• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.871-873
• /
• 1999

According to the reports about the failure mode analysis of modules and systems, It is said that there are many early failure of system. To remove latent defects which causes early failures like that, It is necessary that screening test is performed. ESS is often used fur screening electronic equipments, and is proposed by the most powerful tool for removing latent defects of electronic equipments. [1][2] In this report, the procedure of the environmental stress screening which uses the temperature cycling stress is proposed. It is considered about environmental conditions of distributed control system(DCS) to be tested, design specifications of the system, recommended conditions of relative IEC-STD and applied conditions of similar company. ESS test was applied at the DCS to be installed in power plant. As the results of analyzing discovered problems. It was found that almost latent defects of electronic control systems was discovered early.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• 산업공학
• /
• 제19권2호
• /
• pp.117-123
• /
• 2006

Many products, such as gasoline, polymer plastics, alloys, and ceramics are manufactured by mixing two or more ingredients or components. When we are to develop new mixture products, we must deal with a long list of potentially important component variables. This paper introduces some mixture screening designs, analysis tools for screening important variables, and a guideline for applying these analysis tools. The results of this paper will be helpful to engineers who work in the research and development sector of mixture product industries.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권3호
• /
• pp.969-974
• /
• 2012

Mammography utilization is low in Iran compared with other countries. Here a cross-sectional survey design was used to investigate psycho-social and individual factors associated with mammography among 400 women asymptomatic of breast cancer. The study was carried out at the four outpatient clinics of Tehran during the period from July through October, 2009. We found that mammography screening was related to higher self-efficacy and women's occupation. Future tailored interventions on potential psycho-social determinants and specific demographic factors are critical in increasing mammography screening rates among Iranian women.

• Earthquakes and Structures
• /
• 제16권1호
• /
• pp.29-39
• /
• 2019

A three-step screening process is presented in this article for selection of consistent earthquake records in which number of suitable ground motions is quickly screened and reduced to a handful number. Records that remain at the end of this screening process considerably reduce the dispersion of structural responses. Then, an effective method is presented for spectral matching and modification of the selected records. Dispersion of structural responses is explored using different statistical measures for each scaling procedure. It is shown that the Uniform Design Method, presented in this study for scaling of earthquake records, results in most cases in the least dispersion measure.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1472-1478
• /
• 2006

Double-deck train has been attracted growing attention as next generation transportation around metropolis because of high passenger carrying capacity. To develop high-speed double-deck train with low operational costs, the carbody must be designed as light as possible. In addition, the carbody must be strong enough to ensure the safety of passengers. To meet these design requirements, we perform systematically weight minimization that determines thickness of aluminum extruded panels of the carbody. First, to reduce the design variables, we carry out the screening process that select sensitive or/and important design variables through design exploration. Then, weight minimization is accomplished under multi-loading condition such as vertical, compressive and torsional loads, while satisfying strength constraints of the design regulations. Finally, the result of design optimization is discussed by comparison with its initial design.

• 산업공학
• /
• 제21권1호
• /
• pp.43-50
• /
• 2008

Understanding consumers' latent desires for product form has now become a critical issue in product design. Accordingly, product development processes is rapidly changing from product-oriented development to user-centered development. Driver visibility is considered as an important element of driving posture packaging in automobile interior design. This study presents a systematic process for driver visibility analysis approached from affective engineering method that provides design variable selection and screening with respect to the image/impression element of the human visibility. Also, the analysis of front visibility, often called the feeling of "openness", in motor vehicle interior design, is selected and practiced a case study using the systematic process proposed in this study. Twenty six participants evaluated the feeling of openness for thirty motor vehicles following the perceived scale of affective design factors. The results showed that variables such as the height of head lining, the height of cluster housing, the gradient of windshield and the volume of A-pillar were the critical design variables which affect the feeling of openness in a motor vehicle.

• 한국실내디자인학회논문집
• /
• 제13권2호
• /
• pp.64-71
• /
• 2004

This study attempts to clarify inter-relationship between design expression in the surface of contemporary multi-family housing and physical trends in this digital age. The study examines characteristics of housing design influenced from new digital technology in the forms of metaphor such as dematerialization, fluidity and mobility. Currently constructed multi-family housing in Europe after 1990 has been analyzed to find digital reflections in the surfaces. As a conclusion, findings are as follows; In this digital age, a house is considered as a base in the forms of boxes and containers to network to outer worlds. In a complex of multi-family housing, public spaces move to the inside and become parts of private domain. Therefore, a house directly faces a street/outer world without transitional areas and devices. The facades of housing become delicate skins to control private domain in the inside and the world in the outside. In this digital age, the surfaces of housing are designed by ways of wrapping and screening. Printing and mapping methods are used to surface design because they are manipulative and flexible methods in design like graphic design. Screening devices using louvers and shutters are powerful tools to make random and unpredictable images. If units of a louver and a shutter were pixels, a whole surface would be a digital screen. In such assumption, the facade of buildings reflects digital screen to interface while the louvers in operation reflect clicking to network. As a conclusion, design expression in surfaces in-between of multi-family housing is a metaphor of digital mechanism.

• 한국정보시스템학회지:정보시스템연구
• /
• 제28권2호
• /
• pp.25-52
• /
• 2019

Purpose Despite the recent increase in the use of selection tools using artificial intelligence (AI), far less is known about the effectiveness of them in recruitment and selection research. Design/methodology/approach This paper tests the impact of AI-based initial screening and interview on intentions to apply. We also examine the moderating role of individual difference (i.e., reliability on technology) in the relationship. Findings Using policy-capturing with undergraduate students at a large university in South Korea, this study showed that AI-based interview has a negative effect on intentions to apply, where AI-based initial screening has no effect. These results suggest that applicants may have a negative feeling of AI-based interview, but they may not AI-based initial screening. In other words, AI-based interview can reduce application rates, but AI-based screening not. Results also indicated that the relationship between AI-based initial screening and intentions to apply is moderated by the level of applicant's reliability on technology. Specifically, respondents with high levels of reliability are more likely than those with low levels of reliability to apply for firms using AI-based initial screening. However, the moderating role of reliability was not significant in the relationship between the AI interview and the applying intention. Employing uncertainty reduction theory, this study indicated that the relationship between AI-based selection tools and intentions to apply is dynamic, suggesting that organizations should carefully manage their AI-based selection techniques throughout the recruitment and selection process.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.15-25
• /
• 2018

Purpose: The important things in space plan of a screening center are improving the spatial awareness by space systemization and minimizing the examination time for customers, and reducing the required time of screening work and maximizing the capacity for the screening center. Therefore, we tried to solve the problem of improving spatial awareness and reducing the examination time by using the pedestrian based discrete event simulation at the minimum cost. Methods: We have analyzed the drawbacks and the supplement points by comparing the floor plan at the time of opening and the current floor plan. Based on the analysis, we propose an improved plan which changes the location of the examination rooms and the number of services, and we also verify the improved plan based on simulation analyses. Results: 1) Through the analyses, we derived the drawbacks of the floor plan at the time of opening, and we realized that the current floor plan reflects the drawbacks. 2) The major reasons of the long examination time are the human traffic jam and the occurrence of queues due to unreasonable allocation of services. 3) Through the discrete event simulation analyses, it was possible to specify the place of the queues manually so as to use the given space fairly. 4) Using the discrete event simulation, it was possible to reduce the examination time and to improve the spatial awareness effectively at the minimum cost. Implications: Although the proposed simulation methodology in this paper is an analysis of the existing screening center, we expect that the proposed methodology will be used to develop a more efficient architectural design process by pre-applying the method to the course of designing a screening center and finding the suitability of the proposed method with the matched number of services.