• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.805-808
• /
• 2010

본 연구에서는 CdTe 및 $CuInSe_2$ 태양전지의 광투과층으로 사용되는 CdS 박막을 chemical bath deposition으로 제조하고, 반응용액의 온도에 따른 미세구조의 변화를 조사하였다. CdS 박막의 결정구조와 미세구조는 기판의 종류에 큰 변화 없이 $85^{\circ}C$ 까지는 반응용액의 온도가 증가함에 따라 기판에서의 ion-by-ion 성장이 촉진되어 CdS 박막의 성장률이 증가하며, 결정성이 향상되고 continuous하면서 매우 조밀한 미세구조를 가졌다. 그러나 온도가 $55^{\circ}C$ 이하의 경우 CdS 형성에 필요한 Cd2+ 이온의 공급이 느려져 온도에 따라 증착률이 감소하였다. 또한 핵생성 위치 수가 감소하여 입자의 크기가 증가하였고, 박막 내부에는 void가 형성되어 균일하지 못한 미세구조를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.675-675
• /
• 2013

CIGS thin films have received a great attention as a promising material for solar cells due to their high absorption coefficient, appropriate bandgap, long-term stability, and low cost production. CIGS thin films have been deposited by various methods such as co-evaporation, sputtering, spray pyrolysis and electro-deposition. In this study, Cu(In,Ga)Se2(CIGS) thin films were prepared using a single quaternary target by rf magnetron sputtering. The effect of sulfurization on the structural, compositional and electrical properties of the films was examined in order to develop the deposition process. An optimal sulfurization process will be selected for the preparation of CIGS thin films with good structural, optical and electrical properties by applying various sulfurization processes. In addition, the electrical properties of CIGS thin films were investigated by post-deposition annealing process. The carrier concentration of CIG(SSe) thin films after sulfurization was increased from $10^{14}cm^{-3}$ to $10^{16}cm^{-3}$ and the resistivity was increased from 10 ${\Omega}cm$ to $10^3$ ${\Omega}cm$. It is confirmed that CIG(SSe) thin films prepared at optimal deposition condition have similar atomic ratio to the target value after sulfurization.

• 대한전기학회논문지
• /
• 제31권11호
• /
• pp.141-145
• /
• 1982

Optical absorption properties of an orphous Se film due to interband electronic transitions are observed in the visible range by varying the folm thickness. Amorphous Se films were prepared by evaporation method. As the experimental results, it is found that optical energy gap is around 2.07(e V), and the optical constants depend on the film thickness, evaporation-deposition conditions, and incident photon energy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.274-274
• /
• 2013

We fabricate encapsulation-layer of OLED panel from organic-inorganic hybrid thin film by atomic layer deposition (ALD) molecular layer deposition (MLD) using Al2O3 as ALD process and Adipoyl Chloride (AC) and 1,4-Butanediamine as MLD process. Ellipsometry was employed to verify self-limiting reaction of MLD. Linear relationship between number of cycle and thickness was obtained. By such investigation, we found that desirable organic thin film fabrication is possible by MLD surface reaction in monolayer scale. Purging was carried out after dosing of each precursor to eliminate physically adsorbed precursor with surface. We also confirmed roughness of the organic thin film by atomic force microscopy (AFM). We deposit AC and 1,4-Butanediamine at $70^{\circ}C$ and investigated surface roughness as a function of increasing thickness of organic thin film. We confirmed precursor's functional group by IR spectrum. We calculated WVTR of organic-inorganic hybrid super-lattice epitaxial layer using Ca test. WVTR indicates super-lattice film can be possibly use as encapsulation in flexible devices.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2695-2697
• /
• 2010

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 추계총회 및 학술발표회
• /
• pp.37-37
• /
• 2003

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.85-85
• /
• 2002

• 센서학회지
• /
• 제2권1호
• /
• pp.81-86
• /
• 1993

Chemical bath deposition 방법으로 다결정 CdSe 박막을 세라믹 기판 위에 성장시킨 다음 온도를 변화시켜 열처리하고 X-선 회절무늬를 측정하여 결정구조를 밝혔다. $450^{\circ}C$로 열처리한 시료가 X-선 회절무늬로 부터 외삽법에 의해 $a_{o}$와 $c_{o}$는 각각 $4.302{\AA}$과 $7.014{\AA}$인 육방정계임을 알았다. 이 때 낱알크기는 약 $0.3{\mu}m$이었다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자 농도와 이동도의 온도의존성을 연구하였다. 이동도는 33 K에서 200 K까지는 압전산란에 의하여, 200K에서 293 K까지는 극성광학산란에 의하여 감소하는 경향을 나타냈다. 광전도 셀의 특성으로 스텍트럼 응답, 감도(${\gamma}$), 최대허용소비전력 및 응답 시간을 측정하였다.

• Current Photovoltaic Research
• /
• 제3권4호
• /
• pp.130-134
• /
• 2015

The high efficiency cell research processes through the KF post deposition treatment (PDT) of the $Cu(In,Ga)Se_2(CIGS)$ thin film has been very actively progress. In this study, it CIGS thin film deposition process when KF PDT 300 to the processing temperature, 350, $400^{\circ}C$ changed to soda-lime glass (SLG) efficiency of the CIGS thin film characteristics, and solar cell according to Na presence of diffusion from the substrate the effects were analyzed. As a result, the lower the temperature of KF PDT and serves to interrupt the flow of current K-CIGS layer is not removed from the reaction surface, FF and photocurrent is decreased significantly. Blocking of the Na diffusion from the glass substrate is significantly increased while the optical voltage, photocurrent and FF is a low temperature (300, $350^{\circ}C$) in the greatly reduced, and in $400^{\circ}C$ tend to reduce fine. It is the presence of Na in CIGS thin film by electron-induced degradation of the microstructure of CIGS thin film is expected to have a significant impact on increasing the hole recombination rate a reaction layer is formed of the K elements in the CIGS thin film surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.158-158
• /
• 2011

$Cu(In_xGa_{1-x})Se_2$ (CIGS) thin film solar cell is one of the most promising solar cells in photovoltaic devices. CIGS has a direct band gap which varied from 1.0 to 1.26 eV, depending on the Ga to In ratio. Also, CIGS has been studying for an absorber in thin film solar cells due to their highest absorption coefficient which is $1{\times}10^5cm^{-1}$ and good stability for deposition process at high temperature of $450{\sim}590^{\circ}C$. Currently, the highest efficiency of CIGS thin film solar cell is approximately 20.3%, which is closely approaching to the efficiency of poly-silicon solar cell. The deposition technique is one of the most important points in preparing CIGS thin film solar cells. Among the various deposition techniques, the sputtering is known to be very effective and feasible process for mass production. In this study, CIGS thin films have been prepared by rf magnetron sputtering method using a single target. The optical and structural properties of CIGS films are generally dependent on deposition parameters. Therefore, we will explore the influence of deposition power on the properties of CIGS films and the films will be deposited by rf magnetron sputtering using CIGS single target on Mo coated soda lime glass at $500^{\circ}C$. The thickness of CIGS films will be measured by Tencor-P1 profiler. The optical properties will be measured by UV-visible spectroscopy. The crystal structure will be analyzed using X-ray diffraction (XRD). Finally the optimal deposition conditions for CIGS thin films will be developed.