• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.634-642
• /
• 2011

A numerical analysis of steady/unsteady flow applying cavitation model and moving mesh method was carried out in order to analyze flow and response characteristics inside the pilot valve which controls the flight actuator system. The flow of the valve was assessed according to operation temperature and time. This research has found that valve characteristics became stable at above a specific temperature and the cavitation affected valve's performance. Internal pressure and response characteristics of the valve were analyzed and flow characteristics of steady and developed unsteady flow were confirmed to be matched each other.

• International Journal of Ocean System Engineering
• /
• v.3 no.4
• /
• pp.188-208
• /
• 2013

The motion response of floating structures should be adequately low to permit the operation of rigid risers along with dry well heads. Though Spar platforms have low heave responses under lower sea state, could become unacceptable in near resonance region of wave periods. Hence the hydrodynamic response, heave in particular, must be examined to ensure that it is minimized. To reduce heave motions, external damping devices are introduced and one such effective damping device is heave plate. Addition of heave plate can provide additional viscous damping and additional added mass in the heave direction which influence the heave motion. The present study focuses on the influence of heave plate on the hydrodynamic responses of Classic Spar in regular waves. The experimental investigation has been carried out on a 1:100 scale model of Spar with single and double heave plates in regular waves. Numerical investigation has been carried out to derive the hydrodynamic responses using ANSYS AQWA. The experimental results were compared with those obtained from numerical simulation and found to be in good agreement. The influence of disk diameter ratio, wave steepness, pretension in the mooring line and relative spacing between the plates on the hydrodynamic responses of Spar are evaluated and presented.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.2
• /
• pp.1-27
• /
• 1993

As the education of maritime college has a characteristics of seafaring professional institutions, the potential benefit following from the employment of seafarers would put substantial impact on it. The socio-economic position of seafaring occupations has been deteriorated considerably with changes of ship's auto-mation, specialisation and low cost operation management of shipping companies through severe internatio-nal competitions. The quality and number of applicants for the maritime college has declined and most students have no hopes for the study of seafaring subjects which followed bewildering in their college days. However, the demands for seafarers are fairly large from the viewpoint of national maritime industry. The maritime institutions should not only meet these demands but also revitalise students by reforming the educational contents. The contents should be influenced by the social approach to educational needs in particular maritime shore-oriented subjects. The maritime education is no more restricted to the sea, it covers the land based world of the maritime industry as well. The new contents will lead the maritime educated students to the shore-based occupa-tions after finishing their seafaring if they want to. This may not only make ways to the maritime educa-tion fruitable, but also the students have a zeal and hope for the subjects taught.

• Journal of Environmental Science International
• /
• v.22 no.8
• /
• pp.965-977
• /
• 2013

Reliable long-term streamflow forecasting is invaluable for water resource planning and management which allocates water supply according to the demand of water users. It is necessary to get probabilistic forecasts to establish risk-based reservoir operation policies. Probabilistic forecasts may be useful for the users who assess and manage risks according to decision-making responding forecasting results. Probabilistic forecasting of seasonal inflow to Andong dam is performed and assessed using selected predictors from sea surface temperature and 500 hPa geopotential height data. Categorical probability forecast by Piechota's method and logistic regression analysis, and probability forecast by conditional probability density function are used to forecast seasonal inflow. Kernel density function is used in categorical probability forecast by Piechota's method and probability forecast by conditional probability density function. The results of categorical probability forecasts are assessed by Brier skill score. The assessment reveals that the categorical probability forecasts are better than the reference forecasts. The results of forecasts using conditional probability density function are assessed by qualitative approach and transformed categorical probability forecasts. The assessment of the forecasts which are transformed to categorical probability forecasts shows that the results of the forecasts by conditional probability density function are much better than those of the forecasts by Piechota's method and logistic regression analysis except for winter season data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.146-152
• /
• 2017

Stabilizing the operation of dual fuel diesel engines is very important. The shipbuilding industry is rapidly growing, but gear components requiring reliability are still imported from other countries. The reasoning for this is three-fold. Firstly, it is compulsory that all ships must use devices that meet the performance standards specified in the Safety of Life at Sea (SOLAS) and the convention of MARine POLlution (MAPOL) to prevent pollution caused by ships. Secondly, most ships must comply with the ship classifications specified by ship owners. Therefore, it is specified that key engine gear components must be inspected and authorized for the quality and performance specified by the Ship Register Authority. Thirdly, it is essential that devices (engine gear) for human safety in ships comply with quality standards specified in the regulations and rules by the government. The Ship Register Authority's strict quality standards and approval requirements contribute to the reduction of motivation towards new investment and technology development by device component manufacturers. Therefore, this study aims to develop a method for using infrared thermography to examine gear reliability in order to ensure gear component reliability and national competitiveness in the global market.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.2
• /
• pp.56-66
• /
• 1995

Recently, with theraped advancement in th oceanology such an ocean-going vessel and oceanic structures, there is a need to study the cavitation erosion-corrosion control of pump impeller, the partial element of ocean machinery, for more effective operation. Especially, the cathodic protection (impressed current method & Al-sacrificial anode method) was applied to sea water, and Cu-alloy material mixed Zn & Al was used as a control method of cavitation erosion-corrosion. In this study, used the piezoelectric vibrator with 20KHz, 24.mu.m to cavity generation apparatus, and investigated the weight loss, weight loss rate, electrode potential & current density etc. under this condition. According to test result, thos describes how to indentify an influence of the cathodic protection and Al & Zn addition in material development for the control of cavitation erosion-corrosion, and those will serve as fundamental data on the cavitation erosion-corrosion control of oceanic centrifugal pump.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.504-508
• /
• 1998

A study was conducted to evaluate a protein removal characteristics by foam separation. The foam separator was operated in well-mixed tank which would be considered as a completely mixed condition. The feasibility of foam separation to remove protein from fresh and sea water was investigated. Protein removal characteristics of the foam separator were obtained by batch reactor operations. To find the effect of the operating parameter to protein removal rate, the foam separation was carried with variation of initial protein concentration and foam height. The results indicated that the protein removal efficiency was increased with increasing protein concentration and decreased with increasing foam height. The relationship between protein concentration and protein removal rate was evaluated by linear regression.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.143-149
• /
• 2009

The marine leisure activities are specially increasing among the other leisure activities due to the improving of people's life quality and formation of people's values which pursuit the various life styles with the development of economy and society and operation the system of five working days per week. Among the various marine leisure activities, skin scuba diving is the mast prevalent activity, even though it doesn't have proper legal system in relation to the safety of the activity. Thus, this paper studies the various legal issues in relation to skin scuba diving to improve the safety and activation of the activity, and identifies the problems and proposes the ways of improving it.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.1125-1131
• /
• 2005

This study is based on the assumption of surface transport linkages between Korea and China. Active economic cooperation between South Korea and North Korea are expected within the near future and Russia and China have interested in the land transport linkages in Korean peninsula. How much freight demands between the two countries that has been mainly dependent on air and sea transportation so far may convert the transport mode to surface transportation are estimated. Particularly, freight demands between South Korea and China's three northeast provinces are focused. The sensitivity analysis depends on transport time and transport cost changes is included. The modal shifts is estimated to be more sensitive to the changes in transport costs than those in transport time, suggesting the importance of transport costs of rail and road. Despite the dearth of data on the surface transport operation in North Korea, the attempts made in this study to estimate the demand conversion are hope to provide reference points for potential effects of the rail and road transport connections between China and the Korea peninsula before our discussions expand to the establishment of freight transport network of the northest Asia and, moreover, the Eurasian continent.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.528-535
• /
• 2016

The vibration of a ship gives a significant effect on the noise radiated into the water. This paper focused on the vibration of ship hull due to the sub-generator located on the deck in the anchored condition. The contributions of the transfer paths between sub-generator and ship hull were analyzed using the TPA and the OTPA method. While the sub-generator was operation and the main engine was turned off, the vibrations were measured simultaneously at the 38 locations of the ship and the one hydrophone was arranged to measure the underwater radiated noise at the overside ship. The results of the transfer path by applying TPA and OTPA were compared and discussed. As a result of these methods, the top of stovepipe and valve are contributive. Reinforcing these structures is the most effective to reduce the vibration of ship hull.