• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.581-586
• /
• 2013

The sea traffic volume in Southwest sea including Wando area have increased every year. However the improvement of the facilities for convenience and safety in port and sea was not enough to meet the increasing demand of traffic and passengers' need. This study dealt with the situations and status of passenger ship traffic system in Wando area. In addition to, questionnaire survey of passenger ship user in Wando area was carried out in order to research the improvement of marine traffic system. On the basis of the result, navigation risks in the area was analysed. The institutional system such as passenger ship fare, enhanced traffic system that can improve marine traffic environment in the area were suggested and examined. The urgent issue was the scattered fishing ground near fairway which makes narrow passage and can cause risky passeger ship's navigation. In the side of passeger ship's operation, the wage of cargo handling was relatively expensive that needed to be improved.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.64-70
• /
• 2023

Maritime transport is dominant in the overall volume of all international transportation. Existence and overcoming of problems, which cause pressure on shipping safety, remain actual and fully concern both maritime and inland transport. Increasing speed and cargo capacity of the ships along with the reduction of crew members lead to the automation of a growing number of work processes, which indicates the need to actively introduce appropriate measures in the security system of sea-going ships and commercial ports and to develop modern approaches to minimize negative events and incidents in the process of ship operation. Advantages in use of modern methods of monitoring the safety of ship operations, management of possible events and incidents, including investigation of accidents, first, aimed at prevention of negative occurrences and ways of prevention on this basis. Considering statistics on incidents increase, this work presents analysis of general ship accident rate, study of major accidental events growth annually, and investigation of causes of incidents, which most frequently occur in port waters and at open sea. A survey of current approaches to ensuring the safety of shipping by implementing effective tools, such as event and incident management, has been conducted.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.19-21
• /
• 2017

Ship maneuvering performance is usually estimated in calm water conditions which provide valuable information about the ship maneuvering characteristics at the early design stage. However, the course-keeping ability and the maneuvering performance of a ship can be significantly affected by the presence of waves when ship maneuvers in real sea condition. Therefore, it is necessary to understand the maneuvering behavior of a ship in waves in the viewpoint of ship safety in the design stage. In this study, the force and yaw moment acting on a moving ship in regular waves with different wave length and wave direction will be performed in the square wave tank in Changwon National University. The results of this study can be used to help a person to design a ship hull with the best ship maneuverability in waves and disseminate knowledge on predicting ship maneuvering in regular waves in various wave directions.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.227-235
• /
• 2011

Ship handling simulator should have capabilities of calculating ship motions (heave, pitch, and roll) at given sea state and displaying the calculated motions through a real-time 3D visualization system. Motion solver of a ship handling simulator generally calculates those motions in addition to position for an own ship, a main simulation target, but provides only position information for traffic ships. Therefore, it is required to simulate real-time traffic ship and buoy motions coupled with ocean waves in a ship handling simulator for the realistic visualization. In the paper, the authors propose a simple dynamics model by which ship and buoy motions are calculated with the input data of wave height and discuss a method for the implementation of a ship and buoy motions calculation module.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.10-18
• /
• 2022

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.800-808
• /
• 2022

The International Maritime Organization adopted the interim standards for ship maneuverability in November 1993 for preventing collision of ships at sea and for protecting the marine environment, and based on the accumulated data, in December 2002, the established standards for ship maneuverability were adopted. However, the standards adopted are those at full load, even keel, and at least 90 % of the ship speed at 85 % of the ship's maximum power. Moreover, these standards have limitations in providing information on maneuverability under actual navigational conditions. Therefore, in this study, frequency analysis AHP analysis techniques were studied by consulting navigational officers, captains, and experts, who have significant knowledge on ship maneuverability, utilization of the current standards, and the information necessary for the operation of the actual ship. The results of this study confirmed that the necessary information on maneuverability for the navigational officer operating the vessel is information about the turning circle at a small angle of 5°-10° and z-test information at maneuvering speed, not sea speed. Additionally, in relation to speed control, additional information on deceleration inertia and acceleration inertia is needed than the information on the stopping ability at sea speed and full loaded condition. The derived results are considered to be useful as basic data for preparing guidelines for ship maneuverability necessary for navigational of icers who operate ships.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.641-649
• /
• 2021

Fuel oil consumption (FOC) must be minimized to determine the economic route of a ship; hence, the ship power must be predicted prior to route planning. For this purpose, a numerical method using test results of a model has been widely used. However, predicting ship power using this method is challenging owing to the uncertainty of the model test. An onboard test should be conducted to solve this problem; however, it requires considerable resources and time. Therefore, in this study, a deep feed-forward neural network (DFN) is used to predict ship power using deep learning methods that involve data pattern recognition. To use data in the DFN, the input data and a label (output of prediction) should be configured. In this study, the input data are configured using ocean environmental data (wave height, wave period, wave direction, wind speed, wind direction, and sea surface temperature) and the ship's operational data (draft, speed, and heading). The ship power is selected as the label. In addition, various treatments have been used to improve the prediction accuracy. First, ocean environmental data related to wind and waves are preprocessed using values relative to the ship's velocity. Second, the structure of the DFN is changed based on the characteristics of the input data. Third, the prediction accuracy is analyzed using a combination comprising five hyperparameters (number of hidden layers, number of hidden nodes, learning rate, dropout, and gradient optimizer). Finally, k-means clustering is performed to analyze the effect of the sea state and ship operational status by categorizing it into several models. The performances of various prediction models are compared and analyzed using the DFN in this study.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.55-61
• /
• 2011

A field trial in an ice-covered sea is one of the most important tasks in the design of icebreaking ships and offshore structures. To correctly estimate the ice load and ice resistance of a ship's hull, it is essential to understand the material properties of sea ice during ice field trials and to use the proper experimental procedure for gathering effective ice data. The first Korean-made icebreaking research vessel, "ARAON," had her second sea ice trial in the Arctic Ocean during the summer season of 2010. This paper describes the test procedures used to obtain proper sea ice data, which provides the basic information for the ship's performance in an ice-covered sea and is used to estimate the correct ice load and ice resistance of the IBRV ARAON. The data gathered from the sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes the temperature, density, and salinity of the sea ice, which was believed to be from two-year old ice floes. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.773-779
• /
• 2011

The width of a submarine's turbulent wake, using Shear-free and Ship wake theory, is proportional to $x^n,\;({\frac{1}{5}}{\leq}n<{\frac{1}{2}})$ If we assume submarine's length, width, velocity are 65m, 6.5m, 6kts respectively, and the minimum diffusion of turbulent wake ; ${\infty}\;x^{1/5}$, the width of wake behind the submarine is about 20m at 1.2km, 30m at 15km when there is no breaking waves on the sea surface. However, in the case of breaking waves, it is very limited to identify submarine's wake on the sea surface because wind generated turbulent wake has higher turbulent kinetic energy than that of submarine's wake. As a result, there is a high possibility to detect submarine's wake on the sea surface in the shallow water such as the Yellow-Sea using a proper detection method such as SAR. This means that in anti-submarine operations, non-acoustic sea surface serveillance applied turbulent wake will be very effective way to detect a submarine in near future. To do this we have to develop exact theory of submarine's turbulent wake above all.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2017

The purpose of this study was to identify the effects of a hands-on training regarding maritime safety including abandon ship and fire-fighting as related to sea survival, fire-fighting knowledge and emergency response leadership in seafarers engaged on a seagoing ship. The study was conducted with a nonequivalent control group pre-posttest design. Two hundred-sixty-six participants were assigned to either the experimental group(128) or control group(138). The hands-on training regarding maritime safety included sea survival and fire fighting drill, and it was implemented with the experimental group for two days from July 1, 2015 to June 30, 2016. Data was analyzed using chi-square, t-test and ANCOVA by using IBM SPSS Statistics(version 24) program. The experimental group who had the hands-on training showed significantly higher sea survival knowledge(F=902.32, p<.001), shipboard fire-fighting knowledge(F=1013.76, p<.001) and emergency response leadership(F=1802.62, p<.001) for maritime safety compared with the control group who had traditional education. The results indicate that a hands-on training is an effective teaching method to improve sea survival, fire-fighting knowledge and emergency response leadership in seafarers engaged. Further study is needed to identify the effect of a hands-on training regarding maritime safety according to the environmental changes of seafarers.