• 제목/요약/키워드: SecM

검색결과 2,519건 처리시간 0.031초

인공함양 주입량-양수량 평가를 위한 수리지질특성 민감도 분석 (Sensitivity analysis of hydrogeologic characteristics for recharge and discharge rates assessment in the artificial recharge site)

  • 강동환;소윤환;박호선;김병우
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.387-387
    • /
    • 2017
  • 인공함양 시설을 설계 및 운영하는 단계에서 설치 예정부지의 자연적 특성(지형, 지질, 기후 등)과 인공적 특성(주입정과 양수정의 거리, 주입량, 양수량 등)은 중요한 인자라고 볼 수 있다. 인공함양 예정 부지의 개념모델을 설정하고 수리전도도와 이격거리(주입정과 양수정의 직선거리)에 대한 민감도 분석을 수행하였다. 인공함양 예정 부지는 충적대수층이며, 인공함양 주입량과 양수량은 $150m^3/day$로 동일하게 설정하였다. HydroGeoSphere 모델링을 통한 민감도 분석은 수리전도도($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$)와 이격거리(10 m, 50 m, 100 m) 조건에 대해 총 12회 수행하였다. 수리전도도가 $10^{-1}cm/sec$$10^{-2}cm/sec$인 경우의 모델링 결과, 이격거리가 100 m 범위 이내에서는 지하수위 변동이 발생하지 않았다. 수리전도도가 $10^{-3}cm/sec$인 경우의 모델링 결과, 이격거리가 10 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 14 m 정도로 나타났고, 이격거리가 50 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 31 m 정도로 나타났고, 이격거리가 100 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 34 m 정도로 나타났다. 수리전도도가 $10^{-4}cm/sec$인 경우의 모델링 결과, 이격거리가 증가할수록 양수에 의한 수위하강과 영향반경이 증가하였으며, 낮은 수리전도도로 인해 양수로 인한 수두손실을 회복할 수 없었기에 양수정 주변에서 반경 수십 m 이상의 수두하강 영역을 형성하고 주입정 근처에서는 주입속도가 대수층의 투수능력에 비해 상당히 높기 때문에 5 m 정도의 수위상승이 나타났다. 모델링 결과를 분석하여, 수리전도도가 $10^{-3}cm/sec$ 이하이고 이격거리가 10 m 범위 이상인 충적대수층에 $150m^3/day$를 주입하면서 동시에 $150m^3/day$를 양수하는 시스템에서는 지하수위변동이 발생하므로 주입량과 양수량의 조절이 필요하다는 것을 확인하였다.

  • PDF

개에서 뒤쪽 경골신경자극에 의한 Somatosensory Evoked Potentials(SEPs)의 측정 (Determination of Somatosensory Evoked Potentials(SEPs) by Posterior Tibial Nerve Stimulation in Dogs)

  • 이주명;권오경;남치주
    • 한국임상수의학회지
    • /
    • 제17권2호
    • /
    • pp.388-394
    • /
    • 2000
  • 이 실험은 소형견종에 대한 정상 SEPs의 범위를 알아내기 위해 실시되었다. 임상증 상이 정상인 28두를 대상으로 자극점에서 channel 1 까지의 Pl(LPI), channel 1까지의 Nl (LN1), 자극점에서 channel 2가지의 Pl(TP1), channel 2까지의 N1(TNI)의 절대잠복기와 LP1-TN1` 의 파간잠복기를 알아내기 위해서 실시하였다. 이번 실험에서 LPI, LNI, TPI, TNI의 절대잠복기 (absolute latency)의 평균값은 2.69$\pm$0.31 msec, 4.91$\pm$0.49m/sec, 4.64$\pm$0.39 msec, 5.21$\pm$0.42 msec 띠었다. LP1과 TN1 사이의 파간절대잠복기의 핑균값은 2.52$\pm$7.19 msec 이었다. 측정 치들을 속도로 변환하였을 경우 다음과 같았다. 측, LPI, LNI. Tfl, TNI 그리고 LP1-TN1 에서의 속도의 평균값은 각각 93.11$\pm$ 8.58 m/sec, 50.99$\pm$ 5.36m/sec. 80.18$\pm$ sec, 71.31$\pm$4.79m/sec그리고 49.50$\pm$3.58m/sec 이었고. 71.66m/sec, 37.79m/sec, 65.75m/ sec, 59.33 m/sec, 40.55m/sec 의 최저속도를 초과하였을 때 정상범위로 간주하였다. LPI, LNI, TPI,TN1까지의 절대잠복기와 자극전극에 시 측정전극가지의 거리 사이에는 상관관계가 있었다 LP1, LN1, TP1, TN1의 상관계수는 각각 0.621, 0.494. 0.577,0.618 이었다 요추에서 기록된 SEPs갈은 LP1의 상관계수가 LN1 보다 높았으며 흉추에서 기록된 SEPs값은 TN1의 상관계수가 TP1보다 높았다. LP1과 TN1의 파간잠복기와 channel 1과 2의 거리차이와의 상관계수는 0.571이다. 따라서 LPI, LNI. TPI, TNI그리고 LPI-TNI 들의 최저속도를 이용 하여 척수 손상 여부를 판단할 수 있다고 생각된다.

  • PDF

SecM에서 유래한 접착펩타이드에 의한 라이보솜 정지를 우회하는 SSU rRNA 돌연변이체 발굴을 위한 유전학적 시스템 개발 (Development of Genetic System for Isolation of SSU rRNA Mutants that Bypass SecM-Mediated Ribosome Stalling)

  • 하혜정;김홍만;염지현;이강석
    • 미생물학회지
    • /
    • 제44권4호
    • /
    • pp.271-276
    • /
    • 2008
  • 최근 단백질 합성 과정 중 라이보솜의 일시적인 정지에 의한 라이보솜의 A자리에서 전사체가 분해되는 현상이 여러 생명체에서 보고되었다. 이러한 현상이 라이보솜의 작은 소단위체를 이루고 있는 SSU rRNA의 기능과 관련 있는지를 알아보기 위해, SecM에서 유래한 접착펩타이드에 의한 라이보솜 정지를 우회하는 SSU rRNA 돌연변이체 발굴을 위한 유전학적 시스템을 개발하였다. 이 시스템에서는 SecM에서 유래한 접착펩타이를 포함하는 CAT 단백질을 코딩하는 CAT-SecM 전사체가 플라스미드에서 유래한 SSU rRNA를 포함한 재조합 라이보솜에 의해서만 해독된다. 이러한 재조합 라이보솜은 접착펩타이드를 합성한 후 CAT-SecM mRNA 상에서 일시 정체하며, 재조합 라이보솜의 발현은 이 전사체의 양을 감소시키는 것을 확인하였다. 이러한 결과는 개발된 시스템을 이용해 라이보솜 검지를 우회하는 SSU rRNA 돌연변이체의 선별이 가능하다는 것을 보여주며, 이러한 변이체에 대한 연구는 단백질 합성 단계에서 일어나는 라이보솜 정지와 전사체 절단 현상에 있어서, SSU rRNA의 역할을 규명하는데 기여할 것이다.

침탄처리한 Ni-Cr-Mo강의 마찰-마모특성 (Friction-Wear Properties of Carburized SNCM)

  • 백승호
    • 열처리공학회지
    • /
    • 제11권3호
    • /
    • pp.159-167
    • /
    • 1998
  • In this study, friction-wear test was carried out on the carburized layer depth of a mechanical structure steel SNCM carburized with RX and LPG for 7hrs at $930^{\circ}C$ and also the wear properties of wear loss, wear rate, coefficient of friction, friction force and friction temperature were investigated. The wear properties for carburized layer of SNCM were tested on dry condition at the room temperature by the thrust load of 49~245N range at sliding speed of 0.2m/sec and the sliding speed of 0.2~1.0m/sec range at thrust load of 98N. Wear loss on the depth of carburizing layer was increased with increasing of thrust load and sliding speed, and with decreasing of hardness. The condition of worn surfaces were showed mild wear at less than the thrust load of 98N and sliding speed of 0.6m/sec but were showed severe wear at more than 98N and 0.6m/sec. The friction load and temperature were increased with increasing of thrust load but with increasing sliding speed was appeared minimum at 0.6m/sec. With increasing thrust load the wear rate was increased and the coefficient of friction was decreased, but with increasing sliding speed the wear rate and the coefficient of friction were decreased in 0.2~0.6m/sec and increased in 0.6~1.0m/sec, therefore 0.6m/sec in this testing is a transition velocity.

  • PDF

엘리트 여자 100m 허들선수의 스타트에서 피니쉬까지 구간별 수평속도 및 기록에 관한 운동학적 분석 (The Kinematic Analysis of Horizontal Velocity and Records from Start to Finish of the Elite Women 100m Hurdler)

  • 이정호;류재균
    • 한국운동역학회지
    • /
    • 제17권3호
    • /
    • pp.31-39
    • /
    • 2007
  • The purpose of this study was to observe the kinematic pattern of elite women 100m hurdler race from start to finish and analyze how the change of horizontal velocity makes an influence on the athletes' performance. The analysis was based on the performance of Korean elite 100m hurdler A and international elite hurdlers B and C. Following results were drawn from the analyzation of elite 100m hurdlers' technical characteristics; During the race, hurdler A made more than 8 m/s of horizontal velocity at the 3rd, 4th, 6th, and the 7th hurdle. The horizontal velocity peaked at the 4th hurdle with 8.23 m/s. On the other hand, hurdler B and hurdler C maintained more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. Hurdler B's fastest horizontal velocity was 8.67 m/s from the 6th to the 7th hurdle and hurdler C's fastest horizontal velocity was 8.85 m/s from the 5th to the 8th hurdle. From the start line to the 3rd hurdle, the times achieved by hurdlers A, B, and C were 4.90 sec, 4.65 sec, and 4.52 sec. In the middle of the race, which is from the 4th hurdle to the 7th hurdle, hurdlers A, B, and C ran in 9.10 sec, 8.60 sec, and 8.38 sec. And the latter part of the race to the 10th hurdle, the times hurdlers A, B, and C hit were 12.32 sec, 11.66 sec, and 11.32 sec. To the finish line, it took 1.15 sec for hurdler A, 1.1 sec for B, and 1.06 sec for C. Hence, to set the record of sub-13 sec, hurdler A should improve her acceleration from the start line to the 1st hurdle with the speed more than 5.4 m/s and should maintain more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. In addition, hurdler A should improve her speed endurance to minimize the deceleration of horizontal velocity from the 4th hurdle to the final hurdle. If hurdler A could shorten 0.05 sec of time in each hurdle section, she would be able to set the record under 13 seconds.

GEANT4를 이용한 $^{99m}Tc$ 주입시 손가락 선량계산 (Finger Doses Received during $^{99m}Tc$ Injections Calculated with GEANT4)

  • 한동현;강상구;김종일
    • Journal of Radiation Protection and Research
    • /
    • 제33권1호
    • /
    • pp.41-46
    • /
    • 2008
  • [ $^{99m}Tc$ ]를 주사할 때 시술자의 손가락에 흡수되는 방사선량을 예측하기 위해, GEANT4를 이용하여 초당 370 MBq의 방사능량을 가지는 0.4 mL 체적의 $^{99m}Tc$ 선원을 대상으로 각 손가락에 대한 등가선량을 구하였다. 시뮬레이션 결과, 오른손 엄지($0.29\;{\mu}Sv{\cdot}sec^{-1}$), 검지($1.19\;{\mu}Sv{\cdot}sec^{-1}$), 중지($1.07\;{\mu}Sv{\cdot}sec^{-1}$), 왼손 엄지($4.36\;{\mu}Sv{\cdot}sec^{-1}$), 검지($3.37\;{\mu}Sv{\cdot}sec^{-1}$)의 등가선량을 얻을 수 있었다. 이와 같은 계산 결과는 $^{99m}$Tc 주입시 시술자의 손가락에 흡수되는 선량을 예측할 수 있는 유용한 기초자료로 활용될 수 있을 것이다.

酸性溶媒 속에서의 ${\beta}$-Nitrostyrene에 대한 Mercaptan의 親核性 添加反應에 관한 연구 [IV] n-Amyl-, n-Hexyl-, n-Octyl-, n-Decyl-Mercaptan과의 반응 (The Kinetics and Mechanism of Nucleophilic Addition of Mercaptan to ${\beta}$-Nitrostyrene in Acid Media Part IV. The Reactions of n-Amyl, n-Hexyl, n-Octyl, and n-Decyl Mercaptan with ${\beta}$-Nitrostyrene)

  • 김태린;최영상
    • 대한화학회지
    • /
    • 제13권3호
    • /
    • pp.221-228
    • /
    • 1969
  • Nucleophile의 親核性 添加反應性을 정량적으로 연구하고자 전보에 이어 3,4-methylenedioxy-${\beta}$-nitrostyrene에 대한 n-amyl, n-hexyl, n-Octyl, n-decylamercaptanㅓ의 添加反應速度常數를 측정한 결과 n-amylmercaptide, n-hexylmercaptide, n-octylmercaptide, n-decylmercaptide ino에 대해 각각 2.82${\times}10^8$, 100${\times}10^8$, 2.23${\times}10^8$과 1.77${\times}10^8$ $M^{-2} .sec^{-1}$를 얻었고, n-amyl, n-hexyl, n-Octyl, n-decylmercaptan분자에 대해서는 각각 2.82${\times}10^{-2}$, 1.95${\times}10^{-2}$, 7.08${\times}10^{-2}$과 5.63${\times}10^{-2}$$M^{-1} . sec^{-1}$를 얻었으며, 염기성뿐만 아니라 산성용매 속에서도 그의 반응메카니즘을 잘 설명할 수 있는 반응속도 식도 구하였다.

  • PDF

전산유체역학을 이용한 풍력 선별기의 선별효율 연구 (The Study of the Separation Efficiency of Wind Power Selector Using Computational Fluid Dynamics)

  • 이건주
    • 유기물자원화
    • /
    • 제21권3호
    • /
    • pp.74-81
    • /
    • 2013
  • 본 연구는 생활폐기물 처리에서 매립되는 폐기물량을 줄이고 재활용비율을 늘리기 위하여 고안된 풍력선별기 (공기의 흐르는 방향을 이용하여 공기 중에서 비중분리를 수행하는 방법)에 대하여 ANSYS사의 CFX Program을 이용한 수치 해석적 방법을 통해 풍력선별기의 모형을 설계 및 제작하고 시뮬레이션을 통해 풍력에 따른 폐기물의 분리 효율을 고찰하였다. 흡입장치에서 비닐봉지 1000mL를 흡입하도록 설계할 때 입구 풍속은 0.9 m/sec 이상에서 100%효율을 얻을 수 있었고 1.6 m/sec 이상에서 의 플라스틱병 500mL 와 플라스틱병 1500mL의 혼합 폐기물 효율의 100 % 알루미늄 250mL 선별 효율은 2.3 m/sec 이상에서 100% 마지막으로 알루미늄 250mL를 5mm 두께 압축 선별 효율은 2.4 m/sec 이상에서 90% 임을 알 수 있었다.

한국해협을 통과하는 해수용적수송량의 계절 및 영년변화 (Seasonal And Secular Variations Of The Water Volume Transport Across The Korea Strait)

  • 이석우
    • 한국해양학회지
    • /
    • 제1권1_2호
    • /
    • pp.7-13
    • /
    • 1966
  • 한국해협(韓國海峽)을 통과(通過)하는 해수용적수송량(海水容積輸送量)의 계절(季節) 및 영년변화(永年變化)에 대(對)하여 기존자료(旣存資料)를 써서 지형유리론(地衡流理論)에 입각(立脚)하여 계산(計算) 음미(吟味)하였다. 한국해협(韓國海峽)을 통과(通過)하는 “쯔시마” 난류(暖流)의 북방수송량(北方輸送量)은 약 $2{\times}10^6m^3$/sec의 우세(優勢)한 년변화량(年變化量)을 갖고 동춘절(東春節)의 $0.33{\times}10^6m^3$/sec 로부터 하추절(夏秋節)의 $2.21{\times}10^6m^3$/sec 사이에서 변화(變化)한다. 그리고 정미(正味)의 수송량(輸送量)의 년평균치(年平均値)는 1935년(年)의 $1.3{\times}10^6m^3$/sec 로부터 1939년(年)의 $0.8{\times}10^6m^3$/sec사이로 변화(變化)하며 영년변화량(永年變化量)은 약 $0.5{\times}10^6m^3$/sec로서 년변화량(年變化量)의 약 1/4밖에 안된다. 북방수송량(北方輸送量)의 영년변화(永年變化)는 약(約) 4년주기(年週期)를 갖는 것 같이 보인다.

  • PDF

정상성인의 신경전도속도에 관한 연구 (A Study of Nerve Conduction Velocity of Normal Adults)

  • 최경찬;허종상;변영주;박충서;양창헌
    • Journal of Yeungnam Medical Science
    • /
    • 제6권1호
    • /
    • pp.151-163
    • /
    • 1989
  • 건강한 성인 83명을 무작위로 선정하여 실시한 신경전도속도 검사에서 다음과 같은 결과를 얻었다. 1) 상지의 정중신경에서는 운동신경의 TL이 3.0-4.2msec 이고, MNCV는 각각 52.1-70.3m/sec(W-E), 44.6-71.0m/sec(E-Ax), 56.6-70.8m/sec(W-E), 50.5-75.1m/sec(E-Ax)이며, CNAP의 진폭은 $6.5-46.1{\mu}V$였다. 2) 척골신경에서는 운동신경의 TL이 2.4-3.4msec이고, MNCV는 각각 54.6-72.8m/sec(W-E), 41.1-64.9m/sec(E-Ax)이며, 진폭은 3.1-12.0mV였다. 척골신경의 MNCV는 각각 31.1-44.7m/sec(F-W)m, 55.9-70.9m/sec(W-E), 46.9-67.1m/sec(E-Ax)이며, CNAP의 진폭은 4.8-42.9${\mu}V$범위였다. 3) 요골신경에서는 운동신경의 TL이 1.9-2.7msec이고, MNCV는 53.1-77.5m/sec(W-E)이며, CMAP의 진폭은 1.1-6.6mV범위였다. 요골신경의 SNCV는 각각 38.5-52.1m/sec(F-V), 53.2-75.2m/sec(W-E) 이며, CNAP의 진폭은 $2.5-9.2{\mu}V$범위였다. 4) 하지의 비골신경에서는 운동신경의 TL이 3.5-5.7msec이며, MNCV는 각각 44.4-58.6m/sec(A-FH), 42.8-65.8m/sec(FH-PF)이며, CMAP의 진폭은 0.6-12.7mV 범위였다. 5) 후경골신경에서는 TL이 4.0-6.2m/sec이며, MNCV는 40.6-60.6m/sec이며, CMAP의 진폭은 3.9-29.2mV범위였다. 6) 비골신경의 SNCV는 37.5-49.5m/sec이며, CNAP의 진폭은 $0.7-17.1{\mu}V$범위였다. 7) H-반사의 평균 잠복기는 28.4msec였다.

  • PDF