• 한국해양환경ㆍ에너지학회지
• /
• 제17권1호
• /
• pp.13-19
• /
• 2014

막분리법에 의한 해수 담수화시 공급 원수 온도는 막성능에 영향을 미친다. 특히 폐열원을 이용하여 분리막 투과량을 증대시키고자 하는 경우에는 고온의 공급 원수가 분리막 성능에 미치는 영향을 정확히 분석하여 적용하는 것이 필요하다. 온도에 의한 막투과 성능 분석을 위해 $10^{\circ}C$에서 $60^{\circ}C$까지 공급 해수 온도를 변화시키면서 실험을 실시하였다. 온도가 상승하면서 투과량이 증가하는 경향을 물의 점성 변화와 막의 변화로 나누어서 분석하였다. NF 막에서는 온도에 따른 물의 점성 변화로 투과량 변화를 예측할 수 있었으나 RO막의 경우는 물의 점성변화로 예측한 투과량과 실험에 의한 투과량은 $60^{\circ}C$에서 30%정도 차이가 나타났다. 이는 RO막이 원수 온도가 상승함에 따라 막의 수축이 일어나 공극의 크기가 8%정도 감소함에 기인하는 것으로 추정된다. 따라서 막분리식 해수 담수화에서 투과량을 증대시키기 위한 온도 상승은 막변형이 일어나지 않는 범위 내에서 효과적으로 수행하여야 할 것이다.

• Steel and Composite Structures
• /
• 제47권6호
• /
• pp.781-794
• /
• 2023

In order to directly apply seawater and sea sand in construction without desalination, a type of square concrete-filled steel tube (CFST) encased with prefabricated seawater sea-sand concrete filled Polyvinyl Chloride (PVC)/Glass Fiber Reinforced Polymer (GFRP) tube column was proposed. Twenty short columns were tested under uniaxial loads, and the test parameters included inner tube types, seawater sea-sand concrete replacement ratios, concrete strength, the wrapping area of Carbon Fiber Reinforced Polymer (CFRP) strips and the thickness of GFRP tube. The effects of the parameters on failure modes, loading capacity, ductility and strain responses were discussed. All the tested specimens failed with serious buckling of the steel tubes and fracture of the inner tubes. The specimens had good residual bearing capacity corresponding to 64% to 88.9% of the peak capacity. The inner GFRP tubes and PVC tubes wrapped by CFRP strips provided stronger confinement to the core concrete, and were good choices for the proposed columns. Moreover, an analytical model for the composite column with different inner tube types was proposed.

• 청정기술
• /
• 제20권1호
• /
• pp.13-21
• /
• 2014

최근 도서지역 지하수의 염분증가로 인해 지하수가 점차 생활용수로 부적합해 짐에 따라 해수담수화의 필요성이 크게 대두되고 있다. 이러한 해수담수화를 수행하기 위해서는 많은 에너지 비용이 들어가는데, 최근 에너지가격의 상승으로 경제성 확보가 어려운 실정이다. 지열에너지를 활용한 연계형 플랜트가 문제를 해결하는 중요한 방법이 될 수 있다. 지열시스템은 지구 내부의 온도를 이용하는 방법으로서 항상 온도가 일정하며 24시간 활용할 수 있어 이용률이 높다는 장점이 있기 때문이다. 본 연구에서는 지열을 보조열원으로 활용한 진공 막 증류법 해수담수화 플랜트를 설계하고, 지열과 연계하지 않은 일반 진공 막 증류법 해수담수화 플랜트와 경제성 비교분석을 했다. 그 결과 할인율 5%일 경우 지열연계형이 $23,822,409 만큼 더 높은 순현재가치 값을 가지며, 운영기간 5.36년을 분기점으로 두 플랜트의 현금흐름이 역전되어 지열연계형 플랜트가 일반 진공 막 증류법 해수담수화 플랜트보다 더 큰 경제성을 갖는 결과를 얻었다. 또한 민감도 분석에서 주요 변수들간의 결과값 비교를 한 결과, 스팀이용비용의 변동폭이 가장 큰 영향을 미친 점에 비추어 스팀비용이 높은 지역일수록 지열에너지 연계형 플랜트가 경제적이고 효과적인 솔루션인 것으로 증명되었다.

• 대한환경공학회지
• /
• 제36권4호
• /
• pp.251-257
• /
• 2014

본 연구는 RO 해수담수화 전처리 공정으로써 응집 및 여과공정에 대하여 수행되었다. RO 시스템은 충분하고 안정적인 전처리를 통하여 RO 막오염을 완화 할 수 있는 우수한 수질을 공급할 수 있어야 한다. 본 실험은 RO 막 공정의 전처리로서 다양한 응집제 주입량, 응집 교반 강도 및 시간, 탁도, 여과속도 실험 조건을 사용하여 응집과 여과공정의 효과를 조사하기 위하여 수행되었다. 본 연구 결과 적합한 RO 공급수로 적절한 SDI 값을 나타내기 위한 최적 전처리 조건은 응집 pH 6.5, 탁도 4 NTU 이상 그리고 여재 충진 높이가 550 mm 이상인 것으로 나타났다. 그러나 응집교반 강도, 응집제 주입농도와 여과속도는 여과효율에 비교적 큰 영향을 미치지 않은 것으로 나타났다.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.73-81
• /
• 2014

Ocean thermal energy conversion(OTEC) is a power generation method that utilizes temperature difference between the warm surface seawater and cold deep sea water of ocean. As potential sources of clean-energy supply, Ocean thermal energy conversion(OTEC) power plants' viability has been investigated. Therefore, this paper evaluated the thermodynamic performance of solar-OTEC convergence system for the production with electric power and desalinated water. The comparison analysis of solar-OTEC convergence system performance was carried out as the fluid temperature, saturated temperature difference and pressure of flash evaporator under equivalent conditions. As a results, maximum system efficiency, electric power and fresh water output show at 40, 10, 2.5 kPa of the flash evaporator pressure, respectively. And their respective enhancement ratios were approximately 6.1, 18, 8.6 times higher than that of the base open OTEC system. Also, performance of solar-OTEC system is the highest in the flash evaporator pressure of 10 kPa.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.201-201
• /
• 2010

The evaporative desalination system with solar energy would be the efficient and attractive method to get fresh water. This study was described the development of Multi Effect Distillation(MED) with solar energy desalination system. The system was designed and manufactured Multi effect distillation on the capacity of $3m^3$/day. The experimental apparatus consists mainly of ejector pump, Hot water pump, flow meter, demister, cooler, evaporator and condenser. Evaporator and condenser were made Shell&Tube Heat Exchanger type with corrugated tube. The experimental variables were chosen $75^{\circ}C$ for hot water inlet temperature, 40, 60 and $80{\ell}$/min for hot water inlet volume flow rate, 6.0 and $8.0{\ell}$/min for evaporator feed seawater flow rate, $18^{\circ}C$ for sea water inlet temperature to cover the average sea water temperature and the salinity of sea water is measured about 33,000 PPM (parts per million). for a year in Korea. This study was analyzed the results of thermal performance of Multi Effect Distillation. The results are as follows, The experimental Multi effect distillation is required about 40 kW heat source for production of $3m^3$/day fresh water. Various operating flow rate was confirm in the experiments to get the optimum design data and the results showed that the optimum total flow was $8.0{\ell}$/min. Comparison of Single Effect Distillation with Multi Effect Distillation showed MED is at least more than double of SED.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.59-68
• /
• 2013

본 연구에서는 한외여과막과 역삼투압막으로 이루어진 해수담수화장치를 구성하였다. 해수를 취수하여 디스크필터와 한외여과막을 이용한 전처리설비를 통과시켜 생산한 전처리수의 $SDI_{15}$와 탁도를 측정하여 역삼투압해수담수설비에 적합함을 밝혔다. 역삼투압해수담수설비의 부산물인 브라인을 전처리수와 혼합하여 역삼투압해수담수설비의 입구농도를 변화시켰다. 농도 변화실험에서, 해수농도가 역삼투압해수담수설비의 성능에 끼치는 영향을 실험으로 구하였다. 염배제율, 회수율, 생산수의 수질은 입구농도에 따라 많은 변화가 있었으며, 에너지소비량도 입구농도에 거의 선형적으로 상승하는 것을 실험으로 구하였다.

• 상하수도학회지
• /
• 제34권1호
• /
• pp.53-60
• /
• 2020

Due to global climate change, Korea is experiencing flooding and drought severely. It is hard to manage water resources because intensive precipitation during short periods and drought are commonly occurred in Korea, recently. Severe drought occurred in 2015 and 2017 in the islands, and coastal and inland areas in Korea, and the citizens experienced decreased water supply and emergency water service by using bottled water. Therefore, the Korean government provided additional governmental funds such as the grant of drought disaster. In this study, we tried to calculate the cost of water for drought response based on the cost of tap water for the regional local governments in Korea and the grant of drought disaster by the Ministry of the Interior and Safety in Korea, etc. The estimated costs of water for drought responses in coastal and inland areas which have a chance to apply alternative water sources such as brackish or seawater desalination and water reuse in Korea were higher than in other areas in Korea. Additionally, as the novel approach of drought response, the 300 ㎥/day-scale desalination vessel was suggested to provide desalinated water for the islands in Korea. The estimated expenses of water supply for the target island areas (Sinan-gun and Jindo-gun) by the desalination vessel was lower than those by emergency water service by using bottled water.

• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.159-173
• /
• 2011

The air gap membrane distillation (AGMD) process was applied for water desalination. The main objective of the present work was to study the heat and mass transfer mechanism of the process. The experiments were performed on a flat sheet module using aqueous NaCl solutions as a feed. The membrane employed was hydrophobic PTFE of pore size 0.22 ${\mu}m$. A mathematical model is proposed to evaluate the membrane mass transfer coefficient, thermal boundary layers' heat transfer coefficients, membrane / liquid interface temperatures and the temperature polarization coefficients. The mass transfer model was validated by the experimentally and fitted well with the combined Knudsen and molecular diffusion mechanism. The mass transfer coefficient increased with an increase in feed bulk temperature. The experimental parameters such as, feed temperature, 313 to 333 K, feed velocity, 0.8 to 1.8 m/s (turbulent flow region) were analyzed. The permeation fluxes increased with feed temperature and velocity. The effect of feed bulk temperature on the boundary layers' heat transfer coefficients was shown and fairly discussed. The temperature polarization coefficient increased with feed velocity and decreased with temperature. The values obtained were 0.56 to 0.82, indicating the effective heat transfer of the system. The fouling was observed during the 90 h experimental run in the application of natural ground water and seawater. The time dependent fouling resistance can be added in the total transport resistance.

• 상하수도학회지
• /
• 제32권4호
• /
• pp.301-307
• /
• 2018

Membrane distillation (MD) is a thermally driven desalination process with a hydrophobic membrane. MD process has been known to have a lower fouling potential compared to other pressure-based membrane desalination process (NF, RO). However, membrane fouling also occurs in MD process. In this study, the membrane fouling was observed in MD process according to the pre-treatment processes. The filtration and precipitation processes were applied as the pre-treatment to prevent the membrane fouling. The pore sizes of roughing filters were 0.4, 5, 10, 30, and $60{\mu}m$. The concentration of the coagulant was 1.2 mg/L as $FeCl_3$. The membrane fouling on MD membrane was successfully removed with both pre-treatment processes.