• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.108-114
• /
• 2010

The injection nozzle of an electro-hydraulic injector is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the effects of needle movement in a piezo-driven injector on unsteady cavitating flows behavior inside nozzle were investigated by cavitation numerical model based on the Eulerian-Lagrangian approach. Aimed at simulating the 3-D two-phase flow behavior, the three dimensional geometry model along the central cross-section regarding of one injection hole with real design data of a piezo-driven diesel injector has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and 'pseudo' steady state, even if under steady state boundary conditions. As this research results, we found that it could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle.

• 보건교육건강증진학회지
• /
• 제26권4호
• /
• pp.49-62
• /
• 2009

Objectives: Few studies have focused on health behaviors and health status among teachers even though these are one of principles and values of WHO's Health Promoting Schools. In this study, we described health behaviors and health status among teachers and explored the differences of these by personal and school characteristics. Methods: A stratified and random cluster sampling design was used to obtain a cross-sectional sample. A total of 59 elementary, middle and high schools in Seoul and Gyeonggi areas were included in which 333 teachers (males 40.6%, females 59.4%) participated in this survey. Chi-square tests were conducted with SPSS 17.1. Results: Overall, health behaviors and health status among teachers were better than the general public according to Korea National Health and Nutrition Examination Survey. Male and middle/high school teachers had higher prevalence of alcohol dependence and of driving under the influence of alcohol. Also, their rate of wearing seat belts were lower compare to female. In other hand, female, health and nutrition teachers, rural school teachers had lower prevalence of meeting recommended levels of physical activity. Underweight were more prevalent to them in contrast to male with higher prevalence of obesity. In addition, teachers of health promoting schools were not likely to ride on a car with a drunk driver. They also have a lower prevalence of skipping breakfast and have higher positive perception of health for themselves. Conclusion: Teachers' health should be given higher concerns as a key component of school based health promotion. Gender and age specific programs should be considered to develop health promoting programs for them.

• 한국사회복지학
• /
• 제68권3호
• /
• pp.51-71
• /
• 2016

이 연구의 목적은 한국을 포함한 OECD 주요국을 대상으로 사회구조적 요인, 복지제도, 노동시장 및 정치제도 등 독신모가구 빈곤의 국가 간 다양성에 영향을 끼치는 거시적 원인을 규명하는 것이다. 1981년부터 2012년 기간에 대해 불균형패널설계(unbalanced panel design)방법을 적용한 결합시계열회귀분석을 실시했다. 연구결과 독신모가구의 빈곤율은 국가 간 다양성이 현저했다. 1인당GDP는 빈곤위험감소에 기여하지 못했고, 여성고용율과 15세미만 아동비율은 빈곤위험을 증가시켰다. 전체사회복지지출, 아동에 대한 현금지출, 노조조직률, 정규직에 대한 고용보호, 비례대표선거제도, 누적좌파내각, 누적여성의석수는 독신모가구의 빈곤위험을 감소시키는 요인으로 나타났다. 한국은 경제성장 일변도와 노동시장유연화 위주의 탈빈곤전략에서 탈피해 보편적 복지제도, 아동에 대한 복지급여와 일-가정양립정책을 확대할 필요가 있다. 나아가 노조조직률향상과 고용보호확대 등 조정된 노동시장제도를 설계하고, 비례대표선거제도 등 합의제정치모델을 도입해 좌파정치세력과 여성의 정치적 대표성을 확립할 필요가 있다.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.503-518
• /
• 2003

Statement of problem : There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combinations on two randomly selected implants from each of four manufactures. Material and methods : In this study, screws were respectively used to secure a cemented abutment, to a hexlock implant fixture ; teflon coated titanium alloy screw(Torq-Tite) and titanium alloy screw in Steri--Oss system, gold-plated gold-palladium alloy screw(Gold-Tite) and titanium alloy screw in 3i system gild screw ana titanium screw in AVANA Dental Implant system, and titanium screws in Paragon System. The implants were perpendicularly mounted in polymethyl methacrylate autopolymerizing acrylic resin block(Orthodontic resin, Densply International Inc. USA) by use of dental surveyer. Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10 minutes. All samples were cross sectioned with grinder-polisher unit(Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc) Results : There were the largest gaps in the neck areas of screws in hexagonal extension implants which were examined in this study. The leading edge of the abutment screw thread (superior surface) was in contact with the implant body thread, and the majority of the contacting surfaces were localized to the middle portion of the mating threads. Considerable variation in the contacting surfaces was noted in the samples evaluated. Amounts of contact in the abutment screw thread were larger for assemblies with Gold-Tite screw, gold alloy screw. Torq-Tite screw than those with titanium screws. The findings of intimate contact between the screw and screw seat were seen in all samples, regardless of manufacturers. However, microgap between the head and lateral neck surface of the screw and the abutment could be dectected in all samples. The findings of intimate contact between the platform of the implant and the bottom of the abutment were consistent in all samples, regardless of manufacturers. However, microgaps between the lateral surface of external hex of the fixture and the abutment could be dectected in all samples. Conclusion : Considerable variations in machining accuracy and consistency were noted in the samples and the implant-abutment-screw interfaces were incomplete. From the results of this study, further development of the system will be required, including improvements in pattern design.

• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.192-209
• /
• 2004

Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combination or internal connection type. Material and methods: In this study, each two randomly selected internal implant fixtures from ITI, 3i, Avana, Bicon, Friadent, Astra, and Paragon system were used. Each abutment was connected to the implant with 32Ncm torque value using a digital torque controller or tapping. All samples were cross-sectioned with grinder-polisher unit (Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc). Then optical microscopic and scanning electron microscopic(SEM) evaluations of the implant-abutment interfaces were conducted to assess quality of fit between the mating components. Results : 1) Generally, the geometry of the internal connection system provided for a precision fit of the implant/abutment into interface. 2) The most precision fit of the implant/abutment interface was provided in the case of Bicon System which has not screw. 3) The fit of the implant/abutment interface was usually good in the case of ITI, 3I and Avana system and the amount of fit of the implant/abutment interface was similar to each other. 4) The fit of the implant/abutment interface was usually good in the case of Friadent, Astra and Paragon system. The case of Astra system with the inclined contacting surface had the most Intimate contact among them. 5) Amount of intimate contact in the abutment screw thread to the mating fixture was larger in assembly with two-piece type which is separated screw from abutment such as Friadent, Astra and Paragon system than in that with one-piece type which is not seperated screw from abutment such as ITI, 3I and Avana system. 6) Amount of contact in the screw and the screw seat of abutment was larger in assembly of Friadent system than in asembly of Astra system of Paragon system. Conclusion: Although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal implant-abutment connections which provides intimate contact with the implant walls to resist micro-movement, resulting in a strong stable interface. From the results of this study, further research of the stress distribution according to the design of internal connection system will be required.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권2호
• /
• pp.437-444
• /
• 2017

기계구조물 부재의 단면에 구멍이나 또는 단면이 급격히 변화할 경우, 불연속 부분 주위에서 응력집중이 일어나며 파손이 발생하는 주요 원인이 된다. 그 이유는 부재에 작용하는 평균 응력보다 응력집중 부분에서 훨씬 큰 응력이 작용하기 때문이다. 본 논문에서는 시편의 부분 관통 구멍 주위에서 응력해석을 수행하여 구멍을 통과하는 선상의 주응력 차 값을 구하였다. 광탄성에서 최대주응력과 최소주응력의 차이는 등색프린지 차수와 재료의 프린지 상수를 곱한 값을 빛이 통과한 거리 즉, 시편의 두께로 나눈 값과 같다. 즉, 주응력의 차이는 광탄성 프린지 차수와 비례관계가 있으므로 유한요소해석에 의한 주응력 차이의 분포를 광탄성 실험결과에 비교할 수 있다. 유한요소 범용 소프트웨어인 ANSYS Workbench를 이용하였으며 유한요소법으로 해석된 값을 광탄성 실험으로부터 측정된 값과 비교한 결과 유사한 결과를 얻었다. 이로서 유한요소해석 결과는 실험결과와의 비교를 통해 타당성이 입증될 수 있었다. 또한 구멍깊이 변화에 따라 나타나는 응력분포를 사용하여 응력집중계수를 구하였다. 구멍깊이가 증가할수록 응력집중계수는 증가함을 나타냈다.