• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.13-22
• /
• 2005

This paper classifies the topography of the Saemangeum Tidal flats based on Landsat TM satellite images by unsupervised ISODATA method, and analysis of the spatiotemporal changes of the classified shapes. The sedimental topography represents various properties according to the Saemangeum Tidal Embankment progress. We well proceed this study of the sedimental changes and distributions. By specifying the topographic characteristics of inner sea areas respectively, the investigation on the case study area according to the changes of the tidal will be useful in the establishment of land reclamation plan and the land use of the reclaimed area. In addition, the estuary image can be divided into tidal flats and sea surfaces using the band 4, also the detailed topography using the band 5, respectively among Landsat TM 7 bands. This paper contributes to the efficient image processing of the spatiotemporal sedimental changes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.51-61
• /
• 2019

Computing the sea level slope at the BM(Bench Mark) in the coast areas around the Korean Peninsula is important for establishing height of BM of the Korean geodetic leveling network. In this study, MSL(Mean Sea Level) was recalculated with the long-term tide observation data based on the IHO(International Hydrographic Organization) standard(18.6 years), and the BM height was reanalyzed by precision leveling. The sea surface topography was analyzed by leveling at Mokpo(Mokpo Starting Point), Busan (09-00-00) and Mukho(20-26-00) BMs, and the sea level slope was computed based on the Korean vertical origin point. As a result of this study, the sea level slope of the west and east coasts between Incheon(-2.27cm) and Mukho(17.56cm) located at $37.5^{\circ}N$ was analyzed as 19.83cm. Domestic geodesists and oceanologists have confronted each other with regard to the issue of latitudinal changes in long term MSL. In the west coast, the Mokpo is 1.12cm higher than Incheon, and the Busan is 2.18cm higher than Mukho. Therefore, the west and east coasts have been analyzed as sea level slope rising to the south. It can be used to solve the reestablishment of the Korean geodetic leveling network and the problem of the elevation discrepancy in the BM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.339-342
• /
• 2003

Sea level variations and sea surface circulations inthe Korean seas were observed by Topex/Poseidon altimeter data from 1993 through 1997. In sea level variations, the West and South Sea showed relatively high variations with comparison to the East Sea. Then, the northern and southern area in the West Sea showed the range of 20-30cm and 18-24cm, and the northern west of Jeju island and the southern west of Tsushima island in the South Sea showed the range of 15-20cm and 10-15cm, respectively. High variations in the West Sea was results to the inflow in sea surface of Yellow Sea Warm Current (YSWC) and bottom topography. Sea level variations in the South Sea was due to two branch currents (Jeju Warm Current and East Korea Warm Current) originated from Kuroshio Current (KC). In sea surface circulations, there existed remarkably three eddies circulations in the East Sea that are mainly connected with North Korea Cold Current (NKCC), East Korea Warm Current (EKWC) and Tushima Warm Current (TWC). Their eddies are caused basically to the influence of currents in sea surface circulations; Cyclone (0.03 cm/sec) in the Wonsan bay on shore with NKCC, and anticyclone (0.06 cm/sec) in the southwestern area of Ulleung island with EKWC, and cyclone (0.01 cm/set) in the northeastern area of Tushima island with TWC, respectively.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.226-231
• /
• 2003

A coupling system of MM5 and POM using Stampi with different kinds of parallel computer is proposed and comparative numerical simulations of mesoscale wind induced by topography around East Sea/Sea of Japan are carried out. The results are as follows： 1) Strong horizontal conversion is induced by high mountain Pekdoo at its leeside. 2) The conversion winds at lee of high mountain are not clear in monthly and yearly mean NCEP-reanalysis because of coarse resolution of 1.86 degree by 1.86 degree. But Wind conversion is well simulated at atmosphere and ocean coupling system. And the conversion area of lee side of mountain is also agreed well with observed data of NSCAT launched in satellite ADEOS. 3) The surface ocean current is well correspondent with wind direction, induced by high mountains. And small different wind field information lead the different of particle distribution in numerical experiments of particle distribution on ocean surface.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.307-313
• /
• 2004

The trajectories of 8 autonomous profiling floats deployed in the Kuroshio Extension region in February 2001 are used to depict the circulation pattern at the surface and 2000db. The corresponding sea surface topography maps created from satellite altimeter and dynamic height climatology were compared with the tracks of nearly coincident floats and were found to agree well in most cases except for the period June 5 to 16 2001. It is shown that over the period the conspicuous breakaway of the floats from an expected path is possibly associated with the abnormal path of the Kuroshio Extension such as an outbreak event, as revealed by AVHRR infrared and SeaWiFS chlorophyll-a images and cruise data in cross sections.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.199-202
• /
• 2008

It is well-known fact that tidal difference between the ebb and flow in Yellow Sea is about 9 m so that it has largest value in the world. This wide range of tide level enables Yellow Sea water to intrude into main stream of Han River. However, the study of the tidal reach of Han River has not been carried out thoroughly since North and South Koreas share this region so that topography data and physical measurement are lacking. In this study, to examine the reverse flow and dispersion behavior by tidal effect at the tidal reach of Han River, 2-D river analysis models were applied. RMA-2 was applied to calculate the horizontal velocities and water surface elevation. With the results of velocities and water depth, RAM4, which is 2-D advection-dispersion model based on FEM was simulated to analyze the horizontal transport behavior of BOD.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.6
• /
• pp.477-483
• /
• 1987

We constructed the tidal chart of $M_2$ tide in the East Sea (Japan Sea) by an objective method. The sea level elevations at coastal stations are specified as Dirichlet boundary conditions, and the tidal constants inside of the East Sea basin are determined by the solution of the complex partial differential equation for the sea surface elevation. We studied the influences of the bottom topography and the tidal friction on the distribution of tidal chart inside of the basin. Using the results of basin-wide tidal model, we constructed a detailed tidal chart of the Ma tide off east of Korea.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.231-236
• /
• 1999

Accurate ocean surface fluxes with high resolution are critical for understanding a mechanism of global climate. However, it is difficult to derive those fluxes by using ocean observation data because the number of ocean observation data is extremely small and the distribution is inhomogeneous. On the other hand. satellite data are characterized by the high density, the high resolution and the homogeneity. Therefore, it can be considered that we obtain accurate ocean surface by using satellite data. Recently we constructed ocean surface data sets mainly using satellite data. The data set is named by Japanese Ocean Flux data sets with Use of Remote sensing Observations (J-OFURO). Here, we introduce J-OFURO. The data set includes shortwave radiation, longwave radiation, latent heat flux, sensible heat flux, and momentum flux etc. Moreover, sea surface dynamic topography data are included in the data set. Radiation data sets covers western Pacific and eastern Indian Ocean because we use a Japanese geostationally satellite (GMS) to estimate radiation fluxes. On the other hand, turbulent heat fluxes are globally estimated. The constructed data sets are used and shows the effectiveness for many scientific studies.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.2
• /
• pp.119-124
• /
• 1997

Cloud streets were successfully simulated by numerical model (RAMS) including an isolated mountain near the coast, large sensible heat flux from the sea surface, uniform stratification and wind velocity with low Froude number (0.25) in the inflow boundary. The well developed cloud streets between a pair of convective rolls are simulated at a level of 1 km over the sea. The following five results were obtained: 1) For the formation of the pair of convective rolls, both strong static instability and a topographically induced mechanical disturbance are strongly required at the same time. 2) Strong sensible heat flux from the sea surface is the main energy source of the pair of convective rolls, and the buoyancy caused by condensation in the cloud is negligibly small. 3) The pair of convective rolls is a complex of two sub-rolls. One is the outer roll, which has a large radius, but weak circulation, and the other is the inner roll, which has a small radius, but strong circulation. The outer roll gathers a large amount of moisture by convergence in the lower marine boundary, and the inner roll transfers the convergent moisture to the upper boundary layer by strong upward motion between them. 4) The pair of inner rolls form the line-shaped cloud streets, and keep them narrow along the center-line of the domain. 5) Both by non-hydrostatic and by hydrostatic assumptions, cloud streets can be simulated. In our case, non-hydrostatic processes enhanced somewhat the formation of cloud streets. The horizontal size of the topography does not seem to be restricted to within the small scale where non-hydrostatic effects are important.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1133-1140
• /
• 2002

The growth and extent of the local pressure field at any point is of primary importance as it supplies the driving force for the local wind circulation which causes a medium-range transport of air pollutants. The local pressure field is produced by the variation of temperature in the lower layers of the atmosphere, and is called the thermal wave. The thermal wave is influenced by the difference in the diurnal variations between two regions with different surface condition, for example land and sea. This difference produces the land- and sea-breeze phenomenon, and brings corresponding variations in the form of the thermal wave. Daytime temperature over the inland area (Daegu) was higher than that of the coastal area (Busan). The temperature difference reached about 5~6$^{\circ}C$ in the late afternoon(30-31 May 1999). The low pressure system of Daegu was most fully developed at the time. In this study, we investigated the possibility of thermal low onset around Daegu in summer with an analytical model. The topography effect was neglected in the model. We could predict a thermal low-pressure of about 3.4hPa at Daegu with wide flat land surface, when the inland area is about 6K warmer than the coastal area temperature. The pressure decrease is somewhat less than the observed value(4~5 hPa).