• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.377-381
• /
• 2006

This paper describes experimental work to control supersonic jet noise using a mesh screen that is placed at the nozzle exit plane. The mesh screen is a wire-gauze screen that is made of long stainless wires with a very small diameter. The nozzle pressure ratio is varied to obtain the supersonic jets which are operated in a wide range of over-expanded to moderately under-expanded jets. In order to perturb mainly the initial jet shear layer, the hole is perforated in the central part of the mesh screen. The hole size is varied to investigate the noise control effectiveness of the mesh screen. A schlieren optical system is used to visualize the flow fields of supersonic jet with and without the mesh screen device. Acoustic measurement is performed to obtain the OASPL and noise spectra. The results obtained show that the present mesh screen device leads to a substantial suppression of jet screech tones. The hole size is an important factor in reducing the supersonic jet noise. For over-expanded jets, the noise control effectiveness of the mesh screen appears more significant, compared to correctly and under-expanded jets

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.458-465
• /
• 2017

The purpose of the present study was to examine the method of physically processing oyster shells for use as raw material(aggregate) through experimentation. The results of the experiment found that the adequate particle size of the pulverized oyster shells should be smaller than 10mm due to their shape. Also, after considering various particle size distributions and residual rates by particle size, the study found the cutter mill to be the most suitable tool for pulverizing oyster shells. The use of a cutter mill resulted in recovery rates of 97.3%, 98.2%, and 98.9% for inner screens of 8mm, 12mm, and 20mm respectively, revealing how the increase of screen size results in slightly higher recovery rates. The experiment involving the difference between the inner screen of the cutter mill and the speed of the inverter shows that a smaller screen size and a faster inverter speed result in a lower fineness modulus, while a rise in inverter speed for an identical screen made possible the material recovery of a much lower range of particle sizes.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.29-38
• /
• 1997

The research on the factors which effect on legibility is mainly utilized as the basic data of selecting the standard guideline of VDT screen. But the research on Korean is scarcer than that of English. Furthermore, it is unreasonable to apply the results of the foreign language to Korean, beause of the difference between the typography of English and that of Korean. Therefore, more systematic and ergonomic research of the Korean typography on VDT screen is needed. In this paper, an experimental study on search speed and error rate is designed and performed according to different Korean letter size and font on search task with VDT. The experimental screen based on popular Ming and Gothic style is made up of total 12 artificial screens, each 6 different font size. As the criteria of the performance, searching speed(s.s.) and error rate (e) are selected, and CFF value is measured to evaluate user's visual fatigue. The results of experiment in font show that the Korean Gothic style is superior to the Korean Ming style in user's visual performance. The letter size that gives user the optimal performance ranges from the visual angle 39.8' to 55.5' in Ming style, from the visual angle 39.8' to 52.6' in Gothic systle. In visual fatigue experiment, the better performance of letter size is, the less tired user feels. And the smaller letter size is, the more tired user feels. There is no relationship between font and user's visual fatigue.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.499-507
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by using screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes (multiwalled or singlewalled), and some additive materials. The pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks (i.e. increase in the opening size of the screen mesh) resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with silver pastes, silver powders appeared to contribute to the vertically aligning of carbon nanotubes on a glass.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.367-372
• /
• 2006

A carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size was fabricated using a screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After a surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20 nm. Using the photo-sensitive CNT paste, we have developed a triode type CNT FEA with a self-aligned gate-emitter structure. The turn on voltage was around 100 V which corresponds to according the turn on field of about $40V/{\mu}m$. By the creation of a self-aligned gate-emitter structure, it is expected that the screen printed photo-sensitive CNT paste is promising as a good candidate for the large size field emission display.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.627-632
• /
• 2006

최근 들어 인간과 컴퓨터 상호작용 분야에서 기존의 인지적인 측면 이외에 정서의 역할에 대한 관심이 증폭되고 있는 추세이다. 본 연구에서는 사용자가 좁은 화면을 통해 정보검색을 수행 할 때 정서 상태에 따라 정보 검색 패턴이 다른지 알아보고자 하였다. 실험참가자들의 정서 상태를 인위적으로 유도하기 위해 검색과제를 수행하기 전에 긍정적인 정서와 부정적인 정서를 유발시킬 수 있는 음악을 듣게 하였고 동시에 자신의 과거 기역으로부터 긍정적인 정서 혹은 부정적인 정서를 유발 시킬 수 있는 과제를 수행하도록 하였다. 정서 유발 과정이 끝난 뒤 각 실험 참가자들은 좁은 화면을 통해 정보 탐색 과제를 수행하였다. 정보 탐색 과제는 주어진 시간 동안 제시되는 나라들에 대한 여행 정보를 검색하는 것이었고 정보 검색이 이루어지는 동안 소요된 시간 및 검색 페이지 링크가 기록되었다. 실험결과 긍정적인 정서상태에서는 중립 상태와 부정적인 정서 상태에 비해서 보다 광범위하고 빠른 정보검색이 이루어지는 것으로 나타났다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.550-553
• /
• 2005

[ $Pb(Zr_{0.2}Ti_{0.8})O_3$ ] powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT thick films were fabricated by the screen-printing techniques on Pt/alumina substrates. The structural and dielectric properties were examined as a function of sintering temperature. The particle size distribution of the powder is bimodal with the mean particle size of about $1.2\;{\mu}m$. The average grain size of the PZT thick films sintered above $1000^{\circ}C$ was about $3.1\;{\mu}m$ and the thickness of the specimens was approximately $41\;{\mu}m$. The relative dielectric constant and dielectric loss of the thick films sintered at $1050^{\circ}C$ were 337 and $1.24\%$, respectively.

• Journal of Korea Game Society
• /
• v.6 no.3
• /
• pp.77-86
• /
• 2006

We have developed a virtual touch screen system which has improved on the standard functions of general tooth screen systems, and it also can be used for game applications. It is based on an image processing system which does not require a physical screen like traditional touch-screen system. Our system requires only two standard PC cameras, so that there is no limit of the size of the touch screen. The developed system can be installed easily and implemented with low cost, and can be applied to new kinds of games.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.41-55
• /
• 1993

Recently, various screen film system have been introduced in diagnostic radiology. There are two kinds of screen film system : blue emitting $CaWO_4$ screen has been largely used in these days. However, it tends to be changed to use green emitting $Gd_2O_2S$ : Tb screen. In this study, photographic characteristics of $CaWO_4$ and $Gd_2O_2S$ : Tb screen were investigated with luminescence, spectroscopy. The morphology of $CaWO_4$ and $Gd_2O_2S$ : Tb were also observed by using scanning electron microscope. The result obtained were as follows : 1. There was small difference in the thickness of phosphor layers for the front and back screen of blue emitting system, but little difference in those of green emitting system. 2. There was no difference in the size of phosphor particles between the front and back screen for each screen. However, the particle size was different for the various kinds of screens. 3. The shape of phosphor particle was round with many faces for all the screens. 4. In the exposure of X-ray with the same intensity, luminescent intensity of a green emitting system was $6{\sim}7$ times larger than that of a blue emitting system. 5. The thickness of phosphor layers does not affect on the sensitivity of the screens exposed by X-ray.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1057-1062
• /
• 2007

The purpose of this study is to find out design parameters of vibrating screen, such as particles motion, specific gravity, shape, and kinetic friction. In order to approach this problem, four materials of construction wastes, wood, styrofoam, concrete, and sand are used for dynamic modeling. To present friction between the particles material and tilt plates material, these particles model is applied in order to verify effectively. Generally, the vibrating screen is composed of three assemblies such as screen, wastes guide, supported of screen. This model regards vibrator as system of screen fixed tilt plates. The model is analyzed to present what kind of particles motion while the system is vibrating. and this vibration system has been implemented in a ADAMS dynamaic program. This modeling is consist of dynamic model separation state on particle size. This study make good technique to verify in theory.