• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.41-48
• /
• 2012

A Vehicular Ad-hoc Network (VANET) is a vehicular specific type of a mobile ad-hoc network, to provide temporary communications among nearby vehicles. Mobile node of VANET consumes energy and resource with participating in the member of network. In a VANET, data replication and cooperative caching have been used as promising solutions to improve system performance. Existing cooperative caching scheme in a VANET mostly focuses on weak consistency is not always satisfactory. In this paper, we propose an efficient cache management scheme to maintain strong data consistency in a VANET. We make an adaptive scheduling scheme to broadcast Invalidation Report (IR) in order to reduce query delay and communication overhead to maintain strong data consistency. The simulation result shows that our proposed method has a strength in terms of query delay and communication overhead.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.

• Archives of Plastic Surgery
• /
• v.43 no.5
• /
• pp.451-456
• /
• 2016

Background Comprehensive aesthetic surgery training continues to be a challenge for residency programs. Our residency program developed a rhinoplasty-based objective structured clinical examination (OSCE) based upon validated methods as part of the residency education curriculum. We report our experience with the rhinoplasty-based OSCE and offer guidance to its incorporation within residency programs. Methods The encounter involved resident evaluation and operative planning for a standardized patient desiring a rhinoplasty procedure. Validated OSCE methods currently used at our medical school were implemented. Residents were evaluated on appropriate history taking, physical examination, and explanation to the patient of treatment options. Examination results were evaluated using analysis of variance (statistical significance P<0.05). Results Twelve residents completed the rhinoplasty OSCE. Medical knowledge assessment showed increasing performance with clinical year, 50% versus 84% for postgraduate year 3 and 6, respectively (P<0.005). Systems-based practice scores showed that all residents incorrectly submitted forms for billing and operative scheduling. All residents confirmed that the OSCE realistically represents an actual patient encounter. All faculty confirmed the utility of evaluating resident performance during the OSCE as a useful assessment tool for determining the Next Accreditation System Milestone level. Conclusions Aesthetic surgery training for residents will require innovative methods for education. Our examination showed a program-educational weakness in billing/coding, an area that will be improved upon by topic-specific lectures. A thoroughly developed OSCE can provide a realistic educational opportunity to improve residents' performance on the nonoperative aspects of rhinoplasty and should be considered as an adjunct to resident education.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.18-26
• /
• 2008

In this paper, dynamic GTS scheduling method based on IEEE 802.15.4 is proposed for wireless control system considering reliability and real-time property. The proposed methods can guarantee a transmission of real-time periodic and sporadic data within the limited time frame in factory environment. The superframe of IEEE 802.15.4 is used for the dynamic transmission method of real-time mixed traffic (periodic data, sporadic data, and non real-time message). By separating CFP and CAP properly, the periodic, sporadic, and non real-time messages are transmitted effectively and guarantee real-time transmission within a deadline. The simulation results show the improvement of real-time performance of periodic and sporadic data at the same time.

• Asia pacific journal of information systems
• /
• v.12 no.4
• /
• pp.193-213
• /
• 2002

The sales activity of most of small manufacturing companies is based on orders of buyers. The process of promotion, negotiation, receipt and selection of orders of the manufacturers is closely coupled with the load status of the production lines. The decision on whether to accept an order or not, or the selection of optimal order set among excessive orders is entirely dependent on the schedule of production lines. However, in the real world, since the production scheduling activity is mainly performed by human experts, most of small manufacturers are suffer from being unable to meet due dates, lack of rapid decision on the acceptance of new order. Recently, Internet based Electronic Commerce is recognized as one of the alternatives for strengthening sales power of small and medium companies. However, small and medium manufacturers can't adjust properly to the new environment because they are in short of money, personnel, and technology. To cope with this problem, this paper deals with development of part sales agent coupled with virtual manufacturing in Internet environment that consist of selection agent, advertisement agent, selection agent, negotiation agent, and virtual manufacturing system. This paper develops a time-bounded negotiation mechanism for small and medium manufacturers in agent-based automated negotiation between customers and negotiation agents. Furthermore, to select optimal order set maximized profit, we first formulate the order selection problem with mixed integer programming, but the computation time of IP is not acceptable for real world scale problem. To overcome this problem and dynamic nature of virtual manufacturing, we suggest a genetic algorithm approach, which shows a reasonable computation time for real world case and good incremental problem solving capability.

• Journal of Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.67-79
• /
• 1998

In this paper, we present the design and analyze the transmission rate of a control algorithm for the client buffer on the VOD systems. The design is based on the server's data transmission rate and clients' data consumption rate. The proposed algorithm stabilizes the client's buffer by reducing the oscillation phenomena of the buffer. And it uses the BCT (Buffer Check Time) to reduce the scheduling load of the client system. The client's data consumption rate and the buffer size are calculated on the basis of BCT. In case that the predicted buffer size operates in the overrun or starvation the buffer. As the load fluctuation of the network, the transmission rate control policy cannot stabilize the client's buffer alone. The media scaling policy, therefore, also performs its complementary part in stabilizing the client's buffer, and performance evaluation of the proposed algorithm is provided through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1597-1601
• /
• 2013

Multiple antenna technique is attracting attention as a core technology for next-generation mobile communication systems to accommodate explosively increasing mobile data traffic. Especially, recent researches focus on multi-user multiple input multiple output (MU-MIMO) system where base stations are equipped with several tens of transmit antennas and transmit data to multiple terminals (users) simultaneously. To enhance the performance of MU-MIMO systems, we, in this paper, propose an adaptive user selection algorithm which adaptively selects a user set according to varying channel states. According to Monte-Carlo based computer simulations, the performance of proposed scheme is significantly improved compared to the conventional scheme without user selection and approaches that of exhaustive search-based optimal scheme. On the other hand, the proposed scheme can reduce the computational complexity to $K/(2^K-1)$ compared to the optimal scheme where K denotes the number of total users.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1464-1473
• /
• 2000

In this paper, we analyze the cycle property of the (n,k)-star graph that has an attention as an alternative interconnection network topology in recent years. Based on the graph-theoretic properties in (n,k)-star graphs, we show the pancyclic property of the graph and also present the corresponding algorithm. Based on the recursive structure of the graph, we present such top-down approach that the resulting cycle can be constructed by applying series of "dimension expansion" operations to a kind of cycles consisting of sub-graphs. This processing naturally leads to such property that the resulting cycles tend to be integrated compactly within some minimal subset of sub-graphs, and also means its applicability of another classes of the disjoint-style cycle problems. This result means not only the graph-theoretic contribution of analyzing the pancyclic property in the underlying graph model but also the parallel processing applications such a as message routing or resource allocation and scheduling in the multi-computer system with the corresponding interconnection network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1045-1053
• /
• 2012

Link-16 is a widely used TDL (Tactical Data Link) which uses TDMA (Time Division Multiple Access). Link-16 is a very low rate system, so it supports small size of data like tactical message and voice. However, there are related works to transmit situation awareness information like image due to the increasing interest about EBO(Effect-Based Operation), recently. Special TDMA scheduling is needed not static TDMA of Link-16 for image transmission because image data has much larger size than the existing tactical data. In this paper, we proposed Link-16K which enhances the Link-16 MAC. The proposed Link-16K is compatible with Link-16, and includes dynamic TDMA, new packing method, and an efficient retransmission scheme for image transmission effectively. We can see that image transmission delay is reduced and channel utilization is increased through simulation results of proposed idea.