• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.207-210
• /
• 1998

Surface electrical conduction in insulator is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the widely used materials for outdoor insulator - porcelain, EPDM, Silicone rubber - were discussed by measuring properties of average leakage current and scintillation discharge pulses under artificial contamination conditions. The artificial contaminations used were deionized distilled water fog, 0.5wt% NaCl salt fog of light pollution and 2wt% NaCl salt fog of medium pollution. The average leakage current was appeared linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage was most different to that in case of dry and clean condition. In case of salt fog pollution condition. The leakage current was increased above critical voltage. The scintillation discharges were also activated at the level the leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.443-448
• /
• 2010

In this work, the scintillation properties of CsI:Na crystal were investigated as radiation detection sensor. This scintillation material was grown by a 2-zone vertical Bridgman method. Under X-ray excitation the crystal shows a broad emission band between 280 nm and 690 nm wavelength range, peaking at 413 nm. Energy resolution for $^{137}Cs$ 662 keV $\gamma$-rays of the crystal was measured to be 6.9 %(FWHM). At room temperature, the crystal exhibits three exponential decay time components. The fast and major component of scintillation time profile of the crystal emission decays with a 457 ns time constant. Absolute light yield of the crystal was estimated to be 53,000 ph/MeV using LAAPD. The sample crystal shows proportionality of 30 % in the measured energy range from 31 to 1,333 keV. And the $\alpha/\beta$ ratio of the crystal was 0.14.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.2
• /
• pp.129-132
• /
• 2023

Purpose: Positron emisson tomography (PET) is a crucial medical imaging scanner for the detection of cancer lesions. In order to maintain the improved image quality, it is crucial to apply detectors of superior performance. Therefore, the purpose of this study was to compare PET image quality using Monte Carlo simulation based on the detector materials of BGO, LSO, and LuAP. Materials and Methods: The Geant4 Application for Tomographic Emission (GATE) was used to design the PET detector. Scintillations with BGO, LSO and LuAP were modelled, with a size of 3.95 × 5.3 mm2 (width × height) and 25.0 mm (thickness). The PET detector consisted of 34 blocks per ring and a total of 4 rings. A line source of 1 MBq was modelled and acquired with a radius of 1 mm and length of 20 mm for 20 seconds. The acquired image was reconstructed maximum likelihood expectation maximization with 2 iteration and 10 subsets. The count comparison was carried out. Results and Discussion: The highest true, random, and scatter counts were obtained from the BGO scintillation detector compared to LSO and LuAP. Conclusion: The BGO scintillation detector material indicated excellent performance in terms of detection of gamma rays from emitted PET phantom.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.180-187
• /
• 1999

Radiocarbon dating method using benzene liquid scintillation was performed on the oyster shell fragments which producted from the shell mounts at Hadong Mogdori in Kyeongsangnamdo. This paper described to the age dating method and compared to the result. The carbon in sample is synthesized to a benzene through the sample preparation, $SrCO_3$, $SrC_2$, $C_2H_2$ and $C_6H_6$ synthesizing process. Age dating is calculated by Wallac 1415 Liquid Scintillation Counter. The result of age dating is estimated to be $4905{\pm}112$ yr BP in Yosu Univ. which is a good agreement with the result in Shimane Univ. ($4912{\pm}123$ yr BP). Radiocarbon dating method using benzene liquid scintillation is a simple and economical in operation and establishment, it has a potential instrumentation in the university and research institute.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.525-531
• /
• 2021

The detector of the positron emission tomography (PET) is composed using a plurality of scintillation pixels and photo sensors. The use of multiple photo sensors increases cost and complicates signal processing. In this study, a detector with reduced cost and simple signal processing was designed using a small number of photo sensors. A scintillation pixel and a small number of photo sensors were used, and a optical guide was used to deliver light to all the photo sensors. A reflector is applied to the scintillation pixel and the optical guide to transmit the maximum amount of light to the photo sensor. A diffuse reflector and a specular reflector were used for the reflector, and a flood image was obtained by applying different thicknesses of the optical guide. An optimal combination was selected through comparative analysis of the acquired flood images. As a result, when specular reflectors were used for both the scintillation pixel and the optical guide, excellent flood images were obtained from optical guides of all thicknesses. For the optical guide, the optimal image was obtained when using a 3 mm thickness in consideration of the size of the image and the analysis of the point where the image of the scintillation pixel was formed.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.131-134
• /
• 1997

Scintillation crystals for industrial field are used in fundamental physics i.e. nuclear and high energy physics experiments besides the medical imaging, process control and gauging, container inspection, mineral process etc. For the reason of limited marketability, there are not so many studies with emphasis paced on the crystal growth. The scintillation crystal is an important theme in the studies in the fundamental physics and researchers for crystal growth are expected participate it. The present work is partly supported by a Grant-in-Aid from the Japanese Ministry of Education, Science and Culture.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.5-109
• /
• 2001

The separation of scintillation phenomena concurrent with rain attenuation phenomena can be accomplished by filtering. Based on the analysis of satellite signal fading during rain, scintillation and rain attenuation phenomena are examined and extracting from raw data by using adaptive IIR high-pass filter and adaptive IIR low-pass filter. Adaptive IIR filter are designed by using the algorithm of Least Mean p-Power (LMP) Error Criterion which have been modified by Quantizing Gradient technique. This algorithm reduces amount of multiplication computational equal to the length of input data. It is prove here that the convergence speed, variance, bias independence on p values. For this application, p=1 is chosen. The procedure of application ...

• The Korean Journal of Nuclear Medicine
• /
• v.17 no.1
• /
• pp.79-84
• /
• 1983

우리나라에 방사성동위원소가 진단 및 치료에 이용된지 20여년이 되였으며 특히 80년대에 들어와서는 Scintillation Camera의 급격한 증가가 이뤄지게 되었다. 그러나 많은 기기의 증가로 품질관리가 필요하게 되었다. 핵의학장비의 품질관리 목적은 장비기능의 정상여부를 조기에 발견하여 항상 균등한 질의 영상을 재현시켜 진단을 보다 정확하게 하는데 있다. 따라서 Scintillation Camera를 사용할 때 사용자는 기계의 기능과 성능을 항상 정확하게 파악하여 적절한 대책을 세워 보다 정확한 영상을 얻을 수 있도록 해야 한다. 저자들은 이러한 점을 고러하여 Scintillation Camera의 품질관리에 대한 원칙과 기술적인 문제점을 문헌고찰과 함께 보고하는 바이다.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.159-164
• /
• 2018

An evaluation of various radiometric methods to analyze $^{226}Ra$ in water has been employed on a set of 10 standard solutions of different concentrations in the range of $1-10Bq/L^{-1}$. The analysis was carried out using well-established procedures by means of gamma-ray, alpha-particle and liquid scintillation spectrometry. The feasibility of the various methods has been quantified in terms of relative standard error and percentage error. Correlations between the various methods have been presented and discussed. In general, good agreement was found in the results of various methodologies, which assures the accuracy of the methods and allows for the validation of instrumentation and procedures. Of the different methods adopted here, a combined procedure for the determination of $^{226}Ra$ along with $^{228}Ra$ using Quantulus 1220 ultra-low level background liquid scintillation counting gave the most accurate results.

• Journal of Astronomy and Space Sciences
• /
• v.5 no.2
• /
• pp.123-127
• /
• 1988

Interplanetary scintillation is the fluctuation produced in the apparent brightness of a radio source, due to refractive effects in the apparent brightness of a radio source, due to refractive effects in the turbulent solar wind flowing from the sun. If this medium is illuminated coherently, analysis of the spatial and temporal properties of the radiation reaching the earth allows the stochastic properties of the medium to be understood. Here, a brief review of method of interplanetary scintillation to study solar wind behavior will be introduced.