• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.139-145
• /
• 2016

With the development in field of industry and medicine, new machines and techniques are being launched. Moreover, the complexity of the techniques is associated to an increasing risk of incident. Especially, a small error in radiotherapy can lead to a serious patient-related incident, risk management is necessary in radiotherapy in order to reduce the risk of incident. However, in field of radiotherapy, there are no legally binding clauses for risk management and there is an absence of risk management systems at an institutional level. Therefore, we analyzed institutional status of risk management, reporting & classification systems, and risk assessment & analysis in 31 countries. For risk management and reporting systems, 65% of countries investigated had legislation or regulations; however, only 35% of countries used classification systems. It was found that 43% more countries had legislation for risk management in healthcare than those for radiotherapy; 19% more countries had reporting systems for healthcare than those for radiotherapy. For classification systems, 60% more countries had legislation, recommendation, and guidelines in the field of radiotherapy than those for healthcare. Recently, international institutes have published several reports for risk management and patient safety in radiotherapy, owing to which, countries adopting risk management for radiotherapy will gradually increase. Before adopting risk management in Korea, we should precisely understand the procedures and functions of risk management, in order to increase efficiency of risk management because classification & reporting system and risk assessment & analysis are connected organically, and institutional management is needed for high quality of risk management in Korea.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.94-104
• /
• 2014

This contribution studied knowledges, informations and main project issues for systematic conservation management utilize of Joseon Royal Tombs guaranteeing their Outstanding Universal Value, Authenticity and Integrity, and the outcomes are as follows. The first, regarding the tomb's system, it should be planned to enhance authenticity and integrity of Joseon Royal Tombs through historical facts, measurement, diagnosis and intervention according to international and national charters, statements and general standards. The second, regarding prevention against disasters, the anti-fire system including construction of GIS materials and the Risk Map following investigation the present condition, premising improvement of relevant laws and regulations, should be planned. The third, we should consider, regarding utilize, educational application by the each tomb's story and royal ancestral rite, tourism by the local area of each tomb and industrial application by science and IT technologies.

• Korean Journal of Hospice Care
• /
• v.7 no.1
• /
• pp.15-28
• /
• 2007

This study was focused on figure out what kinds of elements are influencing on job satisfaction with approach of the educational system. It was also to figure out how work characteristics and role conflicts of employees influence on job satisfaction. Objects of study were employeeswho had been working in Hospice and Palliative medical center at least for 6 months, and they were doctors, nurses, ministers, and welfare workers. Collected materials were analyzed by Frequency Analysis, One-way ANOVA, Correlation Analysis, and SimpleRegression Analysis. Results from study can be summarized like below. The first, job satisfaction of workers in Hospice and Palliative medical center were 3.36, and this numerical value is pretty high over all. For saying from the higher to the lower satisfaction level, there were satisfaction with job itself, satisfaction with co-workers, satisfaction with seniors (superiors), and satisfaction with organizations, on the other hands, satisfaction with salaries was turned out as the lowest level among those. The second, role conflict was 2.63, and it is considered as the medium level. after inquiring into it by elements of role conflict, they felt many environmental difficulties compared to other workers in different fields such as environmental difficulty, role ambiguity, insufficient ability, process obscurity, etc. The third, work environment influencing on job satisfaction are as follows. Professional environment among characteristics of work environment was significant statistically. Job satisfaction of ministers was the highest; others were in the order of doctors, welfare workers, and nurses. For employment history, job satisfaction was higher as they have more and longer job experience including whole professional experience both in hospice and palliative medical center. In addition, participating in hospice and palliative programs, intensive training regularly was significantly. Job Motivation was also significant statistically. Especially, job satisfaction was higher when people decided to work in hospice and palliative medical center because of individual desire (self-realization). Lastly, influence of role conflict on job satisfaction is as follows. Environmental difficulty, role ambiguity, insufficient ability, process obscurity, etc showed the significant meaning statistically, and the lower role conflict was related with the higher job satisfaction. Suggestions for next study based on such results are as follows in order to improve or increase job satisfaction of employees in hospice/palliative medical centers. The first, to expand education opportunity of employees is needed to increase job satisfactionof hospice/palliatives medical centers. Participating in intensive programs and seminars by types of occupation and acquiring professional knowledge are very important since employees are motivated by those activities. For that, developing and activating intensive education/programs by professional occupations are suggested. The second, dividing roles of employees and determining each job's limit clearly in hospice/palliative medical centers are required. For that, study developing standard job regulations is suggested for each professional job. Lastly, developing and providing reasonable salaries is needed because low salaries of hospice/palliative medical centers are the absolute reason lowering job satisfaction. Therefore, this paper suggests improving the salary level of employees of hospice/palliative medical centers and developing practical plan for it.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.265-270
• /
• 2012

The delay in the construction permit for the building, which obtained the approval of business proposal, may lead to a difference in the maintenance cost ranging between 20% and 30% in the neighborhood where the residents moved in, along with the new project under construction in the surrounding area amidst rigorous regulations that aim to promote energy-saving and the heightened interest of the public in energy conservation, and such problem would become the major source of serious public complaints. Thus, the energy-saving plan needs to be prepared when the approval is granted to the business plan. In order to prevent public complaints or ensure effectiveness of government's energy plan, it may be effective to apply the energy-saving plan based on current standards upon the award of construction permit when two years have elapsed since the date of the scheduled commencement of construction or when the start of construction is delayed as stipulated in the Article 18 of the Enforcement Decree of Housing Act. If the energy-saving plan and related technologies are merely the parts of license and permit process without fully serving their purposes and functions, it would be waste of time to deploy a lot of workforce and review and seek consultation. The government or owners of buildings need to fully understand the energy-saving aspects and exert effort to enhance the energy efficiency of buildings.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.128-133
• /
• 2010

Purpose: All-terrain vehicle (ATV)-related injuries have increased since the introduction of ATVs to Korea. The purpose of this study is to compare patients with ATV-related injuries (PATV) to patients with motorcycle (MC)-related injuries (PMC). Methods: We retrospectively analyzed the clinical records of PATV and PMC who visited an emergency center in 2008. The cases of PMC were 164, and those of PATV were 52. Results: While PMC are seen evenly in the first half year and the second half year, PATV are seen mainly the first half year (from March to June: 73%). For PMC the most frequent injury mechanism was collision with another vehicle, while for PATV, it was side overturn/roll over. The injury severity score (ISS), the revised trauma score (RTS), the trauma score and the injury severity score (TRISS) were $5.6{\pm}5.6$, $7.7{\pm}0.7$, $5.0{\pm}2.1$ for PMC and $7.1{\pm}7.5$, $7.7{\pm}1.1$, $5.5{\pm}1.5$ for PATV, respectively. The most common injury sites were the lower extremities for PMC and the face for PATV. The rates of admission, surgery and the length of hospital stay were similar between PMC and PATV. Conclusion: This study shows that the risk of ATV accidents is similar to that of MC accidents. We recommend that the same safety standards and regulations that are applied to MCs should be used for ATVs. Safe and enjoyable paths have to be sought for drivers of ATVs.

• Journal of the Society of Disaster Information
• /
• v.1 no.1
• /
• pp.3-26
• /
• 2005

In recent years, there is growing concern about the potential use of biological agents in war or acts of terrorism accompanied an increased realization that rapid preparedness and response are needed to prevent or treat the human damage that can be caused by these agents. The threat is indeed serious, and the potential for devastating numbers of casualties is high. The use of agents as weapons, even on a small scale, has the potential for huge social and economic disruption and massive diversion of regional and national resources to combat the threat, to treat primary disease, and to clean up environmental contamination. Biological weapons are one of weapons of mass destruction (or mass casualty weapons, to be precise. since they do not damage non-living entities) that are based on bacteria, viruses, rickettsia, fungi or toxins produced by these organisms. Biological weapons are known to be easy and cheap to produce and can be used to selectively target humans, animals, or plants. Theses agents can cause large numbers of casualties with minimal logistical requirements (in wide area). The spread of disease cannot be controlled until there is awareness of the signs of infection followed by identification of agents; and if the organism is easily spread from person to person, as in the case of smallpox, the number of casualties could run into the tens of thousands. Biological weapons could be used covertly, there can be a lot of different deployment scenarios. A lot of different agents could be used in biological weapons. And, there are a lot of different techniques to manufacture biological weapons. Terrorist acts that make use of Biological Agents differ in a number of ways from those involving chemicals. The distinction between terrorist and military use of Biological Weapon is increasingly problematic. The stealthy qualities of biological weapons further complicate the distinction between terrorism and war. In reality, all biological attacks are likely to require an integrated response involving both military and civilian communities. The basic considerations when public health agencies establish national defence plan against bioterrorism must be 1) arraying various laws and regulations to meet the realistic needs, 2)education for public health personnels and support of concerned academic society, 3)information collection and cooperative project with other countries, 4)Detection and surveillance(Early detection is essential for ensuring a prompt response to biological or chemical attack, including the provision of prophylactic medicines, chemical antidotes, or vaccines) and 5) Response(A comprehensive public health response to a biological or chemical terrorist event involves epidemiologic investigation, medical treatment and prophylaxis for affacted persons, and the initiation of disease prevention or environmental decontamination measures). The purpose of this paper is providing basic material of preparedness and response for biological terrorism in modern society.

• Korean journal of communication and information
• /
• v.55
• /
• pp.50-73
• /
• 2011

This paper investigates the effectiveness of Real-Name System on Internet, which has been applied to some Internet service provider bulletin boards in Korea. The goal of the Real-Name system on the Internet is controlling expression of slanderous or abusive language. The effectiveness of the regulation is dependent on the people's perceptions and attitude toward to the legislation. This empirical study examines the antecedents that affect the perceptions and attitude toward the regulation. Further, we investigate the relationships among variables such as internet public sphere participation, attitude to the regulations, and intention to choose detours. Results of regression analysis show that the younger and the more progressive individuals are, the more they oppose the implementation of the law. Also, it was found that people who have more political interest and participate more actively in public sphere via internet, tend to oppose the law. Structural equation models reveal that participation in online public sphere drives negative attitudes about the regulation. In addition, people with negative perceptions about the law tend to choose the detours such as 'cyber asylum' and 'service asylum'.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.78-89
• /
• 2009

Overall 25~30 new golf courses are opening in Korea these days, and total annual rounds have been also increasing by 10~15% every year. The Korean golf industry is being recognized as the largest growing golf industry in the world. However, it is easily defined that there are many problems of golf course development and construction methods such as construction fees. The average construction cost for golf course development and golf course maintenance fees in Korea are much more than the cost in the USA and other countries. It may be due to the fact that USA golf course development is managed by a highly developed construction method and well trained specialists. This study will be concentrated on one of the major differences, which is about cart path material; this causes a big difference of construction and maintenance fees. In order to overcome this study, concrete and asphalt will be specified as the main cart path material. Also, some case studies and construction regulations of golf course development in the USA will be introduced for a better understanding of this study.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.22-34
• /
• 2016

The Project Delivery System (PDS) is used in mixed way without clear classification from tendering system and the standard itself that can be selected is set with project budget or estimated cost only. Essentially, the PDS should consider and reflect project characteristics and types, internal and external factors for the purpose of improving the lives of citizens and their welfare. However, the current status is not operated flexibly due to the given budget, period and uniform laws and regulations. In order to solve this problem, this study suggests a Decision Support Model to select the optimal PDS for public construction projects. The current problem of the PDS for public construction projects were identified and the application of a decision support model was proposed. Subsequently a decision-making model was suggested for each PDS using the identified factors and linear discriminant function of discriminant analysis. An additional questionnaire survey and actual practical case analysis were carried out to verify the effectiveness and applicability of the model to actual work. It can be used by adjusting the decision support model and detailed factors according to the specific characteristics of public organization, ability of person in charge and project type.