• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.105-113
• /
• 2014

Spray and combustion process with waste cooking oil (WCO) biodiesel and commercial diesel were analyzed in an optically-accessible single-cylinder compression ignition diesel engine equipped with a high pressure common-rail injection system. Direct imaging method was applied to investigate spray and combustion characteristics. From the mie-scattering results, it was verified that WCO biodiesel had a longer injection delay compared to diesel. Spray tip penetration length of WCO biodiesel was longer and spray angle was narrower than those of diesel due to poor atomization characteristics. In terms of combustion, WCO biodiesel showed later start of combustion, while flame was vanished more rapidly. Analysis of flame luminosity showed that WCO biodiesel combustion had lower intensity and lasted for shorter duration.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.123-128
• /
• 2002

이중동축류 버너를 사용하여 에틸렌/프로판 및 에틸렌/메탄 혼합 연료의 매연생성 상승효과와 관련된 매연생성 메커니즘을 이해하기 위한 실험을 수행하였다. 매연체적분율, 광산란신호 및 PAH 형광신호를 측정한 결과 다음을 알 수 있었다. 에틸렌/프로판 혼합연료에서 연료공급 위치의 변화에 따른 매연생성특성의 변화는 대부분 synergistic 효과와 관련되는 것임을 알 수 있었다. 그러나 에틸렌/메탄 혼합연료의 경우 연료공급의 위치변화가 매연생성에 크게 영향을 주지 않았다. PAH 분포는 synergistic 효과에 의한 매연 생성 특성의 변화와 일관성이 없는 것이 관찰되었다. 따라서 synergistic 효과에 대한 PAH의 역할에 대한 이해가 필요함을 알 수 있었다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.13-20
• /
• 2015

The self-cleaning properties of nano-zinc oxide on cotton fabrics have been investigated. The cotton fabric has been prepared by pad-dry method. The nano-zinc oxide was encapsulated in the polystyrene particle by mini-emulsion process prior used. The loading amount of zinc oxide particles into the mini-emulsion were various from 1% wt to 40%wt. The particles sizes of ZnO-encapsulated polystyrene mini-emulsion were determined using dynamic light scattering. It was showed that the particle size of the mini-emulsion was in the range of 124-205 nm. The topography and morphology of ZnO-encapsulated polystyrene which coated on cotton fabrics was observed using scanning electron microscopy. The crystal structure of ZnO-coated on cotton fabrics was explored by X-ray diffraction spectroscopy. The photocatalytic activities of zinc oxide were present through the self-cleaning properties. The presents of the zinc oxide on cotton fabrics significantly showed the improving of the self-cleaning properties under UV radiation.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.21-27
• /
• 2012

The optical diffuser for direct-lit LED backlight unit was prepared by using extrusion compounding followed by thermoforming process. Poly(methyl methacrylate) (PMMA) with superior optical characteristics and polycarbonate (PC) with good thermal property were used as base resins, and crosslinked polystyrene (PS) and PMMA beads as diffusing agents were incorporated into resin matrix to derive light scattering and diffusing action. In the compounded plate, the diffusing beads were observed to be dispersed uniformly and distinctly in the continuous phase. The inclusion of polymeric beads up to 3 wt% substantially enhanced the optical characteristics such as luminance, luminance uniformity, haze for the diffuser. Two different diffusers of PC and PMMA-based compound with various compositions were compared in terms of measured optical, thermal, and mechanical properties, which would be expected to be utilized for the industrial application of LED backlight unit.

• 한국광학회지
• /
• 제12권4호
• /
• pp.251-256
• /
• 2001

Mach-Zehnder 간섭계에 매개하향변환과정에서 발생한 광자쌍을 입사시켰을 때 두광자의 상관관계가 간섭계의 분해능에 미치는 영향을 Bayes 정리에 근거한 전산 시늉으로 분석하였다. 발생과정에서 두광자는 100%의 상관관계를 가지지만 진행중에 반사, 흡수, 산란 등에 의해 소멸되므로 상관관계가 감소하고, 이러한 상관관계의 감소는 간섭계의 위상분해에 있어서 저하를 가져오는 주요 요인이되며, 또한 간섭계의 분해능은 검출기의 양자효율에 관련됨을 확인하였다. 전산시늉으로 얻은결과, 간섭계의 위상치가 적을수록 위상정밀도는 좋아지고 위상차가 증가할수록 위상의 불확정도는 점점 증가하는 경향을 나타내었다.

• 한국자기학회지
• /
• 제22권3호
• /
• pp.73-78
• /
• 2012

본 연구에서는 Argyres-Sigel의 투영 연산자 방법을 단일 벽 탄소 나노튜브(SWNT)의 zigzag(10,0)에 직접 적용하여 이를 운동방정식의 형태로 만들어 선모양 함수를 구하는 방법을 사용하였다. 선모양 함수의 실수 부분인 선 너비는 저온 영역(T < 200K)에서 온도의 영향에 거의 무관한 것으로 조사되었다. 이는 온도에 관여하는 페르미-디랙 분포함수가 선모양 함수에 거의 영향을 작용하지 않기 때문인 것으로 생각된다. 고온 영역(T > 200K)에서는 선 너비가 다소 단조롭게 증가하는 것으로 나타났으며, 이는 음향 포논의 영향에 기인하는 것으로 보인다. 그리고 SWNT의 전자스핀이완 시간은 $1.4{\times}10^{-6}\;s$으로 계산되었다.

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2000년도 24회 정기총회 및 43회 학술발표회
• /
• pp.12-21
• /
• 2000

The smoke from a burning cigarette is classified as mainstream, which is the smoke inhaled by the smoker during a puff, and sidestream, which is defined by ISO 10185 as all smoke which leaves a cigarette during the smoking process other than from the butt end. Most of the sidestream smoke is generated during static burn, that is, in between puffs. The amount of sidestream smoke generated by a cigarette depends on the cigarette construction, tobacco blend, and properties of the cigarette paper, The main paper properties affecting sidestream smoke generation are: porosity, basis weight, type and amount of filler, type and amount of burn additive.Sidestream smoke is composed of a visible phase (small liquid droplets) and an invisible phase (gaseous molecules). This paper focuses on the visible portion of the sidestream smoke. Optical methods, which are based on the relationship between light scattering and density of the rising plume of smoke, have been used successfully by the industry. However, the present trend is to use gravimetric methods where the particulate matter is captured on a Cambridge(R) filter pad and weighed. The gaseous portion of the sidestream smoke, which does not contribute to the visible sidestream smoke, passes through the Cambridge filter pad.Sidestream smoke reduction is achieved by modifying certain mass transport processes occurring in a smoldering cigarette. There are four main pathways for reducing sidestream smoke: A) less tobacco burned, B) slower rate of tobacco combustion, C) more efficient trapping of smoke by the cigarette paper, and D) more complete combustion of tobacco. This paper discusses how the physical properties of paper and cigarette construction affect sidestream smoke reduction via the above four mechanisms.

• 대기
• /
• 제14권2호
• /
• pp.11-22
• /
• 2004

A technique on atmospheric correction algorithm to the multi-band reflectance of Landsat TM imagery has been developed using an atmospheric radiation transfer model for eliminating the atmospheric and surface diffusion effects. Despite the fact that the technique of satellite image processing has been continually developed, there is still a difference between the radiance value registered by satellite borne detector and the true value registered at the ground surface. Such difference is caused by atmospheric attenuations of radiance energy transfer process which is mostly associated with the presence of aerosol particles in atmospheric suspension and surface irradiance characteristics. The atmospheric reflectance depend on atmospheric optical depth and aerosol concentration, and closely related to geographical and environmental surface characteristics. Therefore, when the effects of surface diffuse and aerosol reflectance are eliminated from the satellite image, it is actually corrected from atmospheric optical conditions. The objective of this study is to develop an algorithm for making atmospheric correction in satellite image. The study is processed with the correction function which is developed for eliminating the effects of atmospheric path scattering and surface adjacent pixel spectral reflectance within an atmospheric radiation model. The diffused radiance of adjacent pixel in the image obtained from accounting the average reflectance in the $7{\times}7$ neighbourhood pixels and using the land cover classification. The atmospheric correction functions are provided by a radiation transfer model of LOWTRAN 7 based on the actual atmospheric soundings over the Korean atmospheric complexity. The model produce the upward radiances of satellite spectral image for a given surface reflectance and aerosol optical thickness.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.49.3-49.3
• /
• 2009

Geostationary Ocean Colour Imager (GOCI) is the first ocean color instrument that will be operating in a geostationary orbit from 2010. GOCI will provide the crucial information of ocean environment around the Korean peninsula in high spatial and temporal resolutions at eight visible bands. We report an on-going development of imaging and radiometric performance prediction model for GOCI with realistic data for reflectance, transmittance, absorption, wave-front error and scattering properties for its optical elements. For performance simulation, Monte Carlo based ray tracing technique was used along the optical path starting from the Sun to the final detector plane for a fixed solar zenith angle. This was then followed by simulation of red-tide evolution detection and their radiance estimation, following the in-orbit operational sequence. The simulation results proves the GOCI flight model is capable of detecting both image and radiance originated from the key ocean phenomena including red tide. The model details and computational process are discussed with implications to other earth observation instruments.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.593-608
• /
• 2015

In many of the industrialized countries an increasing amount of infrastructure is ageing. This has become specifically critical to bridges which are a major asset with respect to keeping an economy alive. Life of this infrastructure is scattering but often little quantifiable information is known with respect to its damage condition. This article describes how a damage tolerance approach used in aviation today may even be applied to civil infrastructure in the sense that operational life can be applied in the context of modern life cycle management. This can be applied for steel structures as a complete process where much of the damage accumulation behavior is known and may even be adopted to concrete structures in principle, where much of the missing knowledge in damage accumulation has to be substituted by enhanced inspection. This enhanced and continuous inspection can be achieved through robotic systems in a first approach as well as built in sensors in the sense of structural health monitoring (SHM).