• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.545-554
• /
• 2021

According to the changes of the medical environment of the times, it is necessary to discuss the issues of the doctor's medical guidance and to conduct continuous research so that alternatives can be prepared systematically. Furthermore, in order to enhance the professionalism of radiological technologists and to develop the medical technician system, the new Radiological Technologist Independent Act has been established, which contains the overall contents of the scope of work, professional qualifications, and specialized education of radiological technologists, and provides quality medical services to patients through professional procedures and treatment. In order to increase the level of medical care, the purpose, definition, mission, role, and scope of work specified in the Medical Act, Medical Service Technologists, etc. Act, the Enforcement Decree, and the Enforcement Rules were variously analyzed and new directions were presented. First, the definition of a medical technician should use a generic term so that the factors of conflict and prejudice could be resolved. Second, change the doctor's guide to doctor's prescription; and then legislate the authority to sign and write medical records after examination by radiological technologists, thereby prohibiting unlicensed technicians that seriously endanger patient safety. Third, an accurate definition of radiological technologists' roles should be established; not only selection and management of radiological technologists' work but also procedures and treatment for each radiology field should be specified to suit the current medical system. Fourth, a professional radiological technologists' qualification system and a specialized education system should be established in order to secure human resources that could provide patients trust in procedures and treatment based on professional knowledge and experience in the field of radiology. Fifth, the Education and Evaluation Institute should be operated in Korea education system to educate the professional knowledge and competency for students. In addition, it is necessary to in-depth analysis of foreign cases could be applied to the medical system and education system in Korea; it could strive to nurture systematic human resources.

• 지능정보연구
• /
• 제17권4호
• /
• pp.227-240
• /
• 2011

특허의 중요성이 커짐에 따라 특허분석의 중요성 또한 점점 커지고 있다. 특허분석은 네트워크 기반 방법과 키워드 기반 방법으로 나눠지는데 네트워크 기반은 특허 내부에 존재하는 세부 기술정보에 대한 분석이 불가능하다는 단점이 있고 키워드 기반은 기술정보간의 상호관계를 규명하지 못한다는 단점이 있다. 기존에 제시된 네트워크 기반 특허 분석과 키워드 기반 분석의 한계를 극복하기 위해서 두 방법을 혼합한 방법으로서 본 연구에서는 특허 키워드 네트워크 기반 분석 방법론을 제시하였다. 본 연구에서는 LED 분야의 특허들을 대상으로 텍스트 마이닝을 통해 중요한 기술정보를 추출한 다음, 키워드 네트워크를 구축하고, 이를 대상으로 커뮤니티 네트워크 분석을 수행하였다. 분석 결과는 다음과 같다. 첫째, 특허 키워드 네트워크는 매우 낮은 밀도와 매우 높은 클러스터링 지수를 나타내었다. 밀도가 높다는 것은 LED 분야내 특허 키워드 네트워크 내 노드(키워드)들이 산발적으로 연결되어 있다는 것을 의미하며, 클러스터링 지수가 높다는 것은 해당 키워드 네트워크 내 노드, 즉 키워드들이 각각의 커뮤니티로 매우 긴밀하게 연결되어 있음을 나타낸다. 둘째, 특허 키워드 네트워크도 다른 지식네트워크와 마찬가지로 명확한 멱함수 분포를 따른다는 사실을 알 수 있었다. 이는 기존에 활발히 연구, 활용되어 많은 연결고리를 갖고 있는 특허개념(키워드)수록 지속적으로 다른 연구자들에 의해 선택되고 이 키워드를 바탕으로 새로운 키워드들이 연결되어서 이들 키워드간의 조합으로 새로운 기술이 발명된다는 것이다. 셋째, 특허가 개발될 때 특정 분야에 유입된 키워드 중 새로운 링크가 생긴 키워드의 대부분이 기존에 연결되어 있던 커뮤니티 내의 키워드들과 결합되어 새로운 특허 개념을 구성한다는 사실을 발견하였다. 이러한 사실은 단기(4년) 장기(10년) 두 기간 모두 동일하게 나타났다. 나아가 본 연구에서 제시한 방법론을 통해 도출된 특허 키워드 조합 정보를 활용하면 미래에 어떤 개념들이 합쳐져서 새로운 특허 단위로 만들어 질지 가늠해볼 수 있고, 새로운 특허를 개발할 때 참고할 수 있는 유용한 정보로 활용할 수 있다.

• 한국유기농업학회지
• /
• 제21권4호
• /
• pp.523-538
• /
• 2013

To help improve the current government practice of direct damage-compensation policies, resulting from the loss of profit, sustained by Hanwoo farmers, as a result of the recent Korea-U. S. Free Trade Agreement (FTA), this research aims to examine any problems or issues caused by said policies. To accomplish this task, we have established Hanwoo-SIMO model and estimated the damage of Hanwoo farmers, one without the implementation of the FTA and another with the FTA, to compare and contrast the two. We then analyzed the efficacy of the current government policies. According to our analysis, the current direct compensation policies for the loss of profit on the part of Hanwoo farmers are insufficient. To address this problem, we recommend the government enact a new direct damagecompensation law to address the following issues. First, as the base formula of damage-compensation, the government should use current price of the beef rather than the annually changing flexible price. Second, the flexible control index should remain fixed at 1.0 rate while the government prepares the adequate amount of the damage compensating direct payment resulting from the FTA. Third, the direct government compensation policy should extend beyond the current 15 years (2013-2026) as the profit loss is expected to increase after the midpoint of the FTA.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.319-330
• /
• 2020

This paper investigates the free vibrations of cylindrical shells made of time-dependent materials for different viscoelastic models under various boundary conditions. During the extraction of equations, the displacement field is estimated through the first-order shear deformation theory taking into account the transverse normal strain effect. The constitutive equations follow Hooke's Law, and the kinematic relations are linear. The assumption of axisymmetric is included in the problem. The governing equations of thick viscoelastic cylindrical shell are determined for Maxwell, Kelvin-Voigt and the first and second types of Zener's models based on Hamilton's principle. The motion equations involve four coupled partial differential equations and an analytical method based on the elementary theory of differential equations is used for its solution. Relying on the results, the natural frequencies and mode shapes of viscoelastic shells are identified. Conducting a parametric study, we examine the effects of geometric and mechanical properties and boundary conditions, as well as the effect of transverse normal strain on natural frequencies. The results in this paper are compared against the results obtained from the finite elements analysis. The results suggest that solutions achieved from the two methods are ideally consistent in a special range.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.105-111
• /
• 2020

The organic Rankine cycle (ORC) and the Kalina cycle system (KCS) are being considered as the most feasible and promising ways to recover the low-grade finite heat sources. This paper presents a comparative exergetical performance analysis for ORC and Kalina cycle using ammonia-water mixture as the working fluid for the recovery of low-grade heat. Effects of the system parameters such as working fluid selection, turbine inlet pressure, and mass fraction of ammonia on the exergetical performance are parametrically investigated. KCS gives lower lower exergy destruction ratio at evaporator and higher second-law efficiency than ORC. The maximum exergy efficiency of ORC is higher than KCS.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.98-107
• /
• 2017

This study is aimed to design for qualification structure and develop the subjects for examination of the school safety manager qualifications. For the study purpose, job analysis and meetings with experts were performed for extract contents such as task range, criteria of examination, subjects of examination and examination methods, etc. The first step, duties and tasks of the school safety manager were figured out through revised job analysis data of the school safety manager developed before. On the second step, job model was established and developed job specification including importance, difficulty and frequency of each task. On the third step, task specification was developed, and Knowledge-Skill Matrix was the most important thing on examination were completed. The fourth step was the selection of examination subject using task-subject matrix and 6 subjects such as The Principles of Safety, Understanding of the School Safety Manual, Law Related on the School Safety, Introduction to Education, Understanding and Dealing with Type of the School Safety, Establishment of the School Safety Plan were derived from previous procedure. The fifth step was development of guidelines for design examination of each subject. The last step was development for skills education program.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1639-1647
• /
• 2016

This paper deals with eddy current loss analysis of Slotless Double sided Cored type permanent magnet linear generator by using analytical method, space harmonic method. In order to calculate eddy current, this paper derives analytical solution by the Maxwell equation, magnetic vector potential, Faraday's law and a two-dimensional(2-D) cartesian coordinate system. First, we derived the armature reaction field distribution produced by armature wingding current. Second, by using derived armature reaction field solution, the analytical solution for eddy current density distribution are also obtained. Finally, the analytical solution for eddy current loss induced in permanent magnets(PMs) are derived by using equivalent, electrical resistance calculated from PMs volume and eddy current density distribution solution. The analytical result from space harmonic method are validated extensively by comparing with finite element method(FEM).

• 한국안전학회지
• /
• 제33권3호
• /
• pp.77-82
• /
• 2018

This paper aims to analyze the accident based on changing patterns of traffic culture index. For this purpose, this paper particularly focuses on classifying the traffic culture patterns and developing the traffic accidents using panel count data model. The main results are as follows. First, the traffic culture patterns are divided into 'increasing', 'decreasing' and 'other' patterns. The null hypotheses that the number of accident are the same over patterns are rejected. Second, 4 fixed effect negative binomial models which are all statistically significant are developed. Third, the regions with 'increasing' pattern are analyzed to be mostly the counties, and to demand the traffic law enforcement. Fourth, the regions with 'decreasing' pattern are evaluated to be mainly the districts and to require such the traffic culture as turn signal usage. Finally, the regions with 'other' pattern are analyzed to be mostly the cities and to ask for enhancing the level of traffic culture.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.298-309
• /
• 1990

In this paper, a new method is suggested to analyze impulsive stresses at loading poing of concentrated impact load under certain impact conditions determined by impact velocity, stiffness of plate and mass of impact body, etc. The impulsive stresses are analyzed by using the three dimensional dynamic theory of elasticity so as to analytically clarify the generation phenomenon of cone crack at the impact fracture of fragile materials (to be discussed if the second paper). The Lagrange's plate theory and Hertz's law of contact theory are used for the analysis of impact load, and the approximate equation of impact load is suggested to analyze the impulsive stresses at the impact point to decide the ranage of impact load factor. When impact load factors are over and under 0.263, approximate equations are suggested to be F(t)=Aexp(-Bt)sinCt and F(t)=Aexp(-bt) {1-exp(Ct)} respectively. Also, the inverse Laplace transformation is done by using the F.F.T.(fast fourier transform) algorithm. And in order to clarity the validity of stress analysis method, experiments on strain fluctuation at impact point are performed on a supported square glass plate. Finally, these analytical results are shown to be in close agreement with experimental results.

• 한국중재학회지:중재연구
• /
• 제16권2호
• /
• pp.183-211
• /
• 2006

DDA and FTA make global business environments more competitive. These environments require Korean firms to face an unlimited competition and to resolve their dispute by ADR(Alternative Dispute Resolution). Thus, Korean Companies should be more concerned with ADR system and should utilize ADR to settle their dispute effectively and efficiently. However, ADR and KCAB isn't well recognized in Korea. So, the major purposes of this study are to expand the recognition of ADR and KCAB through SWOT Analysis of KCAB in Korea. Based on the results of my study, I suggest KCAB the following guidelines. First, KCAB work closely with the concerned research association as KSSA to make a guideline books of efficient dispute resolution. Second, KCAB improves their service quality and tries to utilizes various opportunity factors well. Meanwhile, Korean government assists KCAB with funds as well as improvement of dispute resolution system as the establishment of ADR Law. Consequently, to expand ADR in Korea, revolution of KCAB Staffs' consciousness and Korean government's assistance are very needed.