• 수산해양기술연구
• /
• 제44권1호
• /
• pp.37-45
• /
• 2008

Assessment and management of fisheries abundance in fresh water like a river or a lake is very important to maintain fisheries itself as well as tourist industry even if their scale is not much large. The species for catch in fresh water are mainly a mandarin fish, a carp, an eel, and others. Because oriental river prawn is a main prey of these species and the change in its abundance is directly related to their abundance change in fresh water, information on the abundance and distribution of the species are necessary. Hydroacoustic survey is known to one of the efficient method among several methodology. Information on acoustic target strength is key parameter to estimate abundance for acoustic survey. In this study, measurements on oriental river prawn, Macrobrachium koreana, were conducted for two high frequencies(200kHz and 420kHz) with tilt angle using automatic rotating system. The results of acoustic target strength obtained from the experiment were compared with those of acoustic scattering model, Distorted Wave Born Approximation(DWBA) model. For 200kHz, the result of acoustic target strength experiments was expressed in terms of the averaged target strength dependence on the body langth(BL, cm) as a following relationship; < $TS_{200kHz}$ > = 45.9log(BL) - 107.4. These results provide basic information for studying acoustic target strength and conducting acoustic survey of oriental river prawn.

• Ocean and Polar Research
• /
• 제37권4호
• /
• pp.333-340
• /
• 2015

The contrast (fish body to medium ratio) of density and sound speed were measured to estimate acoustic scattering from small juvenile cod (Gadus macrocephalus) with the Kirchhoff-Ray Mode backscatter model. The density contrast was measured by the density-bottle method and the sound speed contrast was estimated by the time of flight method. The results revealed that the measured density contrasts of juvenile cod varied between 1.003 and 1.029 (mean = 1.014, S.D. = 0.01). On the other hand, sound speed contrasts varied between 1.039 and 1.041 (mean = 1.041, S.D. = 0.001). The relationship between averaged target strength (TS) and total length (TL) established by the model were <$TS_{38kHz}$> = 20log(TL) - 68.8 and <$TS_{38kHz}$> = 20log(TL) - 69.4, respectively.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.824-829
• /
• 2015

The rotary type testing machine undergoes mechanical stress as an external force is applied. In case of the rotary type testing machine, even a tiny flaw results in a fatal demage because the size of the machine is huge. Therefore, when designing the rotary type testing machine, it is necessary to secure a safety factor with the mechanical stress analysis in order to prevent the machine from being destroyed due to scattering or transformation of rotating field. This thesis proposes a LSM rotary type tesitng machine which rotates at the speed of up to 600km/h. And the mechanical stress is considered in order that the safety factor remains above 1.5 at the maximum speed. In addition, because normal force as well as thrust occurs in the machine, the normal force exerted was considered through the strength analysis. Finally, a design plan which enables to weaken the normal force affecting the rotary type testing machine is introduced and its validity is proved by the results of FEM analysis.

• 한국음향학회지
• /
• 제28권1호
• /
• pp.10-18
• /
• 2009

이동하는 수상 운동체는 반경 $8{\sim}200{\mu}m$ 크기의 미세기포군을 포함하는 기포항적을 발생시킨다. 경우에 따라 10여분 이상 지속되는 수중 미세기포는 음향산란을 일으키는 요인이 되며, 기포가 존재하는 동안 능동소나에 의한 지속적인 탐지가 가능하다. 본 논문에서는 기포항적에 존재하는 미세기포의 사공간적인 분포변화에 따라 산란되는 음파를 모의하는 잔향음 모델을 제시하였다. 기포항적 산란신호의 모델은 음향학적 모델과 운동학적 모델로 이루어져 있으며 음향학적 모델에서는 미세기포의 공간분포를 체적산란강도로 변환하여 공간에 대한 적분을 수행하고, 운동학적 모델은 해양공간의 고정좌표계와 능동소나에 고정된 국부좌표계 사이의 좌표변환을 위한 오일러변환을 기반으로 구현되었다. 구현된 모델의 점증을 위해 2007년 9월 한국해양대학교 앞 해상에서 실제 선박을 운항하여 기포항적을 발생시킨 후 일정간격으로 신호를 획득하여 분석하였고, 이를 모델에 적용하여 타당성을 검증하였다.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.295-301
• /
• 2015

Target strength (TS) information is an important parameter that estimates the detection, distribution, and abundance of Aurelia aurita. In order to investigate the biological TS of jellyfish, some factors such as size (bell diameter), tilt angle, pulsation, and symbion should be known. In the ex situ TS measurements, the tilt angles and pulsation from synchronized swimming behavior of four live A. aurita (bell diameters in the air: 54.2 ~ 94.2 mm) were measured with the acoustic data at 70 kHz. The reduced target strength (RTS) of A. aurita was found to change ranged from 13.4 ~ 16.5 dB according to the incidence angles from $-30^{\circ}$ to $24^{\circ}$. When the change rate of bell diameter in the water was 0.2, the TS value showed a 7.2 dB change. These results could be utilized as an important data to understand the acoustic characteristic scattering of A. aurita.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.683-690
• /
• 2003

The high strength low alloy(HSLA) steels microalloyed with Nb, Ti and V have been widely used as the automobile parts to decrease weight of vehicles. The effects of process conditions are investigated in the aspects of the precipitation behavior and the mechanical properties of HSLA steel microalloyed with Nb and Ti using TEM, SANS and mechanical testing. When Ti was added to a 0.07C-1.7Mn steel which was coiled at $500^{\circ}C$, the specimen revealed the property of higher tensile strength of 853.1 MPa and the stretch-flangeability of 60%. The stretch-flangeability was increased up to 97.8% for coiling temperature above $700^{\circ}C$. The precipitation hardening cannot be achieved in the 0.045C-1.65Mn steel which was the lower density of fine precipitates. However, the 0.07C-1.7Mn steels containing Nb and/or Ti which was coiled at X$/^{\circ}C$ have a high precipitates density of $2${\times}$10^{ 5}$/$\mu$㎥. The high strength of these steels was attributed to the precipitation hardening caused by a large volume froction of (Ti, Nb)C precipitates with a size below 5 nm in ferrite matrix.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.275-280
• /
• 2011

This paper focuses on reliability prediction of long-term creep strength for Modified 9Cr-1Mo steel (Gr. 91) which is considered as one of the structural materials of next generation reactor systems. A "Z-parameter" method was introduced to describe the magnitude of standard deviation of creep rupture data to the master curve which can be plotted by log stress vs. The larson-Miller parameter (LMP). Statistical analysis showed that the scattering of the Z-parameter for the Gr. 91 steel well followed normal distribution. Using this normal distribution of the Z-parameter, the various reliability curves for creep strength design, such as stress-time temperature parameter reliability curves (${\sigma}$-TTP-R curves), stress-rupture time-reliability curves (${\sigma}-t_{r}-R$ curves), and allowable stress-temperature- reliability curves ([${\sigma}$]-T-R curves) were reasonably drawn, and their results are discussed.

• Composites Research
• /
• 제19권3호
• /
• pp.7-14
• /
• 2006

본 논문에서는 내압 하중을 받는 복합재 압력 용기의 신뢰도를 구하기 위해 확률적 강도 해석이 수행되었다. 이때 확률적 강도 해석은 점진적 파손 모델과 몬테카를로 시뮬레이션으로 구성된 확률 연속 파손 모델과 상용 유한 요소 해석 코드인 ABAQUS가 연계한 형태로서 복잡한 형상 및 경계 조건을 갖는 복합재 구조물의 확률적 파손 해석을 수행하게 된다. 설계확률 변수로서 복합재 층의 각 방향 별 강도가 고려되었다. 최종적으로, 확률 강도 해석을 통해 복합재 압력 용기의 파열 압력 분산 현상이 설명되었고, 복합재 압력 용기의 각 부위별 신뢰도 값이 제시되었다. 양산 중인 복합재 구조물인 경우, 재료 및 제작 공정의 불확실성이 구조물 성능에 미치는 영향이 더욱 커지게 되어 확률 강도 해석을 이용한 구조 설계가 필수적이다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.85-93
• /
• 1992

The only hardness of 2nd phase of martensite in dual phase steel which was composed of the martensite and ferrite was changed. Fatigue test was conducted by cantilever type of self-made rotated bending fatigue testing machine. The corrosion fatigue fracture behaviors of dual phase steel were investigated in 3% NaCl solution at $N_f$ = $1.5\times$$10^5$ $N_f$=1.0 $\times$ $10^6$ cycles. The fatigue strength was increased with increasing the hardness of 2nd phase. The size and number of corrsion pits were influenced by the 2nd phase hardness and pits remain constant in size just after they were transited into cracks. The life of crack initiation was effected by stress level. The shape of relation of $\Delta$K and da/dn has smaller scattering in it in 3% NaCl solution than that in air. The higher the 2nd phase hardness is, the higher the corrosion fatigue life becomes. Corrosion fatigue fracture behavior was effected by mechanics in case of $N_f$=1.5$\times$10$^5$$N_f$=1.5$\times$10$^6$ cycles.