자 유도 법칙을 이용한 차량용 유도 전력 집전장치가 제안하였으며 전력 전송 특성을 개선하기 위한 전력 집전체의 몇 가지 설계에 관련된 개점을 제시하였다. 또한 다양한 공진 주파수로 동작되는 직렬 공진 컨버터와 연결하여 전력 전송 시스템의 해석을 나타내었다. 동작 주파수와 파라미터의 변동에 대한 시스템의 민감도가 고려되며, 유도 전력 전송 시스템에 있어서 전력은 코일이나 트랙의 형태인 1차 권선을 통하여 하나, 혹은 그 이상의 절연된 급전 코일로 전송된다. 본 논문은 유도전력전송의 집전장치의 구조를 기존변압기와 유사한 등가회로의 파라미터로 구성하고, 공극 및 권선을 고려한 1차, 2차측 파라미터를 설정하여 1차측 급전 주파수의 변화에 따른 집전특성에 대하여 기술하였다.

가변 흡.배기시스템에 의한 과급디젤기관의 체적효율 향상에 관한 연구 (A Study on the Volumetric Efficiency Improvement by Variable Induction & Exhaust System in a Turbocharged Diesel Engine)

  • 강희영;고대권
    • 동력기계공학회지
    • /
    • 제12권1호
    • /
    • pp.13-19
    • /
    • 2008
  • In this study, a variable induction and exhaust system is applied to turbocharged diesel engine to improve the volumetric efficiency, especially, in a low and transient engine speed range where much of the pollutant matters are expelled out. The volumetric efficiency is known as one of the most important factor which affects significantly engine performance, fuel economy and further emission and noise level. As the torque increase with the engine speed up, the gas flow in an exhaust pipe become pulsating and then has an effect on boost up capacity of air charging into the cylinder and expelling capacity to atmosphere simultaneously. But at a low and idling speed, the pulsation effect was not so significant. Accordingly, resonator was employed to compensate their loss. The variable induction system consists of the secondary pipe, resonator, intercooler, and torque variance were examined with extended operating conditions. In the mean time, for interpretation and well understanding for the phenomena of wave action that arising during intake and exhaust process between turbocharger and variable intake system, the concept of the combined supercharging was introduced. Some of results are depicted which deal with a pressure history during valve events of induction process. Consequently, by the governing of these phase and amplitude of pulsating wave, it enables us to estimate and evaluate for the intake system performance and also, designing stage of the system layout.

  • PDF

반경방향 분사방식 프리스월 시스템의 프리스월 노즐과 리시버 홀의 상대적 위치에 따른 시스템 성능변화 (System Performance Variation for Relative Location of Pre-swirl Nozzles and Receiver Holes in Radial On-Board Injection Type Pre-swirl System)

  • 이종건;이현규;조건환;조진수
    • 한국항공우주학회지
    • /
    • 제48권1호
    • /
    • pp.43-53
    • /
    • 2020
  • 프리스월 노즐과 리시버 홀의 상대적 위치가 반경방향 분사방식 프리스월 시스템의 성능에 미치는 영향을 분석하였다. 본 연구에서는 5개의 프리스월 노즐 위치와 4개의 리시버 홀 위치 조합을 통해 20개의 설계점에 대한 분석을 진행하여 유량계수와 온도 강하 효율 변화 경향성을 연구하였다. 시스템 유량계수는 프리스월 노즐의 압력비와 비슷한 경향을 보였다. 캐비티 내부의 유동이 벽면의 영향을 크게 받을수록 시스템 성능 변화가 발생하였으며 회전면보다 정지면의 영향력이 더 큰 것을 확인하였다. 형상변수 변화에 따라 기준 설계점 대비 유량계수는 -1.39%~1.25%, 온도강하효율은 -5.41%~2.94% 변화하였다.

고기동 안정화 카메라 및 원격제어 셀프카메라를 적용한 캔위성 시스템 개발 (Development of A CanSat System Applying High Agility Camera and Remote Control Camera)

  • 김수현;박재현;김혜인;배기성;채봉건;오현웅
    • 항공우주시스템공학회지
    • /
    • 제12권3호
    • /
    • pp.86-96
    • /
    • 2018
  • 본 논문에서 제안한 캔위성은 2017년 캔위성 경연대회에 출전한 $HA+RC^2S$ CanSat (High Agility and Remote Control Camera System Can Satellite)이다. 주요임무는 수동진동감쇠기인 동흡진기를 사용하여 카메라를 회전시킨 직후에 발생하는 잔류진동을 감쇠하여 고품질의 영상획득이 가능한 고기동 안정화 카메라 시스템을 검증하는 것이다. 부가적으로는 지상국의 조이스틱을 사용하여 무선으로 제어되는 원격 제어 셀프카메라로 캔위성 자체의 이미지데이터를 획득하는 것이다. 본 논문에서는 임무 정의, 시스템 설계, 제작, 기능 및 성능시험, 최종 비행시험을 포함하는 $HA+RC^2S$ CanSat의 개발과정에 대해 서술하였다.

선택적다중이온질량분석기를 이용한 대기 중 휘발성유기화합물 실시간 동시분석법 개발 및 적용 (Development of Real-time and Simultaneous Quantification of Volatile Organic Compounds in Ambient with SIFT-MS (Selected Ion Flow Tube-Mass Spectrometry))

  • 손현동;안준건;하성용;김기범;임운혁
    • 한국대기환경학회지
    • /
    • 제34권3호
    • /
    • pp.393-405
    • /
    • 2018
  • Volatile organic compounds (VOCs) are representative air pollutants due to their detrimental effects on human health and their role in formation of secondary organic aerosols. Assessments and monitoring programs of VOCs using periodic grab sampling like Tedlar bags, canisters, and sorbent traps provide limited information, often with delay times of days or weeks. Selected ion flow tube mass spectrometry (SIFT-MS) is an emerging analytical technique for the real-time quantification of VOCs in air. It relies on chemical ionization of the VOCs molecules in air introduced into helium carrier gas using $H_3O^+$, $NO^+$, and $O_2{^+}$ precursor ions. Real-time monitoring method of 60 VOCs in the ambient air was developed using TO-15 standard gas mixture. Calibration curves, method detection limit, and quantitation reproducibility of the target compounds were tested. Dynamic dilution system was used to dilute standard gas from 0.174 ppbv to 100 ppbv, where calibration curves showed good linearity with $r^2$> 0.95 in all target analytes. Limit of detection (LOD) all compounds were sub ppbv, and some halogenated compounds showed pptv levels. Seven consecutive analyses of target compounds showed good repeatability with relative standard deviation of less than 10%. One day monitoring of VOCs in ambient air was conducted in Geoje. Average concentration of target VOCs in Geoje were relatively lower than other regions, among which formaldehyde showed the highest concentration ($15.4{\pm}5.78ppbv$). SIFT-MS provided good temporal resolution data (1 data per 3.2 minute), which can be used for identifying ephemeral short-term event. It is expected that SIFT-MS will be a versatile monitoring platform for VOCs in ambient air.

황사 에피소드 발생시 대기먼지의 농도 특성과 인체 영향 (Concentration Characteristics and Health Effect Assessment of Atmospheric Particulate Matters During Asian Dust Storm Episodes)

  • 강공언
    • 한국환경보건학회지
    • /
    • 제35권1호
    • /
    • pp.21-35
    • /
    • 2009
  • The Asian dust storms which originated in the deserts of Mongolia and China transported particles to Korea and led to a high concentration of atmospheric particulate matters (PM) of more than $1000{\mu}g/m^3$ throughout the country in the spring, of 2007. Public concern, in Korea, about the possible adverse effects of these dust events has increased, as these dust storms can contain various air pollutants emitted from heavily industrialized eastern China. The objectives of this study were to understand the concentration characteristics of PM as a function of particle size between the Asian dust storm episodes and non-Asian dust period and to consider the mass size distribution of PM in the Asian dust storms and their water soluble ion species on the potential, possible effects on deposition levels in the three regions (nasopharyngeal, tracheobronchial, and alveolar) of the human respiratory system. The size distribution of PM mass concentration during the Asian dust storms showed a peak in the coarse particle region due to the long-range transport of soil particles from the deserts of Mongolia and China, which was identified by HYSPLIT-4 model for backward trajectory analysis of air arriving in the sampling site of Iksan. During the non-Asian dust period, there were two different types in PM size distribution: bimodal distribution when low concentrations of $PM_{2.5}$ were observed, while unimodal distribution having a peak in fine particle region when high concentrations of $PM_{2.5}$ were showed. This unimodal distribution with high concentrations of fine particulate and secondary air pollutants such as ${SO_4}^{2-}$, ${NO_3}^-$, ${NH_4}^+$ was found to be due to the long-range transport of air pollutants from industrialized eastern China. During the Asian dust storms, the mean concentrations of PM that can be deposited in the nasopharyngeal, tracheobronchial, and alveolar region were $128.8{\mu}g/m^3$, $216.5{\mu}g/m^3$, and $89.6{\mu}g/m^3$, respectively. During the non-Asian dust period, the mean concentrations of PM that can be deposited in the nasopharyngeal, tracheobronchial, and alveolar region were $8.4{\mu}g/m^3$, $9.5{\mu}g/m^3$ and $38.5{\mu}g/m^3$, respectively.

스핀코팅법에 의한 리튬 2차전지용 산화물 양전극 LiCoO2 박막의 구조 및 전기화학적 특성에 대한 연구 (Structural and Electrochemical Properties of Spin Coated LiCoO2 Cathode Thin Film in Lithium Secondary Batteries)

  • 강성구;유기천
    • 대한화학회지
    • /
    • 제50권3호
    • /
    • pp.243-246
    • /
    • 2006
  • 박막은 Pt/Ti/SiO2/Si 기판 위에 구연산 졸을 이용하여 spin coating에 의해 제작하였다. 기판위에 코팅된 구연산 졸을 380oC에서 15분간 건조시킨 후 750oC에서 10분간 열처리하여 박막을 얻었다. 얻어진 박막은 X-선 회절분석 결과 R3m의 결정구조를 가짐을 알수 있었고, 전기화학적 특성의 측정결과 1차 방전용량은 0.35Ah/cm2-m로 측정되었다.

지역거점물류센터 입지선정에 관한 연구 : 아시아 지역 허브 공항을 중심으로 (Locational Preferences for Regional Distribution Center : Focused on Asian Hub Airports)

  • 송재길;방완혁;송상화
    • 산업경영시스템학회지
    • /
    • 제39권2호
    • /
    • pp.103-112
    • /
    • 2016
  • As supply chains are globalized, multinational companies are trying to optimize distribution networks using a hub and spoke structure. In this hub and spoke network structure, multinational companies locate regional distribution centers at hub airports, which serve demands in their corresponding regions. Especially when customers put higher priority on the service lead-time, hinterlands of international hub airports become ideal candidate locations for the regional hub distribution centers. By utilizing excellent airport and logistics services from hub airports, regional distribution centers in the hub airports can match supply with demand efficiently. In addition, regional hub distribution centers may increase air cargo volume of each airport, which is helpful in the current extremely competitive airport industry. In this paper, we classified locational preferences into three primary categories including demand, service and risk and applied the analytic hierarchy process methodology to prioritize factors of locational preferences. Primary preference factors include secondary factors. Demand factor contains access to current and prospect markets. Service factor comprises airport and logistics perspectives. Service factor in terms of airport operations includes secondary factors such as airport service and connectivity. Service factor in terms of logistics operations contains infrastructure and logistics operations efficiency. Risk factor consists of country and business risks. We also evaluated competitiveness of Asian hub airports in terms of candidate location for regional hub distribution centers. The candidate hub airports include Singapore, Hong Kong, Shanghai, Narita and Incheon. Based on the analytic hierarchy process analysis, we derived strategic implications for hub airports to attract multinational companies' regional hub distribution centers.

처리수 재이용을 위한 최종침전지 유출수의 급속여과공정 처리특성 (Treatment Characteristics of Rapid filtration Process treating Secondary Clarifier Effluent for Wastewater Reuse)

  • 한동우
    • 한국수자원학회논문집
    • /
    • 제35권2호
    • /
    • pp.213-220
    • /
    • 2002
  • 하수 처리수의 재이용을 위하여 표준활성슬러지법에 의한 생물학적 처리 후 최종침전지 유출수를 급속여과공정으로 처리하기 위한 Pilot Plant 실험연구가 수행되었다. 또한, 활성슬러지와 연계된 급속여과공정과 포기조 후단에 응집제를 주입하는 활성슬러지 이후 급속여과 처리하는 공정과의 비교 실험도 행해졌다. 최종침전지 유출수를 급속여과공정으로 처리한 경우 여과속도는 100m/day, 여과지속시간은 40시간 이하로 운전하는 것이 타당한 것으로 나타났으며, 여과지의 역세척 주기는 여과속도 100m/day일 때 40시간에 1회 정도가 되었다. 여과지 역세척 시 역세척 방법은 공세 1분, 공세+수세 30초, 수세 1분, 공세·수세 2분, 수세 3분, 안정 30초, 배수 10분의 순으로 행하는 것이 효과적이었으며, 수세속도는 10LPM으로 전체 여과수량의 2%정도였다. 표준활성슬러지 시스템에 의한 2차 처리수를 잡용수로 재이용 하기 위해서는 폭기조 후단에 응집제를 첨가하여 여과 공정을 후속공정으로 하는 시스템으로 유용하게 사용할 수 있을 것으로 판단된다.

A Study on the Enhancement of Inventories for Precursors (NOx, SOx) Released from Open Burning of Agricultural Waste Vinyl Causing the Secondary Generation of Particulate Matters

  • Kim, Tae-Han;Choi, Boo-Hun
    • 인간식물환경학회지
    • /
    • 제24권2호
    • /
    • pp.195-207
    • /
    • 2021
  • Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO2, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.