• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.83-87
• /
• 1995

Impact-bouncing height of steel balls dropped from 1m height on various floor materials were measured to evaluate impact-bouncing characteristics depending on floor materials and the effect of these properties on walkability and fatigue of humanbody. Stone and tile finished concrete floor showed the highest bouncing height of around 70%, and soil showed the lowest bouncing height of around 3%. The second highest bouncing height was about 40% which corresponded to terazo finished concrete floor and about twice as high as the bouncing height on concrete floor without finishing. The impact-bouncing height could be lowered to 15~20% by using gum tile on concrete floor. Steel showed similar bouncing height to concrete floor, and wood-based materials showed the second lowest bouncing height next to soil. Among wood-based materials, hardwood species having higher specific gravities showed relatively high bouncing height of 8~24%, softwood species having low specific gravities showed relatively lower bouncing height of 5~18%, and wood composites showed bouncing height of 8~18%. Among all the materials used in this study, wood-based floor materials corresponded to the bouncing height of 10~15% which is considered to be best for humanbody. Surface painting on wood-based materials increased the bouncing height, and the number of bouncing of steel balls after dropping from 1m height increased as the bouncing height increased.

• 한국프랜차이즈경영연구
• /
• 제14권4호
• /
• pp.17-33
• /
• 2023

Purpose: This study divides choice attributes that can help strengthen the competitiveness of traditional markets into product, price, personnel, and physical evidence. This study also examines which choice attributes affect customer value perception, satisfaction, and loyalty. Research design, data, and methodology: The data were collected from 542 traditional customers aged 20 or older who frequently visit traditional markets across the country and analyzed using the Smart PLS 4.0 program. The survey was conducted with the help of an online survey company for a total of 14 days from April 7, 2023 to April 20, 2023. Result: First, product, price, and employee quality have a positive impact on utilitarian and hedonic value, but physical evidence does not. Second, product, price, and employee quality have a positive impact on hedonic and hedonic value. Second, utilitarian value has a positive impact on satisfaction and revisit intention. Third, hedonic value has a positive impact on satisfaction, but does not on revisit intention. Lastly, satisfaction has a positive impact on revisit intention. Conclusions: Based on the S-O-R model and the theory of consumption value, this study proposed and examined an integrated framework in which satisfaction leads to revisit intention through selection attributes acting on perceived value.

• Perspectives in Nursing Science
• /
• 제13권1호
• /
• pp.1-9
• /
• 2016

Purpose: The purpose of this study was to identify the current state of research on healthcare professionals who make medical errors, who are known as "second victims", and support systems for them. Methods: An extensive search was conducted in electronic databases, Google, and websites related to patient safety using search terms such as "second victims", "medical errors", "adverse events", and "sentinel events". Results: Research to date in Korea has rarely focused on healthcare professionals' experiences after making medical errors. Abroad, there are comprehensive and systematic reviews of the impact of medical errors on healthcare professionals, their coping responses, and support systems for these second victims. Additionally, several institutes related to patient safety provide official guidelines and accessible support systems to support second victims in the aftermath of medical errors, especially serious adverse events. Conclusion: The impact of medical errors on healthcare professionals is profound and complex. Although systematic support systems for second victims are imperative, this has been overlooked in Korea. Thus, more research about the experiences of healthcare professionals after medical errors needs to be conducted prior to developing support systems or programs. Additionally, further efforts are required to raise awareness of the necessity of supporting healthcare professionals in healthcare systems.

• 환경영향평가
• /
• 제4권3호
• /
• pp.63-71
• /
• 1995

This study analyzes the problems of environmental laws, development planning laws, Metropolitan Area Development Planning (MADP), and the level of environmental pollution at Asan-bay metropolitan area, where MADP will be realized in the near future. In order to prevent environmental pollution by the implementation of MADP, the Environmental Impact Assessment (EIA) Act and EIA systems in Korea should be revised so as to reflect the followings. First, the impact of national landuse planning changes on the environment should be considered at the beginning of the EIA procedures. Second, the overlapping and greater impact of many projects upon surrounding metropolitan areas should be simultaneously evaluated, though each project is the subject of EIA, and the environmental pollution protection and abatement alternatives must be made in accordance with the above impact of the projects. Thirdly, total effluent regulation of water pollution, air pollution and solid wastes should be enforced based on the self-purification of the metropolitan area environment.

• 오토저널
• /
• 제15권3호
• /
• pp.111-119
• /
• 1993

In this study, the transient impact structural stress analysis of tracked vehicle structures under recoil impact load is investigated. ANSYS, ABAQUS Code are used for modelling and analytical procedures. The highest maximum Tresca stress occurs on race ring portion and its stress level is (.sigma.$_{T}$)$_{max}$ =20-40kgf/m $m^{2}$. The second highest stress occurs on upper plate of chassis and down plate of turret. The maximum stress level increases with loading direction and elevation angle. The results from liner static load analysis are very much different with impact analysis. Therefore, the practical solutions of structures under impact load can be obtained by only nonlinear transient impact analysis. The impact stress analysis of the steel vehicle structures is conducted. The maximum stress level is less than (.sigma.$_T/)$_{max}$m $m^{2}$. So, the design concept of steel structures can be adapted for new alternatives.s.s.s..s.

• 자동차안전학회지
• /
• 제8권3호
• /
• pp.5-9
• /
• 2016

The objective of this study was to find the factors affecting the results of full frontal barrier impact test for the NCAP (New Car Assessment Program). To find the factors, the frontal NCAP test results of the NHTSA (National Highway Traffic Safety Administration) were utilized. The three tested vehicle were same model year. It was observed the second peak value of barrier force affected the occupant injury risk. As the second peak value of the barrier force increases, the injury risk of the driver side occupant increases as well.

• 환경영향평가
• /
• 제2권1호
• /
• pp.21-29
• /
• 1993

We live in an age of information and an era of rising environmental awareness. As a result, efficient and judicious use of environmental information has become a prerequisite to planning and management of environmental affairs in contemporary societies. So, we have embarked on a study of Environmental Information System(EIS). In the first article, we discussed the status analysis of EIS in Korea, USA, and Japan. This study as the second project has three major components. First, it classifies items and sources of 22 EIA factors. Second, it explains building of environmental information comprising geographic and attribute data of 17 factors. Finally, the study presents applications of EIS as an alternative assessment of suitability analysis. Based on these analysis, the study makes some recommendations and conclusions.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.159-166
• /
• 2019

Due to the various engagement situations, it is very difficult to generate the optimal trajectory with several constraints. This paper investigates the sequential convex programming for the impact angle control with the additional constraint of altitude limit. Recently, the SOCP(Second-Order Cone Programming), which is one area of the convex optimization, is widely used to solve variable optimal problems because it is robust to initial values, and resolves problems quickly and reliably. The trajectory optimization problem is reconstructed as convex optimization problem using appropriate linearization and discretization. Finally, simulation results are compared with analytic result and nonlinear optimization result for verification.

• Journal of Information Technology Applications and Management
• /
• 제19권4호
• /
• pp.213-225
• /
• 2012

The identified research result can be outlined more specifically as follows: first, informativeness of SNS was giving positive impact to some degree on the user satisfaction; second, connectivity of SNS was giving very positive impact on the user satisfaction; third, accessibility was giving very positive impact on the user satisfaction; forth, usability of SNS was giving very positive impact on the user satisfaction; fifth, amusement of SNS was giving very positive impact on the user satisfaction; the satisfaction level of SNS users gave positive impact on the further intention of SNS users. It was identified, however, that interactiveness of SNS was the factor that did not give much impact on the user satisfaction. This result comes from the analysis that SNS is convenient to actively explore and get further information that users wish to find, while they are insufficient in function to provide the information other users require or exchange information among users through the SNS.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.298-309
• /
• 1990

In this paper, a new method is suggested to analyze impulsive stresses at loading poing of concentrated impact load under certain impact conditions determined by impact velocity, stiffness of plate and mass of impact body, etc. The impulsive stresses are analyzed by using the three dimensional dynamic theory of elasticity so as to analytically clarify the generation phenomenon of cone crack at the impact fracture of fragile materials (to be discussed if the second paper). The Lagrange's plate theory and Hertz's law of contact theory are used for the analysis of impact load, and the approximate equation of impact load is suggested to analyze the impulsive stresses at the impact point to decide the ranage of impact load factor. When impact load factors are over and under 0.263, approximate equations are suggested to be F(t)=Aexp(-Bt)sinCt and F(t)=Aexp(-bt) {1-exp(Ct)} respectively. Also, the inverse Laplace transformation is done by using the F.F.T.(fast fourier transform) algorithm. And in order to clarity the validity of stress analysis method, experiments on strain fluctuation at impact point are performed on a supported square glass plate. Finally, these analytical results are shown to be in close agreement with experimental results.