• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.111-111
• /
• 1994

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.981-986
• /
• 2003

In order to investigate the possibility of processing of brittle material by ball impact, the effects of boundary conditions about impact damage of soda-lime glass by small spheres were evaluated experimentally. It was investigated that crack appearance developed in soda-lime glass with boundary conditions of without sealing, single-sealing and double-sealing by impact velocity. The double-sealing was most effective in the development of perfect cone than other boundary condition. In case of double-sealing condition, PVC and Polyurethane sealing were more effective in producing a perfect cone formation than other sealing materials. The impact velocity range over which perfect cones were formed was influenced by both the contact area and diameter of impact particle.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.515-521
• /
• 2022

Various types of optical materials and devices used in special environments must satisfy durability and optical properties. In order to improve the durability of zinc sulfide multispectral (MS ZnS) substrates with transmission wavelengths from visible to infrared, Ge-Sb-Se-based chalcogenide glass was used as a sealing material to bond the MS ZnS substrates. Wetting tests of the Ge-Sb-Se-based chalcogenide glass were conducted to analyze flowability as a function of temperature, by considering the glass transition temperature (T_g) and softening temperature (T_s). In the wetting test, the viscous flow of the chalcogenide glass sample was analyzed according to the temperature. After placing the chalcogenide glass disk between MS ZnS substrates (20 × 30 mm), the sealing test was performed at a temperature of 485 ℃ for 60 min. Notably, it was found that the Ge-Sb-Se-based chalcogenide glass sealed the MS ZnS substrates well. After the MS ZnS substrates were sealed with chalcogenide glass, they showed a transmission of 55 % over 3~12 ㎛. The tensile strength of the sealed MS ZnS substrates with Ge-Sb-Se-based chalcogenide glass was analyzed by applying a maximum load of about 240 N, confirming its suitability as a sealing material in the far infrared range.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권5호
• /
• pp.47-54
• /
• 1991

The lip seals widely used nowadays in stern tube sealing system of ships have radial sealing contact with shafts or liners, on the other hand the face seals of stern tube sealing system have axial sealing contact with seat. Because of axial sealing contact, the face seals have a large number of merits such as durability of life, simplicity of structure, easy fitting and replacement, etc. In this paper, for the purpose of development of face seals, the fundamental properties of axial sealing contact were analyzed and a trial face seal was designed and manufactured using N.B.R. rubber and Thordon which is widely used for bearing materials. The seal proper of trial face seal was made from N.B.R. rubber and the face insert was made from Thordon, thermosetting resins which are three dimensional, cross linked condensation polylmers. The performance test of trial face seal was carried out on the test bench which was specially designed and manufactured. The results were satisfactory enough to be used in practical stern tube sealing system.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.151-157
• /
• 1991

The roles of temporary sealing materials used in endodontics are impotant Especially, its marginal sealing properties affect endodontic success and failure in endodontic treatment The purpose of this in vitro study was to compare and evaluate the marginal sealing properties of various temporary restorative materials used in endodontic access cavity by using electrochemical method. Standard endodontic access cavities were prepared in extracted human molar teeth and filled with Caviton, IRM, zinc oxide - eugenol cement. Each specimen was immersed in 1 % solution of KCl, and applied a potential of 9 V external power supply. Marginal microleakage and water sorption were measured for marginal sealing effect evaluation in comparison with each group. A comparative study of the obtained results have led to the following conclusions. 1. The Caviton group showed lower marginal microleakage value than the zinc oxide - eugenol cement and IRM group the 6 th day after. The IRM group showed lwoer marginal microleakage value than the zinc oxide - eugenol cement group from the 6 th day to the 12 th day. But there was no significant difference between zinc oxide - eugenol cement and IRM group after the 13 th day. 2. As time went by, marginal microleakage value was increased in Caviton, IRM and zine oxide - eugenol cement.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.270-276
• /
• 2020

The long-term durability of an FKM O-ring used as parts of a hydrogen station was investigated by exposing it to high-pressure gaseous hydrogen for 1, 3, and 7 days at room temperature. Changes in its sealing force were subsequently measured at 150℃ using intermittent compression stress relaxation (CSR). No changes in the tensile properties of FKM O-ring were observed, but its initial and overall sealing forces at 150℃ significantly decreased with increasing exposure time to hydrogen gas. Microvoid formation in the FKM O-ring upon exposure to high-pressure hydrogen was minimized over time after the ring was exposed to atmospheric pressure at room temperature, which prevented changes in its tensile properties. However, applying heat accelerated FKM O-ring oxidation, which decreased its sealing force. These results indicated that identifying changes in the sealing force of rubber materials using intermittent CSR is not sufficient for monitoring changes in mechanical properties under high-pressure hydrogen atmospheres; however, it is suitable for evaluating the long-term durability of sealing materials for hydrogen station applications under similar conditions.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.22-33
• /
• 2005

폐타이어 분말(GRT)을 재활용하기 위하여 sheet type 4그룹과 soft type 1그룹의 자체보수성 방수재를 제조하였다. 각각 방수재의 방수특성을 고찰하기 위하여 방수재들의 물성을 측정하였다. 방수재는 GRT/ 고흡수성수지/ binder로 구성되었으며, internal mixer로 혼합한 후 hot press로 성형하여 제조 되었다. 방수재 제조에 사용된 CRT의 평균입도는 -40mesh 이었고, 고흡수성 수지는 상용품과 poly(AM-SAS-AA)를 제조하여 사용하였고, binder는 PU, EVA, LDPE, SBR, poly(2-EHA)을 사용하였다. 또한 방수재의 물성을 향상시키기 위하여 보강재로 PU film을 사용하였다. 폐타이어 분말을 이용하여 개발된 sheet type 자체보수성 방수재 중 GRT/ CE-500F/EV-600/PU film 과 GRT/GE-500F/SBR(vulcanization)/PU film 로 구성된 방수재가 기존 상용제품의 물성에 근접하였다. 또한 soft type 방수재는 GRT/GE-500F/Poly(2-EHA)와 GRT/P(AM-SAS-AA)/Poly(2-EHA)로 구성된 방수재가 상용제품의 흡수능보다 4-20배의 개선된 결과를 나타내었다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.150-155
• /
• 2013

This work present a new method of sealing inspection system for vehicle in which foam rubber materials are used for sealing the vehicle parts. This system is composed from a devices comprising non-contact and real-time scanning on visual inspection in machine parts. We have been investigated qualitative factors that influenced on sealing system of vehicle structure which flexibly attenuated vibration and plenty of foam rubber materials having elastic property. However, there are different factors which still depended on outdated technique (personnel subjective judgment) in the performance inspection of rubber parts, specially for cross section inspection. Through a newly developed inspection system which recently applied for the production line, we successfully achieved more effective results of matching rate by about 80 % in the sealing performance inspection with 0.7% to 1.4% in the repeated errors. These are resulted from non-contacted response by CCD camera and vision program using geometry matching method. We expect that this system may be widely applied in the strict inspection parts of more diverse cross-section in future.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.69-69
• /
• 2005

• Restorative Dentistry and Endodontics
• /
• 제36권5호
• /
• pp.419-424
• /
• 2011

연구목적: 임상에서 주로 사용되는 가봉재가 레진 코팅된 상아질과 레진 인레이간 결합력에 미치는 영향을 밝히고, 지연 상아질 봉쇄법과 즉시 상아질 봉쇄법의 접착에 대한 효과를 비교 평가하고자 본 연구를 시행하였다. 연구 재료 및 방법: ZOE로 임시 가봉한 후 상아질 접착제로 지연 상아질 봉쇄법을 이용한 군을 1군, 즉시 상아질 봉쇄법을 이용하고 ZOE로 가봉한 군을 2군, 즉시 상아질 봉쇄법을 이용하고 Dycal로 가봉한 군을 3군, 즉시 상아질 봉쇄법을 이용하고 레진계열의 임시 가봉재로 가봉한 군을 4군으로 분류하였다. 각 그룹에서 가봉재를 제거하고 미리 제작한 레진 인레이를 와동에 합착한 후 근원심으로 절단하여 미세인장 결합 강도를 측정하였다. 결과: 1군에서 가장 낮은 결합력, 4군에서 가장 큰 결합력 나타내었다(p < 0.01). ZOE로 임시 가봉을 한 경우 즉시 상아질 봉쇄법이 지연 상아질 봉쇄법에 비해 결합력이 컸다(p < 0.01). 결론: 레진 인레이의 상아질 접착시 지연 상아질 봉쇄법보다 즉시 상아질 봉쇄법이 권고되며, 레진 계열의 임시 가봉재가 가장 우수한 결과를 보였다.