중수로형 핵연료 제조공정 중 연료봉 피복관에 간격체와 지지체 등의 부착물이 브레이징으로 접합된다. 본 연구에서는 베릴륨을 물리 증착법(PVD)으로 접합될 부착물의 표면에 증착한 것과 비정질 용가재[$Zr_{1-x}Be_{x}(0.3{\le}x{\le}0.5)$]를 사용하여 브레이징된 접합부의 미세조직과 경도 등의 특성을 비교하고 브레이징 온도가 접합부에 미치는 영향 조사하였다. 비정질 용가재에 의한 접합층의 두께는 PVD-Be의 경우와 비교하여 더 얇았고, Be 함량이 감소할수록 접합층의 두께는 감소하였으며 모재의 침식은 거의 없었다. PVD-Be의 경우 공정 반응, 액상 출현, 모세관 현상과 확산으로 브레이징 되나 비정질 합금은 용가재 만이 용융되어 액상 접합되는 것으로 사료된다. PVD-Be 접합부의 미세조직은 계면에서 수지상이 형성되어 내부로 성장하나, 비정질 합금에 의한 접합부는 석출된 제2상들이 구상으로 구성되며 브레이징 온도가 증가할수록 구상은 더욱 커졌다. 비정질 합금 접합부의 경도는 Be 함량이 감소할수록 경도는 증가하였다. 본 연구에 사용된 비정질 합금 중 $Zr_{0.7}Be_{0.3}$ 합금은 접합부에서 Be의 모재로의 확산이 적어 부드러운 계면과 모재의 침식이 없었고 높은 경도 때문에 핵연료 피복재 접합에 가장 적합한 용가재로 사료된다.
중적외선 영역은 장애물에 의해서 파장의 흡수가 거의 일어나지 않기 때문에 적외선 소자에서 널리 이용되고 있다. 현재 대부분의 중적외선 소자에는 HgCdTe (MCT)가 사용되고 있지만, 3성분계 화합물이 가지는 여러 문제를 가지고 있다. 반면에, 2성분계 화합물인 인듐안티모나이드 (InSb)는 중적외선 영역 ($3-5\;{\mu}m$) 파장 대에서 HgCdTe와 대등한 소자 특성을 나타냄과 동시에 낮은 기판 가격, 소자 제작의 용이성, 그리고 야전과 우주 공간에서 소자 동작의 안정성 때문에 HgCdTe를 대체할 물질로 주목을 받고 있다. InSb는 미국과 이스라엘과 같은 일부 선진국을 중심으로 연구가 되었지만, 국방 분야의 중요한 소자로 인식되었기 때문에 소자 제작에 관한 기술적인 내용은 국내에 많이 알려지지 않은 상태이다. 따라서 본 연구에서는 InSb 소자 제작의 기초연구로 절연막과 pn 접합 형성에 대한 연구를 수행하였다. 절연막의 특성을 알아보기 위해, InSb 기판위에 $SiO_2$와 $Si_3N_4$를 PECVD (Plasma Enhanced Chemical Vapor Deposition)로 증착을 하였다. 절연막의 계면 트랩 밀도는 77K에서 C-V (Capacitance-Voltage) 분석을 통하여 계산하였으며, Terman method 방법을 이용하였다.[1] $SiO_2$는 $120-200^{\circ}C$의 온도 영역에서 계면 트랩 밀도가 $4-5\;{\times}\;10^{11}cm^{-2}$범위를 가진 반면, $240^{\circ}C$의 경우 계면 트랩 밀도가 $21\;{\times}\;10^{11}cm^{-2}$로 크게 증가하였다. $Si_3N_4$는 $SiO_2$ 절연막에 비해서 3배 정도의 높은 계면 트랩 밀도 값을 나타내었으며. Remote PECVD 장비를 이용하여 $Si_3N_4$ 절연막에 관한 연구를 추가적으로 진행하여 $7-9\;{\times}\;10^{11}cm^{-2}$ 정도의 계면 트랩 밀도 값을 구할 수가 있었다. 따라서 InSb에 대한 절연막은 $200^{\circ}C$ 이하에서 증착된 $SiO_2$와 Remote PECVD로 증착 된 $Si_3N_4$가 적합하다고 할 수 있다. 절연막 연구와 더불어 InSb 소자의 pn 접합 연구를 진행하였다. n-InSb (100) 기판 ($n\;=\;0.2-0.85\;{\times}\;10^{15}cm^{-3}$ @77K)에 $Be^+$이온 주입하여 p층을 형성하여 제작 되었으며, 열처리 조건에 따른 소자의 특성을 관찰 하였다. $450^{\circ}C$에서 30초 동안 RTA (Rapid Thermal Annealing)공정을 진행한 샘플은 -0.1 V에서 $50\;{\mu}A$의 높은 암전류가 관찰되었으며, 열처리 조건을 60, 120, 180초로 변화하면서 소자의 특성 변화를 관찰하였다.
MPECVD법을 이용하여 다이아몬드 박막을 p형 Si(100)기판 위에 증착하였다. 증착하기에 앞서, 핵생성 밀도를 향상시키기 위하여 40-$60\mu$m 크기의 다이아몬드 분말을 사용하여 6분간 초음파 전처리를 행하였다. 이런 전처리 과정 후, 다이아몬드 박막을 $^900{\circ}C$, 40Torr, 1000W microwave power에서 ${CH}_{4}$와 ${H}_{2}$사용하여 증착하였다. 이렇게 형성된 다이아몬드 박막의 순수도는 Raman spectroscopy로 측정하였으며 박막의 표면은 SEM으로 , 그리고 미세구조와 미세결함은 TEM으로 조사하였다. 반응기체 중 CH4의 농도가 증가함에 따라 다이아몬드의 정형적인 Raman peak와 더불어 다이아몬드가 아닌 제 2상의 peak가 증가하였다. SEM에 의한 박막의 표면은 ${CH}_{4}$가 증가함에 따라 박막의 표면이 뚜렷한 결정형상에서 cauliflower 형태로 변화하였다. 다이아몬드 박막의 결함밀도는 ${CH}_{4}$농도가 증가함에 따라 증가하였으며 결함 중 대부분은 {111}twin이였다. 그리고 MTP(Mulitply Twinned Particle)는 5개의 (111)면으로 형성된 결정으로, 5개의 (111)면은 각각에 대해서 Twin되어 있으며 five-fold symmetry를 나타내었다. 계면에서는 다이아몬드내의 결함들이 핵생성 site를 함유한 작은 지역에서부터 V형재로 퍼져 나갔다.
In order to evaluate the taxonomical relevance of seeds morphological characteristics, a macroand micro-morphological study was conducted on seeds of Korean Vicia (Fabacea). We collected 19 taxa of genus Vicia distributed in Korea and introduced one taxa from USDA. The morphological characteristic and testa texture of seeds were investigated using a Stereo-microscope (SM) and Scanning Electron Microscope (SEM). Most of Vicia seeds were found spherical or oblong and some seeds were oval and subglose. The largest seed was V. chosenensis ($4.3{\times}3.6{\times}2.6mm$), and the smallest was V. teterasperma ($1.7{\times}1.7{\times}1.5mm$). V. chosenensis and V. hirsuta were separated from other Vicia species by having a shiny in seed finish. In hilum shape, 14 species have linear and V. sepium was distinguished by having a circumlinear. In testa texture, they developed papilae, only V. hirsuta has lophate in level type. Deposition of the sheet-like debris between the papilae was observed in V. chosenensis, V. cracca, and V. unijuga. Polymorphism information content (PIC) values of the 13 qualitative morphological characters (QMC) were in the range of 0.0950 to 8863 with an average of 0.4611. PIC value of seed shape, seed colour, hilum colour were 0.7403, 0.8177, 0.883 respectively. Cluster analysis based on QMC detected three main clades. V. cracca, V. amurensis, V. amoena were involved in Group 1 and V. unijuga f. minor, V. unijuga, V. unijuga f. angustifolia, V. sepium, V. hirticalycina, V. hirsuta, V. linearfolia, V. chosenensis, V. pseudorobus, V. venosa var. cuspidata were involved in Group 2. V. nipponica, V. japonica, V. villosa, V. dasicarpa, V. bungei, V. angustifolia, V. tetrasperma were clustered in Group 3. Our research suggests that morphological characteristic and testa texture of seeds could be used as definers for the identification of genus Vicia.
Background: Secretory leukocyte protease inhibitor (SLPI) protects tissues from proteases and promotes cell proliferation and healing. SLPI also reduces periodontal inflammation and alveolar bone resorption by inhibiting proinflammatory cytokine expression in rat periodontal tissues and osteoblasts. However, little is known of the role of SLPI in the expression of osteoclast regulatory factors from osteoblasts, which are crucial for the interaction between osteoblasts and osteoclasts. Therefore, we aimed to determine the effects of SLPI on the regulation of osteoclasts and osteoblasts in LPS-treated alveolar bone and osteoblasts. Methods: Periodontitis was induced in rats using LPS. After each LPS injection, SLPI was injected into the same area. Immunohistochemical analysis was performed with antibodies against SLPI, RANKL, OPG, and Runx2 in the periodontal tissue. RT-PCR and western blotting were performed to determine the expression levels of SLPI, RANKL, OPG, and Runx2 in LPS- and SLPI/LPS-treated MC3T3-E1 cells. SLPI/LPS-treated MC3T3-E1 cells were also stained with Alizarin Red S. Results: Immunohistochemical analysis showed that the expression levels of SLPI, OPG, and Runx2 were higher while that of RANKL was lower in the LPS/SLPI group relative to those in the LPS group. The mRNA and protein expression of SLPI, OPG, and Runx2 was higher in SLPI/LPS/MC3T3-E1 cells than in LPS/MC3T3-E1 cells, and RANKL expression was lower. During differentiation, OPG and Runx2 protein levels were higher whereas RANKL levels were lower in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 cells on days 0, 4, 7, and 10. In addition, mineralization and matrix deposition were higher in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 on days 7 and 10. SLPI decreased RANKL expression in LPS-treated alveolar bone and osteoblasts but increased the expression of OPG and Runx2. Conclusion: SLPI can be considered as a regulatory molecule that indirectly regulates osteoclast activation via osteoblasts and promotes osteoblast differentiation.
골수내 정상적인 혈구형성은 줄기세포와 주위의 미세환경 사이에 일어나는 상호작용에 의해서 좌우된다고 알려져 있다. 이때 미세환경은 성장요소, 기질세포 및 기질세포가 분비한 세포외기질의 복잡한 망상구조로 이루어져 있다. 골수의 세포외기질은 거대분자로 구성되어 있으며 이중 구성요소의 일부인 당단백이 혈구형성의 조절에 주요한 요소가 된다고 많은 학자들이 주장해 왔다. 골수의 기질을 이루고 있는 망상세포, 지방세포, 섬유모세포, 혈관내피세포 및 혈관주위세포 등이 분비하는 세포외기질에 여러종류의 laminin 동형체가 함유되어 있으며 여러 종류의 혈구형성에 주요한 역할을 한다는 연구보고가 있다. 저자는 골수내 종양을 치료하기 위해 빈번히 사용되는 cyclophosphamide가 골수에 미치는 영향을 규명하고자 실험동물의 혈구형성에 영향을 미치는 laminin-1의 발현의 변화를 골수의 기질세포에서 추적하고자 하였다. 건강한 SD계 흰쥐를 실험동물로 사용하여 cyclophosphamide를 체중 kg당 75 mg을 복강내로 1회 투여하고 3일, 1주, 3주 및 5주 후 희생하여 골수조직을 채취하여 면역조직염색법으로 염색하여 laminin-1의 골수내 분포의 변화를 관찰하였고, 일부 조직은 전자현미경표본을 제작하여 1차 항체(rabbit anti-laminin)로 반응시킨 후 직경 12 nm의 금과립이 섞인 제2차 항체(biotinylated goat anti-rabbit IgG)로 다시 반응시키고 uranyl acetate로 단일염색 후 전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. Cyclophosphamide 투여 후 3일 경과군의 흰쥐 골수조직은 정맥동이 확장 되었고, 일부 조직이 괴사되었으며, 혈구형성세포가 감소되었다. 망상조직과 지방세포사이의 조직에서 laminin-1의 면역반응이 강하게 나타났다. 2. Cyclophosphamide 투여 후 1주, 2주 및 5주 투여군의 골수에서 laminin-1의 약한 면역반응이 기질조직에 계속되었고 혈구형성세포의 수는 증가되었다. 3. Laminin-1의 면역반응을 나타내는 금과립은 cyclophosphamide 투여 3일군의 골수 기질세포에서 가장 많은 수가 관찰되었고, 투여 1주, 3주 및 5주군에서는 금과립의 수량이 감소되었다. 이상과 같은 실험결과는 cyclophosphamide가 흰쥐에 투여되었을 때 골수의 혈구형성의 미세환경을 유지하는 기질세포의 laminin-1의 발현을 증가시키는 것으로 생각되었다.
경남거제지역 금(金)-은광상(銀鑛床)들은 후기 백악기 안산암류와 화강섬록암(83 m.y.)내의 열극을 충진한 함금(含金)-은(銀) 열수맥상(熱水脈狀) 광체로 구성된다. 열수광화작용(熱水鑛化作用)은 구조운동에 의하여 시기적으로 3회에 걸쳐 진행되었다. 초기 제$370^{\circ}C$의 고온에서 후기 $200^{\circ}C$에 이르는 제 I, II 광화기(鑛化期)에서는 각기 상이한 열수계(熱水系)에 의하여 석영, 유화물이 침전하였으며, $320^{\circ}C$를 전후로 하여 광화류체(鑛化流體)의 비담(沸膽)현상이 일어났다. 제 I, II 광화작용(鑛化作用)시의 압력은 <100기압이고, 심도는 500~1,250m였다. 금(金)-은(銀)의 주광화시기(主鑛化時期)인 광화(鑛化) I 기(期)의 공생광물에 대한 유체포유물(流體包有物) 및 광물열수학적(鑛物熱水學的) 연구에 의하면, 황철석, 섬아연석, 황동석은 $290^{\circ}C$ 이상의 고온에서 비담작용(沸膽作用)과 동시에 정출하였고, 사면동석, 에렉트렘, 스튜자이트는 금(金)-유황종(硫黃種)의 농도가 $10^{-3}{\sim}10^{-4}$molal, 상당염농도(相當鹽濃度)가 2~6wt.% NaCl인 광화유체(鑛化流體)로부터 $220{\sim}260^{\circ}C$, 유황 및 산소분압이 각각 $10^{-11.8}{\sim}10^{-14}$, $10^{-35}{\sim}10^{-36}$ atm인 물리 화학적 환경하에서 침전하였다. 균질화(均質化) 온도와 염농도(相當鹽濃度)와의 관계는 천수류입(天水流入)에 의한 광화류체(鑛化流體)의 냉각(冷却) 및 희석(稀釋)작용이 광석광물 침전의 주된 메키니즘이었음을 지시해 주며, 유체내(流體內) 환원(還元) 유황종(硫黃種)($H_2S$)의 감소에 따른 금류화복합체(金硫化複合體)($Au(HS)_2$) 의 파괴로 금(金)의 침전이 유도되었으리라 사료된다. 유황 및 탄소, 산소 안정동위원소(安定同位元素) 연구(硏究)결과, 광화류체내(鑛化流體內)의 유황 및 탄소는 심부화성(深部火成)기원이었고, 방해석의 산소 안정동위원소(安定同位元素)값으로부터 열수계(熱水系)에서 천수(天水)가 지배적인 역할을 하였으리라 사료된다.
Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.
환경 중에서 $Hg^{2+}$의 환원과정을 통하여 용존가스상 수은인 DGM(dissolved gaseous mercury)이 생성이 되고, 이 DGM의 대기로의 휘발이 수체에서의 중요한 이동 제거 기작이다. 아시아에서 배출하는 수은의 양이 전 세계적으로 큰 비중을 차지하는 것으로 알려져 있지만, 이 지역에 대한 DGM의 조사는 거의 없는 실정이다. 본 연구에서는 주암호를 대상으로 실시간으로 DGM 및 총 수은(TM) 농도변화를 관찰하였다. 연구 결과 여름철 주암호의 상류에서 하류까지 DGM 평균농도의 변화는 $95{\pm}8pg/L$에서 $130{\pm}15pg/L$로 증가했으나, TM의 평균농도는 상류지점 $2.1{\pm}0.7ng/L$, 하류지점 $1.7{\pm}0.3ng/L$로 낮아지는 경향을 보였다. 계절적인 DGM의 농도를 비교한 결과, 여름철 주암호의 총 DGM의 평균농도는 $109{\pm}15pg/L$로 가을철의 $19{\pm}pg/L3$ 보다 약 5.5배 높았다. 중류지점에서의 강우에 따른 DGM 평균농도의 변화는 비가 오기 전 32 pg/L에서 비가 내리는 동안 13.7 pg/L로 약 58% 감소했으며, TM은 2.2 ng/L에서 2.7 ng/L로 약 19% 증가했다. 가을철 상류지점의 일중 자외선과 DGM 평균농도의 변화는 빛의 강도와 비슷한 경향을 나타냈다. DGM의 농도와 수온, DOC의 농도 간의 통계적 분석결과는 유의한 상관관계(${\alpha}$=0.05)를 보였으나, TM의 농도는 반대의 상관관계를 나타냈다(p<0.0001). Dill et al.,(2006)의 연구와 비교한 결과, 주암호 총(n=23) DGM의 평균농도는 $109{\pm}15pg/L$로 국외 호수의 $38{\pm}16pg/L$보다 약 3배 높았고, TM의 평균 농도(n=11)는 $2.2{\pm}0.4ng/L$로 국외호수의 $1.0{\pm}1.2ng/L$ 보다 약 2.2배 높게 나타났다.
고령(高靈)-왜관(倭館) 지역 금(金)-은(銀) 광상(鑛床)은 백악기(白堊紀) 신동층군(新洞層群) 내(內)에 발달하는 열하을 충전(充塡), 3회에 거쳐 생성(生成)된 석영(石英) 및 방해석맥(方解石脈)으로 구성된다. 광화작용(鑛化作用)의 시기(時期)는 후기(後期) 백악기(白堊紀)(98 Ma) 이며, 성인적으로 암주상(岩株狀) 흑운모(黑雲母) 화강암(花崗岩)의 매입(買入) 고결작용(固結作用)과 관련된 것으로 고려된다. 유체포유물(流體包有物) 및 안정동위원소(安定同位元素) 연구(硏究)에 의하면, 금(金)-은(銀)의 침전은 1.7~8.7wt.% NaCl 상당(相當) 감농도(監農度)를 갖는 광화유체(鑛化流體)로부터 $280^{\circ}C$에서 $230^{\circ}C$에 걸쳐 진행되었으며, 광화(鑛化) 작용시(作用時)의 압력(壓力)은 <100bar, (심도(深度))는 425~1,150m였다. 유황(硫黃) 안정동위원소(安定同位元素) 연구(硏究)의 결과, 주광화시기(主鑛化時期)인 광화(鑛化)I기(期)중 광화유체(鑛化流體)의 ${\delta}^{34}S_{H_2S}$ 값이 초기(初期) +1.4‰에서 후기(後期) -2.5‰로 점차 감소함은 광화유체(鑛化流體)의 비등(沸騰)에 수반되어 수소(水素)이온농도(濃度)와 산소분압(酸素分壓)이 점진적으로 증가한 결과로 해석된다. 광화유체(鑛化流體)의 수소(水素) 및 산소(酸素) 동위원소(同位元素)값(${\delta}D$ = -90~-100‰${\delta}^{18}O$ = 3.9~-11.4‰)으로부터 열수계(熱水系)에서 천수(天水)가 지배적인 역할을 하였음을 알 수 있으며, 비등(沸騰)하는 유체(流體)가 동위원소(同位元素) 교환반응(交換反應)이 적게 일어난 천수(天水)와 혼합(混合)되면서 냉각(冷却) 및 희석(稀釋)된 결과로 금(金)-은(銀)의 심전(沈澱)이 야기된 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.