• Title/Summary/Keyword: Sea&Air

Search Result 1,164, Processing Time 0.031 seconds

Quality Properties of Seasoned-Dried Pacific Saury Treated with Liquid Smoke -2. Processing Conditions for Seasoned-Dried Pacific Saury Treated with Liquid Smoke-

  • Cha Yong-Jun;Park Sung-Young;Jeong Eun-Jeong;Chung Yeon-Jung;Kim So-Jung
    • Fisheries and Aquatic Sciences
    • /
    • v.4 no.4
    • /
    • pp.238-245
    • /
    • 2001
  • Optimal conditions for processing. of seasoned-dried Pacific saury treated with liquid smoke (T2) were evaluated by physicochemical and microbial experiments and sensory evaluation, comparing with control (seasoning only, C) and treatment I $(0.05\%\;Rosemary\;instead\;of\;liquid\;smoke,\;Tl)$. Two hrs of seasoning time was set, and 23 hrs of drying time was determined in all samples. Finally, T2 product was made by soaking treatments (three times of 1 sec, 8 sec and 1 sec) in $5\%$ (v/v) liquid smoke (Scansmoke PB 2110) after 30 min, 4 hrs and 22 hrs of hot-air drying, respectively. The histamine contents in 3 seasoned-dried products were in a 15.33-26.99 mg/l00g range. The water activities of 3 seasoned-dried products were 0.719-0.735 range, and the pH of T2 was lower than the others. In the comparison of POV and TBA values among products, the TBA values and POV of Tl and T2 were significantly low compared to C, and also the viable cell counts of T2 was relatively lower than those of the others. In the color values, significant changes were not found among products, and in the sensory evaluation for odor, taste and overall acceptance, T2 had relatively higher preference on the whole items.

  • PDF

Source Identification of Ambient Size-by-Size Particulate Using the Positive Matrix Factorization Model on the Border of Yongin and Suwon (PMF 모델을 이용한 용인-수원경계지역에서의 부유분진의 크기별 오염원 확인)

  • Oh, Mi-Seok;Lee, Tae-Jung;Kim, Dong-Sool
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.25 no.2
    • /
    • pp.108-121
    • /
    • 2009
  • The suspended particulate matters have been collected on membrane filters and glass fiber filters by an 8-stage cascade impactor for 2 years (Sep. 2005${\sim}$Sep. 2007) in Kyung Hee University-Global Campus located on the border of Yongin and Suwon. The 20 chemical species (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, $Na^+$, ${NH_4}^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were analyzed by an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on these chemical information, the PMF receptor model was applied to identify the source of ambient size-by-size particulate matters. The receptor modeling is the one of the statistical methods to achieve resonable air pollution management strategies. A total of 10 sources was identified in 9 size-ranges such as long-range transport, secondary aerosol, $NH_{4}NO_{3}$ related source, coal combustion, sea-salt, soil, oil combustion, auto emission, incineration, and biomass burning. Especially, the secondary aerosol source assorted in fine and coarse modes was intensively studied.

Sintered-reaction Bonded Silicon Nitride Densified by a Gas Pressure Sintering Process - Effects of Rare Earth Oxide Sintering Additives

  • Lee, Sea-Hoon;Ko, Jae-Woong;Park, Young-Jo;Kim, Hai-Doo;Lin, Hua-Tay;Becher, Paul
    • Journal of the Korean Ceramic Society
    • /
    • v.49 no.4
    • /
    • pp.318-324
    • /
    • 2012
  • Reaction-bonded silicon nitrides containing rare-earth oxide sintering additives were densified by gas pressure sintering. The sintering behavior, microstructure and mechanical properties of the resultant specimens were analyzed. For that purpose, $Lu_2O_3-SiO_2$ (US), $La_2O_3$-MgO (AM) and $Y_2O_3-Al_2O_3$ (YA) additive systems were selected. Among the tested compositions, densification of silicon nitride occurred at the lowest temperature when using the $La_2O_3$-MgO system. Since the $Lu_2O_3-SiO_2$ system has the highest melting temperature, full densification could not be achieved after sintering at $1950^{\circ}C$. However, the system had a reasonably high bending strength of 527 MPa at $1200^{\circ}C$ in air and a high fracture toughness of 9.2 $MPa{\cdot}m^{1/2}$. The $Y_2O_3-Al_2O_3$ system had the highest room temperature bending strength of 1.2 GPa.

TIPEX (Tropical Indo-Pacific water transport and ecosystem monitoring EXperiment) Program (태평양-인도양 해양순환 연구 프로그램)

  • Jeon, Dongchull;Kim, Eung;Shin, Chang Woong;Kim, Cheol-Ho;Kug, Jong Seong;Lee, Jae Hak;Lee, Youn-Ho;Kim, Suk Hyun
    • Ocean and Polar Research
    • /
    • v.35 no.3
    • /
    • pp.259-272
    • /
    • 2013
  • One of the factors influencing the climate around Korea is the oceanic-atmospheric variability in the tropical region between the eastern Indian and the western Pacific Oceans. Lack of knowledge about the air-sea interaction in the tropical Indo-Pacific region continues to make it problematic forecasting the ocean climate in the East Asia. The 'Tropical Indo-Pacific water transport and ecosystem monitoring EXperiment (TIPEX)' is a program for monitoring the ocean circulation variability between Pacific and Indian Oceans and for improving the accuracy of future climate forecasting. The main goal of the TIPEX program is to quantify the climate and ocean circulation change between the Indian and the Pacific Oceans. The contents of the program are 1) to observe the mixing process of different water masses and water transport in the eastern Indian and the western Pacific, 2) to understand the large-scale oceanic-climatic variation including El Nino-Southern Oscillation (ENSO)/Warm Pool/Pacific Decadal Oscillation (PDO)/Indian Ocean Dipole (IOD), and 3) to monitor the biogeochemical processes, material flux, and biological changes due to the climate change. In order to effectively carry out the monitoring program, close international cooperation and the proper co-work sharing of tasks between China, Japan, Indonesia, and India as well as USA is required.

A Analysis of Freight Volume and Freight Truck Flows for Efficient Urban Goods Movement at Incheon City (인천시의 효율적인 도시물류정비를 위한 화물물동량 및 화물차의 유동특성분석)

  • Yun, Jeong Mi;Park, Sang Chul
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.8 no.2
    • /
    • pp.166-174
    • /
    • 2005
  • Plan of Logistics facility and Management of Freight trucks need for Efficient Improvement of Urban Goods Movement. For this, it need to clear flow pattern of Freight volumes and Freight trucks on urban space. Therefor, The purpose of this study is to clear space flow pattern of Freight volumes and Freight trucks as base data for Plan of Urban Goods Movement on Incheon city. Incheon city is selected because it is at sea & air ports and carries out various Activity of Urban Goods Movement. As the result of this study, it understands and analyzes Characteristic on flow pattern of Freight volumes and Freight trucks. Through this study, we'll expect that this results could be contributed in the understand of actual conditions of Freight volume and freight trucks and the basic data for Improvement of urban goods movement and the management policy of freight trucks in urban goods movement.

  • PDF

Composition of Size-Segregated Atmospheric Aerosol Collected at an Urban Roadside Environment in Jeju Area (제주지역 도로변 대기 중 에어로졸의 입경별 조성특성)

  • Hu, Chul-Goo;Kim, Su-Mi;Lee, Ki-Ho
    • Journal of Environmental Science International
    • /
    • v.29 no.1
    • /
    • pp.79-93
    • /
    • 2020
  • To determine the size distributions of water-soluble inorganic ionic species (WSIS) in roadside aerosols, sampling experiments were carried out in the urban roadside area of Jeju City on August 2018 and January 2019 by using the eight-stage cascade impactor sampler. The mass of roadside aerosols were partitioned at 57% in fine fraction, 36-37% in coarse fraction, and 6-7% in giant fraction, regardless of summer and winter. The mass concentrations of WSIS except for Na+ and SO42- in roadside aerosols were higher in winter than in summer. The size distributions of Na+, Mg2+, Ca2+ and Cl- were characterized by bimodal types with coarse particle mode peaking around 3.3-4.7 ㎛ and 5.8-9.0 ㎛. The size distributions of NO3- and K+ shifted from a single fine mode peaking around 0.7-1.1 ㎛ in winter to bimodal and/or trimodal types with peaks around coarse mode in summer. SO42- and NH4+ showed a single fine mode peaking around 0.7-1.1 ㎛. The MMAD of roadside aerosols was lower than that of Na+, Mg2+, Ca2+ and Cl-. Based on the marine enrichment factors and the ratio values of WSIS and the corresponding value for sea water, the composition of roadside aerosols in Jeju City may be practically affected by terrestrial sources rather than marine source.

Development of Prediction Program for the Towing Condition Associated with Various Towing Operations of a Disabled Ship (사고선박의 다양한 예인계획에 따른 예인상태 추정 프로그램 개발)

  • Kim, Eun-Chan;Choi, Hyuek-Jin;Lee, Seung-Guk
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.17 no.4
    • /
    • pp.318-323
    • /
    • 2014
  • When a disabled ship is being towed in a seaway, the speed and direction of the towed ship are estimated by using the towing force and direction of the selected tug boats at the predicted sea conditions including the wind and currents. In this paper, prediction method at the towing conditions of the various towing operations for a disabled ship are studied. The proposed calculation method suggests firstly the method to import the speed and resistance of the forward direction of the towed ship calculated by the existing computer program, second, the method to calculate the speed and resistance of the towed direction of the towed ship acquired from the selected tug boats at the initial towing conditions and lastly, the method to calculate the speed and resistance of the towed direction for the towed ship at the stable towing conditions. These calculation methods have been applied to the computer program and this program has been approved to be a useful program, capable of appropriately predicting the towed ship's conditions.

A study on an intermittent aeration membrane bioreactor system using ammonia sensor to decrease energy consumption and sludge concentration by tubular membrane (암모니아 센서를 이용한 간헐폭기 Membrane bioreactor공정에서의 전력비 저감과 관형막을 이용한 슬러지 농축에 관한 연구)

  • Kang, Heeseok;Lee, Euijong;Kim, Hyungsoo;Jang, Am
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.28 no.2
    • /
    • pp.161-170
    • /
    • 2014
  • It is essential to decrease energy consumption and excess sludge to economically operate sewage treatment plant. This becomes more important along with a ban on sea dumping and exhaustion of resource. Therefore, many researchers have been study on energy consumption reduction and strategies for minimization of excess sludge production from the activated sludge process. The aeration cost account for a high proportion of maintenance cost because sufficient air is necessary to keep nitrifying bacteria activity of which the oxygen affinity is inferior to that of heterotrophic bacteria. Also, additional costs are incurred to stabilize excess sludge and decrease the volume of sludge. There were anoxic, aerobic, membrane, deairation and concentration zone in this MBR process. Continuous aeration was provided to prevent membrane fouling in membrane zone and intermittent aeration was provided in aerobic zone through ammonia sensor. So, there was the minimum oxygen to remove $NH_4-N$ below limited quantity that could be eliminated in membrane zone. As the result of this control, energy consumption of aeration system declined by between 10.4 % and 19.1 %. Besides, we could maintain high MLSS concentration in concentration zone and this induced the microorganisms to be in starved condition. Consequentially, the amount of excess sludge decrease by about 15 %.

An experimental study on the low temperature melting treatment of waste asbestos for using (폐석면의 활용을 위한 저온 용융처리에 대한 실험적 연구)

  • Song, Tae Hyeob;Kim, Young Hun;Park, Ji Sun;Lee, Sea Hyun
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.2
    • /
    • pp.83-90
    • /
    • 2010
  • As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

  • PDF

This paper asks whether the Republic of Korea (ROK) Navy should Study on ROK Navy's Strategy Planning - Concerning to JOAC, ASB Concept of US Armed Forces - (한국 해군의 전략 수립 방향 연구 - 미군의 JOAC, ASB 개념 분석과 한국 해군에의 함의-)

  • Na, Sung-Min
    • Strategy21
    • /
    • s.32
    • /
    • pp.5-35
    • /
    • 2013
  • The purpose of this thesis is to suggest how to plan ROK(Republic of Korea) Navy's strategy concerning to JOAC(Joint Operation Access Concept) and ASB(Air-Sea Battle) concept of US(United States) armed forces. Since 2006, US armed forces has been developing CONOPS(Concepts of Operations), JOAC & ASB. These concepts will not only affect security environment for Korea Peninsula and West Pacific Area, but also will be affected to ROK Navy's Strategy. Therefore, Korea Navy has to consider and review those concepts and should discuss the way to secure peace of Korea Peninsula. JOAC & ASB have been developed for securing operational access ability of US armed forces against enemy forces. A2/AD(Anti-Access, Area-Denial) is the strategy of possible enemy forces against US forces' approaching into the operation area and impede operations within area. US forces had to overcome enemy's A2/AD strategy in coming century to protect national interest and sustain global leadership. The main concept of JOAC & ASB is "Cross-domain Synergy", which means 'to eliminate duplicate and improve joint operability containing space and cyber operation area.' Korea Navy's acceptance of JOAC & ASB without any revising is not a rational choice. Without the amendment some problems can be occurred by the Korea navy's acceptance for the original version of JOAC & ASB. Those are "Missing differences of operation environment between Korea and US", "Impediment from neighbor nations, especially PRC (People's Republic of China)", and "Impediment inside from Korea armed forces". Therefore, Korea Navy has to evaluate and find out the way to solve for JOAC & ASB to apply for their strategy and minimise those possible problems above. This thesis is expected to be the solution.

  • PDF