• 제목/요약/키워드: Sealing gap

검색결과 73건 처리시간 0.023초

Teflon seal을 이용한 bayonet형 진공단열배관 (Bayonet type vacuum insulated pipes with Teflon seal)

  • 이현철;강형석
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
    • /
    • pp.173-176
    • /
    • 1999
  • Vacuum insulated pipes (VIP) are one of the important equipments for cryogenic fluids' transfer. Flange type of VIP, which can easily be installed at the site, uses a set of male and female bayonet with very small gap between them. In order to prevent leakage of liquid from inner pipe to bayonet. Teflon or Kel-F is located outside both the inner pipe of male and the guide of female. Even though liquid may leak at room temperature, it cannot leak at cryogenic temperature since Teflon shrinks much more than pipes and adheres closely to the inner pipe and guide. Teflon seal method has the advantage of easy fabrication, low cost and effective sealing compared to the conventional method.

  • PDF

플라즈마 방전 클러스터를 이용한 플렉시블 백라이트 유닛 연구 (A Study of Flexible BLU Using Plasma Discharge Ouster)

  • 유시홍;구교욱;이성의
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.324-325
    • /
    • 2008
  • In this Study, We fabricated a plasma discharge cluster with external electrodes which can be applied to flexible backlight in a polymer substrate and investigated the discharge characteristics. The Sealing process was progressed in vacuum chamber, which enable to fabricate plasma discharge cluster. The results of discharge characteristics show that the static memory margin of plasma discharge cluster was increased, as Ne/Xe(5%) gas pressure was increased. also, When gas pressure was 100torr at 600um of electrode gap, we have obtained high luminance of a plasma discharge cluster.

  • PDF

터빈 실(Seal)의 유동 해석 (Labyrinth Seal Effects in Turbines)

  • 송범호;송성진
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.158-162
    • /
    • 2000
  • Secondary flows in gas turbines, especially those associated tip clearance and labyrinth seals, have become a focus of interest for engine manufacturers. In the past, many analytical and experimental studies, which focused solely on the flows in either tip clearances or seals, have been conducted. This paper presents an analytical model that describes the flow response in a single stage turbine induced by a finite sealing gap at the turbine rotor. The flow is assumed to be axisymmetric and the analysis is done in the meridional plane. Upon going through the stage, the radially uniform upstream flow is assumed to split into two streams one associated with the seal and the other which has gone through the blades. The former is referred to as the leakage flow, and the latter is referred the as the passage flow. The passage flow is assumed to be inviscid and incompressible while the flow in the seal can be modeled as either inviscid or viscous. Thus, the model is capable of predicting the kinematic effects of labyrinth seals on the turbine flow field.

  • PDF

립실의 접촉력 및 온도분포 해석에 관한 연구 (A Study on the Contact Force and Temperature Distribution of Lip Seals)

  • 김청균;전인기;김종억
    • 대한기계학회논문집
    • /
    • 제18권6호
    • /
    • pp.1559-1566
    • /
    • 1994
  • Using the finite element method, the contact force, contact band width and temperature distribution of lip seals analyzed for the interference including some nonlinearities such as material nonlinearity, geometrical nonlinearity and nonlinear contact boundary condition. The calculated results showed that the contact stress concentrated on the contact zone between the garter spring and the rubber toward the flex side, the contact edge of lip seals. The high contact forces due to the increased interference separate the sealing gap between the lip edge and the rotating shaft. This may lead to leak the sealed oil.

자동차 엔진에서 O-링의 압출거동에 관한 수치적 연구 (Numerical Simulations on the O-ring Extrusion in Automotive Engines)

  • 이일권;김청균
    • Tribology and Lubricants
    • /
    • 제15권4호
    • /
    • pp.297-303
    • /
    • 1999
  • O-rings in automotive engines are important components such as a coolant pipe, engine oil circulating lines and fuel injector for sealing that makes efficient performance of the engine. Life cycle of O-rings is effected in environments of the O-ring seal, like that applied pressure, working temperature, precompressed ratio and materials. It is related in extrusion, expansion and fatigue failure of O-rings. In this paper, an pressurized, compressed elastomeric O-ring inserted into a rectangular groove is analysed numerically using the nonlinear finite element method. The calculated FEM results showed that extrusion ratio and contact stress are strongly related to the gap clearance and edge radius of the groove.

Efficiency Counter Electrode Discharge Cells of PDP - a macro-cell experiment

  • Kim, Young-Jin;Choi, Won-Youl;Kim, Jin-Seok;Kim, Yong-seog;Choi, Byung-Do
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.255-258
    • /
    • 2005
  • In this study, new types of counter electrode discharge cells for PDP were designed. The counter electrode discharge cells were designed to realize long-gap discharge mode, low firing voltage and moderate conductance for evacuation and sealing process of the panel. In order to test the concept of the design, macro discharge cells were prepared and the discharge characteristics were evaluated. The results indicate that discharge behavior may be modified significantly by changing the morphology of discharge cells.

  • PDF

Calcium sulfate-Hydroxyapatite 혼합재의 물성 및 치근천공 치유효과에 관한 연구 (THE PHYSICAL PROPERTIES AND HEALING EFFECT OF CALCIUM SULFATE-HYDROXYAPATITE COMPOUND ON ROOT PERFORATION)

  • 이승종;김경남
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.739-750
    • /
    • 1997
  • Treatment of root perforation elicits special considerations due to its blood-contaminated circumstances. It is known that conventional dental restorative materials are all leaking. Calcium sulfate is the material which react with water to become chemically set. This study, therefore, was performed to develop a new compound containing calcium sulfate and to evaluate its physical and biological characteristics. Three materials were used, IRM, calcium sulfate, calcium sulfate-hydroxyapatite compound. The composition of the calcium sulfate-hydroxyapatite compound was basically 50 % of calcium sulfate and 50 % of hydroxyapatite mixed with guajacol. The materials were mixed in conventional way and underwent four physical test procedures, setting time, solubility test, compressive strength, and marginal leakage test. All materials were evaluated under the scanning electron microscope to examine the marginal sealing ability. Animal experiment was also performed to test the materials' tissue response. Twenty-four dog's premolars were tested with either furcation perforations or apical retro-fillings. From the results, we found that calcium sulfate possess the good marginal sealing ability. However, calcium sulfate creates many voids which is caused by crystal thrusting action when it reacts with water. It seemed that the voids caused disintegration of the material which eventually lead to tissue reaction. By compounding calcium sulfate and hydroxyapatite, we were able to obtain the better physical properties but it showed larger marginal gap between the material and the root surface. Within the six weeks observation period, both IRM and calcium sulfate-hydroxyapatite compound showed good tissue responses in animal experiment. It is concluded that calcium sulfate would be the material of choice in root perforation repair, but the physical property needs to be further improved.

  • PDF

LPG자동차에서 밸브스템 표면거칠기가 누유특성에 미치는 영향에 관한 연구 (Surface Roughness Effects of a Valve Stem on the Leakage Characteristics in LPG Automotive)

  • 김청균;이일권
    • 한국가스학회지
    • /
    • 제11권4호
    • /
    • pp.1-6
    • /
    • 2007
  • 본 논문은 LPG 엔진에서 밸브스템의 표면거칠기가 오일 누설에 미치는 영향에 대한 실험적 결과를 제공하고자 한다. 밸브스템시일은 밸브스템과의 미세한 밀봉간극을 통해 유출하는 오일을 차단하기 위한 부품이다. 이들 두개의 부품사이에서 발생되는 밀봉성은 밸브스템과 밸브스템시일의 누유안전성과 수명연장에 관련된 중요한 요소이다. 본 실험결과에 의하면, 밸브스템의 표면거칠기를 중심선 표면거칠기, Ra로 나타낼 경우 $0.4{\sim}0.5{\mu}m$가 최적의 가공조건이고, 표면의 거칠기 단면형상은 균일하게 분포되도록 가공하는 것이 가장 이상적인 설계조건이 될 것이다. 기본적으로 매끄러운 밸브표면과 균일하게 분포된 거칠기 형상을 유지하는 것이 밸브스템과 밸브스템 시일장치의 간극을 통해 빠져나가는 누유량을 줄일 수 있다.

  • PDF

Microseal 열연화 근관충전법의 치근단 밀폐효과에 관한 연구 (THE EFFECT OF MICROSEAL OBTURATION TECHNIQUE ON THE APICAL SEAL OF ROOT CANALS)

  • 최중조;홍찬의
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.356-363
    • /
    • 1999
  • The purpose of this study was to compare the apical sealing effect of Microseal obturation technique with lateral condensation technique in 26 recently extracted single rooted teeth. The root canals were instrumented using step-back technique and obturated with laterally condensed gutta-percha or Microseal. Teeth were suspended in methylene blue dye for 2 days and then longitudinary splited. The apical microleakage and the adaptability of gutta-percha to the root canal wall were examined under a stereomicroscope at ${\times}20$ magnification. The results were as follows: 1. The mean leakage was 1.38${\pm}$1.18 mm for laterally condensed gutta-percha group, and 0.71${\pm}$0.57 mm for Microseal gutta-percha group. But there was no statistical difference between two groups. 2. In Microseal gutta-percha group, they showed no gap between the master cone and Microseal gutta-percha, and showed homogeneous mass. 3. In contrast, laterally condensed gutta-percha group showed some gaps not only between gutta-percha cones, but also between gutta-percha cones and the canal walls, and the gaps were filled with some sealer. And also this group showed some amout of sealer on the root canal walls, Within the limits of the results of this experiment, Microseal gutta-percha obturation technique demonstrated relatively favorable apical sealing effect and shorter obturation time. Thus, it is thought that this obturation technique is a acceptable method for clinical use but further studies on this matter should be conducted.

  • PDF

얼음디스펜서와 홈바가 있는 빌트인 양문형 냉장고의 구조해석 및 도어 단차와 개스킷 간극의 평가 (Structural Analysis of Built-in Side-by-Side Refrigerator with Ice Dispenser and Home Bar and Evaluation of Door Differences and Gasket Gap)

  • 류시웅;이부윤
    • 한국산학기술학회논문지
    • /
    • 제19권9호
    • /
    • pp.465-473
    • /
    • 2018
  • 냉동실 도어에 얼음디스펜서와 냉장실 도어에 홈바가 장착된 빌트인 양문형 냉장고 모델에 대하여 유한요소해석 프로그램인 ANSYS를 사용하여 캐비닛과 도어를 통합한 유한요소모델을 구성하고 변형해석을 수행하였다. 하중으로는 냉장고가 조립된 조건, 그리고 캐비닛 선반과 도어 배스킷에 적재되는 식품 부하물 하중과 냉장고 정상 작동 시의 온도분포에 의한 열하중조건을 고려하였다. 캐비닛과 도어의 변형량 해석결과에 기반하여 냉동실 도어와 냉장실 도어 사이의 상하단차와 앞뒤단차를 평가하고, 냉기 밀봉에 영향을 미치는 캐비닛 전면과 도어 내면 사이에 위치한 도어 개스킷의 간극의 증가량을 평가하였다. 부하물이 없고 냉장고가 작동하지 않는 조건의 해석결과 계산된 상하단차와 앞뒤단차는 제품 출하 시의 허용기준을 만족하는 것으로 나타났다. 부하물이 투입되고 냉장고가 정상 작동하는 열하중조건의 해석결과 계산된 상하단차와 앞뒤단차는 조립조건에 비해 증가하며 특히 앞뒤단차가 크게 증가시키는 것으로 나타났다. 열하중조건의 해석결과 계산된 캐비닛 전면과 도어 내면의 변위로부터 도어의 사각 테두리에 부착되는 개스킷 간극의 증가량을 평가하였다. 최대 간극 증가량은 냉동실 도어의 좌측 테두리에서 발생하며 제조업체에서 정한 허용기준을 만족하는 것으로 나타났다.