• The Korean Journal of Emergency Medical Services
• /
• v.9 no.2
• /
• pp.111-128
• /
• 2005

Background: Cardiac arrest is one of the most critical diseases which can likely lead to severe cerebral disability or brain death when the cases can not recover their circulation within 10 minutes. Saving out-of-hospital cardiac arrest cases is a recent concern in Korea. Resuscitation has become an important multidisciplinary branch of medicine, demanding a spectrum of skills and attracting a plethora of specialities and organizations. The best survival can be achieved if all the following links have been optimized : rapid access, and early CPR, defibrillation and ACLS, Since the "Utstein Style" was advocated in 1991, many reports about out-of-hospital cardiac arrest have been published based on this guideline. These differences prevent valid inter-hospital and international comparisons. However, it is not known how effective resuscitation has become to the patients. In other words, there are no guidelines for reviewing, reporting, and conducting research on resuscitation in Korea. This dissertation aims to provide the basic data for a unified reporting guideline of resuscitation in Korea and evaluating the out-of-hospital factors associated with survival discharge of out-of-hospital cardiac arrest. Methods: As for this study, uses the collected data about Out-of-hospital cardiac arrests at 4 area, from January, 2005 to April. 2005. With a retrospective study, 174 cases were analyzed. The data was recorded based on the Out-of-Hospital Utstein Style. Results: Resuscitation was performed on 174 out-of-hospital cardiac arrest cases at the 4 area 14 patients(8.1%) recovered their spontaneous circulation. Overall, the ROSC of the out-of-hospital cardiac arrest patients was 8.1%, which was poorer than that of western countries. Gender distribution was 50 females(28.7%) and 124 males(71.3%), approximately twice as many males as females. ROSC of witnessed arrests was found out to be 97.7%. The ratio of the witnessed arrest groups showed higher results than that of unwitnessed arrest groups in the above-examined cases. Cardiac etiology consisted of cardiac(33.5%), non-cardiac(45.7%), trauma(20.1%), and unknown(6.0%). Cardiac was the best performance. Initial rhythm showed Ventricular Tachycardia/pulseless Ventricular Fibrillation in 8 patients(6.0%), asystole in 100(75.2%) and unknown in 25(18.8%). The results of the Ventricular Tachycardia/pulseless Ventricular Fibrillation showed higher results than the others cases, The proportion of the cardiogenic cause was 33.5%, which was only half of western countries. Ventricular Tachycardia/pulseless Ventricular Fibrillation is relatively rare. These differences were due to the prevalent pattern of Out-of-hospital cardiac arrest as well as prematurity of the EMSS. Bystander CPR was practiced on 13 patients(7.52%). ROSC was shown in 46.2% cases. CPR by EMT was carried out on 167 cases(96.5%). ACLS by EMf was rare. From collapse, 4 cases(2.6%) arrived to ED within 6 minutes. 13 (8.6%) within 10 minutes, and 49(32.5%) over 31 minutes. The sooner the patients arrived, the greater the ratio of ROSC and discharged alive became, and the same with collapse time to ROSC. As the results of the logistic regression analysis, ROSC was found out to be highly influenced by the time of ED arrival from collapse and Ventricular Tachycardia/pulseless Ventricular Fibrillation. Therefore, the ratio of ROSC depends on not any single factor but various intervention factors. Conclusion: This dissertation presents the following suggestions and directions of the study hereafter. First, the first step for a chain of survival should be taken to activate EMSS early with a phone as soon as cardiac arrests are witnessed. Second, it is keenly needed that emergency medical technicians should be increased through emergency education for living. Third, it is necessary to establish the emergency transportation system. Fourth, most of the Koreans have little understanding of EMT and the present operation systems have many problems, which should be fundamentally changed. Fifth, it is required to have an active medical control over Out-of-hospital CPR, And proper psychological supports should be given not only to patients themselves and their family but also individuals who are engaged in emergency situation. Finally, through studies hereafter on nationwide, comprehensive, and standard forms, it is needed to examine into the biological figures of human body, causes and trends of cardiac arrests, and then, to enhance the survival rate of Out-of-hospital cardiac arrests. Korean guidelines for Cardiopulmonary resuscitation need to be made.

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.123-133
• /
• 2007

Z-axis automatic tube current modulation technique automatically adjusts tube current based on size of body region scanned. The purpose of the current study was to compare noise, and radiation dose of multi-detector row CT (MDCT) of lower extremity performed with Z-axis modulation technique of automatic tube current modulation with manual selection fixed tube current. Fifty consecutive underwent MDCT venography of lower extremity with use of a MDCT scanner fixed tube current and Z-axis automatic tube current modulation technique (10, 11 and 12 HU noise index, $70{\sim}450\;mA$). Scanning parameters included 120 kVp, 0.5 second gantry rotation time, 1.35:1 beam pitch, and 1 mm reconstructed section thickness. For each subject, images obtained with Z-axis modulation were compared with previous images obtained with fixed tube current (200, 250, 300 mA) and with other parameters identical. Images were compared for noise at five levels: iliac, femoral, popliteal, tibial, and peroneal vein of lower extremity. Tube current and gantry rotation time used for acquisitions at these levels were recorded. All CT examinations of study and control groups were diagnostically acceptable, though objective noise was significantly more with Z-axis automatic tube current modulation. Compared with fixed tube current, 2-axis modulation resulted in reduction of CTDIvol (range, $-6.5%{\sim}-35.6%$) and DLP (range, $-0.2%{\sim}-20.2%$). Compared with manually selected fixed tube current, 2-axis automatic tube current modulation resulted in reduced radiation dose at MDCT of lower extremity venography.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5011-5017
• /
• 2012

Background: Overexposure to sunlight in childhood and the adolescent period and associsated sunburns significantly increase the risk of skin cancer in adulthood. In Turkey, the incidence of skin cancer in the general population is 0.8%. The incidence is 0.6% and the mortality rate is 0.4% for men, while these rates are 1.0% and 0.7%, respectively, for women. If skin cancer is found early, its treatment is facilitated. Therefore, personal skin examination is important for early diagnosis. Objectives: Our aim was to determine the effects of training for raising consciousness among adolescents to protect against skin cancer by influencing skin self examination behavior. Method: This quasi experimental intervention study was conducted between February and April 2012 in Izmir. The study population consisted of students attending $6^{th}$, $7^{th}$ and $8^{th}$ classes of a primary school (n:302). No sampling was performed. Data were collected with a form developed by the researchers based on the literature. The first part of form is aimed to determine demographic characteristics of adolescents (3 questions) and their risk status of skin cancer (6 questions). The second part was prepared for skin cancer risks of adolescents (8 questions) and indications of skin cancer (12 questions). The last part was intended to determine their knowledge about skin self examination (4 questions) and behavioral stages of skin self examination (1 question). Data collection was achieved with a questionnaire form in three phases. In the 1st phase, data about demographic characteristics of students, risk status of skin cancer, knowledge level of skin cancer and behavior stages were collected. In the $2^{nd}$ phase, skin self examination training based on the transtheoretical model was performed within the same day just after obtaining preliminary data. In the $3^{rd}$ phase, adolescents were followed up three times to establish the efficacy of the training (on the $15^{th}$ day after training program and at end of the $1^{st}$ and $2^{nd}$ months). Follow-up data were evaluated by questioning skin self examination performing behavior stages through electronic mail. Results: Half of the adolescents (50.5%) are male, and 58.4% of them are 13 years old with a mean age of $12{\pm}1.15$ years. About 29.4% of adolescents had brown hair color, 37.9% had brown/hazel eye color, 29.4% had white skin, and 47.2% had fewer than 10 moles in their body. The pretest mean score on knowledge level about risks of skin cancer was found to be $4.19{\pm}1.96$, while the post-test mean score was $6.79{\pm}1.67$ (min:0, max:8).The pretest mean score about indications of skin cancer was $7.45{\pm}3.76$, while the post-test mean score was $10.7{\pm}2.60$ (min:0, max:12). The increases were statistically significant (p<0.05). The behavior "I do not perform skin self examination regularly in every month and I do not think to perform it in the next 6 months" was reduced from 52.8 to 35.5% after training. Conclusion: The training program organized to raise consciousness among adolescents for protection against skin cancer increased the knowledge level about risks and indications of skin cancer and it also improved the behavior of performing skin self examination.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.117-142
• /
• 1997

This study is on perfume case that is one of a great number of ornaments which was designed by out ancestors. We had developed the tradition and the history of perfume case bag fan-weight etc. These have the same function as the present perfume. case. There were basket-shaped perfume cases which were the smellest one among the personal girdle ornaments in the silla era. The various patterned perfume case were made of gold metal coral platinum or green jadeite etc. In the single-crop trinkets a embroidered perfume bag with the gold and silver thread whose forms perfectly match their functions appeared during the Yi Dynasty. There was also a perfume bag which was one of the daily necessities. A precious "jul perfume" was carried by noble women. A fan-weight perfume bag was attached to the fan to emphasize the intrinsic beauty of utility and function. It is necessary to know the function of prefume case. As perfume case is weared on the clothes it was given more decorative effects as well as the function of medicinal amulet with a sweet smell. Therefore it is very important for us to study perfume case that has various function as an ornament. So The purpose of this study is to investigate the practical and decorative side of perfume case with the general examines of perfume finding how to practice use through our life. The results were as follows; 1. The first use of perfume is perfume through smoke which is for ceremony of religion It removes human body odor by degrees and spreads a sweet odor. Also the materials for making perfume of early age is aromatic plants which will be used flour-made flowers stems. As the materials for making perfume use is increasing today we can invent alcohol perfume today 2. Our country the custom of perfume-used is wide. Among them men's perfume-used was very special phenomenon. For example men were wearing perfume bag in the Silla era. Because perfume represented wealth and noble in those days. They shew off social position personality through perfume-used. 3. One of early religion ceremony article there was the perfume. And perfume case was means for containing perfume. Gradually the perfume case was used widly as increasing needs of perfume in human life. 4. In the middle period of 'Koryo' Dynasty perfume cases had a close relationship with clothes but after Mongolian has been attacked 'Koryo' there were changes in wearing clothes therefore the position of perfume cases were transfered to coat string that was the origin of decoration style that they began. That is to say the perfume case has been influenced the position of perfume case shapes with changing of fashion. 5. The perfume case has been made manifest various function as an ornament. In the practical side First medical-perfume in perfume case has been played an important role in first-aid medicine in critical condition. Second it was amulet for self protection. That is the shape pattern color materials perfume of the perfume case was represented the amuletive nature. Third it was used as substitute article of perfume. Modern women use liquid-perfume as our ancestors used perfume case bag or jul perfume As started above. Also In the decorative side the perfume case has a beautiful formative arts by itself as well as a close relationship with clothes. That well as a close relationship with clothes. That is when the perfume case is worn on the clothes costume is showed aesthetices. That is the materials shapes color pattern of the perfume case we can see the visual beauty also the materials colors embroidered pattern knots tassel that are used the perfume case are increased the decorative beauty of costume. Sixth the symbol in pattern of the pattern case is shown ancetor's wealth and rank health longevity immortality many-born-boy in those days. Today the perfume case is not used with changing of costume by degrees, Accordingly I hope that the result of this study is an influened in devlopment of the perfume case design with matching the modern fashion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.402-408
• /
• 2010

In the twenty first century, people experience a lot of stresses by psychological, social and environmental impetus. If the stress is excessive, it can become a problem and finally lead to diseases. Foot bath makes the body warm starting with the feet, controls the blood circulations and autonomic nervous systems. This study aims at examining the effects of stress and fatigue of senior students preparing for college entrance examination by foot bath with the aroma essential oil and the fermentation extracts. The experimental period was from March 30 to April 18, 2009. The study objects were 21 senior students of C Girls' High School in Cheonan. They were divided into 3 groups and treated 20 times. The first group was a foot bath group with Artemisia Herbal fermentation extracts. The second group was a foot bath group with the blending aroma essential oil of grapefruit, cypress and cedarwood. The third group was not treated. In the case of difference of physical and psychological stress, there was a reduction of 18.43 and 16.71 for the fermented extract group and 10.71 and 9.43 for the aroma group, while a reduction of 0.43 and 0.29 for the control group, respectively. This shows that foot baths using fermented extracts and aroma had lower physical stress compared to the control group (p<.01). For the difference of fatigue, there was a reduction of 19.14 for the fermented extract group, 11.57 for the aroma group and 0.07 for the control group, showing that foot baths accompanied by fermented extracts and aroma used in this study having lower fatigue compared to the control group (p<.01). The fermented extract group (M=55.71) had the highest level of satisfaction after foot baths, followed by the aroma group (M=49.14) and the control group (M=33.29). Duncan's post hoc test showed that there was a statistically considerable difference between the tests groups and control groups (p<.01). Through the results of this study, it was found that foot baths using bathing supplements were very effective for reducing stress and fatigue.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1510-1516
• /
• 2015

The objective of this study was to investigate the quality and sensory characteristics of sweet persimmon mashes and spirits fermented by three different yeasts [Saccharomyces species, labeled as LB (Lalvin BM $4{\times}4$), LD (Lalvin DV10), and UC (Uvaferm CM)]. In the production of sweet persimmon wines, UC had the highest alcohol content of 10.20% (v/v) after 9 days of fermentation (P<0.05). The range of pH after fermentation was 3.63~3.75. The total aerobic bacteria and yeast contents increased until day 3 and then continuously decreased to approximately 8.60 log CFU/mL and 8.20 log CFU/mL, respectively. Reducing sugar contents were 3.37% in UC, 3.91% in LD, and 4.05% in LB after fermentation. Total sugar contents were 4.89% in UC, 6.24% in LD, and 5.47% in LB after fermentation. Two-stage single-pot distillation was conducted to produce sweet persimmon spirits. While conducting second distillation, spirits were collected every 100 mL fraction. The alcohol contents gradually decreased as more fractions were collected. The amounts of acetaldehyde were 226 mg/L for LD, 225 mg/L for LB, and 310 mg/L for UC in the first fraction. LD produced the highest volume (677.8 mL) of alcohol in its body part in comparison with LB (408.0 mL) and UC (445.4 mL). In the descriptive analysis, UC had stronger intensities of sweet aroma, sour aroma and taste, and persimmon flavor (P<0.05). Persimmon characteristics seemed to be well characterized by UC. In conclusion, LD was the most efficient in terms of production cost, whereas UC would be used to produce a more flavorful sweet persimmon spirit.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.285-320
• /
• 2016

Cartoons and Animation are convergent arts created with a composite application of language arts described in the form of literary texts and sounds, plastic arts visualized in the form of artistic paintings, and film arts produced in the form of moving pictures. An academic university major in cartoons and animation studies established in late 20th century however, did not satisfactorily meet the needs in academic research and development and the free expression of artistic creation was limited. In order to systematize the major in cartoons and animation studies, an convergent approach to establish and clarify following are in demand : the terms and definitions, the historical developments, the research areas and methods, the major education and related jobs and start-ups. New culture and arts industries including cartoons, animation, moving images, and games contents are not yet listed in the industries listing service jointly provided online by the portal site Naver.com and Hyung-Seol publishing company. Above all, cartoons and animation are inseparably related to each other that even if one uses the term separately and independently, the meaning may not be complete. So a new combined term "Animatoon" can be established for the major in cartoons and animation studies and also used for its degree with concentrations of cartoons, animation, moving images, games, and etc. In the Introduction, a new combined term Animatoon is defined and explained the use of this term as the name of the major and degree in cartoons and animation studies. In the body, first, the Historical Developments classified Animatoon in the ancient times, the medieval times, and the modern times and they are analyzed with the help of esthetics and arts using examples of mural frescos, animal painting, religion cartoons, caricatures, cartoons, satire cartoons, comics, animation, 2 or 3 dimensional webtoons, and K-toons. Second, the Research Areas of Animatoon reviewed the theories, genres, artworks, and artists and the Research Methods of Animatoon presented the curriculum that integrated the courses in humanities, science technologies, culture and arts, and etc. Third, the Major Education considered Animatoon education in children, young adults, students of the major and the Related Jobs and Start-Ups explored various jobs relating to personal creation of artwork and collective production of business-oriented artwork. In the Conclusion, the current challenges of Animatoon considered personalization of the artists, specialization of the contents, diversification of the types, and liberalization of the art creation. And the direction of improvement advocated Animatoon to be an academic field of study, to be an art, to be a culture, and to be an industry. The importance of cartoons and animation along with videos and games rose in the 21st century. In order for cartoons and animation to take a leading role, make efforts in studying Animatoon academically and also in developing Animatoon as good contents in the cultural industries.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.355-366
• /
• 2007

The human's emotion has been used as a key factor in the design area and a marketing technique in a company. Therefore, a company is very interesting in human' emotional factor for the marketing and the design development recently. There have been very few studies carried out on enhancing how to use the emotional design and the emotional marketing in the kitchenware industry. Besides, almost all of the research works, which attempted to encourage how to use emotional factor for the design and the marketing, was carried out in the theory research level rather than a practical research. This research has been conducted both a qualitative research and a quantitative research in the field. The research methods were as follows; first, this research studied what is the emotional design and the emotional marketing through the previous literature research works. second, the researchers set up the hypothesis and research aims through the previous empirical research works from the researchers who are doing this research. Third, as the main body of this research, this research was conducted through the analysis of companies' data, the data come from the interviews by managers, and the data from questionnaire by the users. The results was produced after analyses of the above all the data. As a results, this research has introduced the successful case study which used the emotional design concept and the emotional marketing as a strategic level in the kitchenware industry. This research results would be able to help some one who wants to use the emotional design as a strategic level in order to increase their market share.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.651-660
• /
• 2016

Due to recent population aging, the number of check-up for senior citizens has increased steadily. According to this trend, the market size of dental X-ray equipment and the number of approval and review for these devices have simultaneously increased. The technical document of medical device is required for approval and review for medical device, and medical device companies needs to have work comprehension and expertise, as the document needs to include the overall contents such as performances, test criteria, etc.. Yet, since most of domestic manufacturers or importers of medical devices are small businesses, it is difficult for them to recruit professional manpower for approval of medical devices, and submission of inaccurate technical documents has increased. These problems lead to delay of the approval process and to difficulties in quick entering into the market. Especially, the Ministry of Food and Drug safety (MFDS) standards of a dental extra-oral X-ray equipment, a dental intra-oral X-ray equipment, an arm-type computed tomography, and a portable X-ray system have been recently enacted or not. this guideline of dental X-ray equipment adjusting revised standards was developed to help relative companies and reviewers. For this study, first, the methods to write technical document have been reviewed with revised international and domestic regulations and system. Second, the domestic and foreign market status of each item has been surveyed and analyzed. Third, the contents of technical documents already approved by MFDS have been analyzed to select the correct example, test items, criteria, and methods. Finally, the guideline has been developed based on international and domestic regulation, through close review of a consultative body composed of academic, industrial, research institute and government experts.