• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1452-1457
• /
• 2018

Inclusion of the ground state of $^{16}O$ is investigated for a study of elastic ${\alpha}-^{12}C$ scattering for the l = 0 channel at low energies in effective field theory. We employ a Markov chain Monte Carlo method for the parameter fitting and find that the uncertainties of the fitted parameters are significantly improved compared to those of our previous study. We then calculate the asymptotic normalization constants of the $0^+$ states of $^{16}O$ and compare them with the experimental data and the previous theoretical estimates. We discuss implications of the results of the present work.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.65-74
• /
• 1996

in this paper, the propagation characteristics of the dominant modes in multiple coupled microstrip lines on a magnetized ferrite substrate are analyzed. The propagation constants and characteristic impedances are calculated by using the spectral domain method. With the numerical results, multi-port impedance parameters as well as scattering parameters are derived from nonreciprocal transmission line equations which are consistent with conventional transmission line theory. In additon, the numerical resutls of nonreciprocal characteristics for various values of structural, material parameters, and external magnetic fields are also presented.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.162-172
• /
• 1998

A numerical study of premixed combustion within a porous ceramic burner (PCB) is performed to understand flame behavior with respect to various model parameters. Basic flame structure within the porous ceramic burner and species profiles such as NO and CO are examined. Sensitivity analysis of flame speed, gas and solid temperature, NO and CO emission from the burner with respect to reaction steps and various physical properties of the ceramic material is applied to find the most significant parameters in selection of porous materials for the porous ceramic burner. Effects of thermal conductivity, extinction coefficient and scattering albedo on the burner characteristics are studied through the sensitivity analysis. The results of sensitivity study reveal the order of importance in ceramic material properties to get suitable burner performance. Scattering albedo, which governs the ratio of absorbed energy by the ceramic material to total radiative energy transferred, is one of the most important parameters in the material properties since it affects the actual absorbed radiation rate and thus it largely affects the flame structure. Through the study, it is found that the sensitivity study can be used to estimate the flame behavior within the porous ceramic burner more effectively.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1324-1330
• /
• 2018

The elastic scatterings for the ${\alpha}+^{40}Ca$ and the ${\alpha}+^{58}Ni$ systems at $E_{lab}=240MeV$ have been analyzed within the framework of the Coulomb-modified Glauber model using two kinds of Gaussian density parameters for the target nuclei. The first one is to use Gaussian density parameters obtained from the root-mean-square radius. The second one is to use parameters calculated by matching the Gaussian density to the two-parameter Fermi density. The results with surface-matched Gaussian densities provide reasonable agreement with the experimental data, but the results without matching do not. The oscillatory structures observed in the angular distributions of both system can be interpreted as being due to the strong interference between the near-side and the far-side scattering amplitudes. The differences between the phase shifts obtained from the two methods are examined. We also investigate the effect of these differences on the differential and reaction cross sections, the transmission functions and the strong absorption radii.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.17-35
• /
• 1994

A semi-empirical model for microwave polarimetric radar backscattering from bare soil surfaces was developed using polarmetric radar measurements and the knowledge based on the theoretical and numerical solutions. The microwave polarimetric backscatter measurements were conducted for bare soil surfaces under a variety of roughness and moisture conditions at L-, C-, and X-band frequencies at incidence angles ranging from 10` to 70`. Since the accrate target parameters as well as the radar parameters are necessary for radar scattering modeling, a complete and accurate set of ground truth data were also collected using a laser profile meter and dielectric probes for each surface condition, from which accurate measurements were made of the rms height, correlation length, and dielectric constant. At first, the angular and spectral dependencies of the measured radar backscatter for a wide range of roughnesses and moisture conditions are examined. Then, the measured scattering behavior was tested using theoretical and numerical solutions. Based on the experimental observations and the theoretical and numerical solutions, a semi-empirical model was developed for backscattering coeffients in terms of the surface roughness parameters and the relative dielectric constant of the soil surface. The model was found to yield very good agreement with the backscattering measurements of this study as well as with independent measurements.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.102-108
• /
• 2011

The study of wave propagation and scattering in biological media has become increasingly important in recent years. The propagation of light within tissues is an important problem that confronts the dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. In the clinical application of photodynamic therapy(PDT) and in photobiology, the photon deposition within a tissue determines the spatial distribution of photochemical reactions. Scattered light is measured as a function of the distance (r) between the axis of the incident beam and the detection spot. Consequently, knowledge of the photosensitizer(Chlorophyll-a) function that characterizes a phantom is measured. To obtain the results of scattering coefficients(${\mu}s$) of a turbid material from diffusion described by experimental approach. It was measured the energy fluency of photon radiation at the position of penetration depth. From fluorescence experimental method obtained the analytical expression for the scattered light as the values of $(I/I_o)_{wavelength}$ vs the distance between the center of the incident beam and optical fiber in terms of the condition of "in situ spectroscopy(optically thick)" and real time by fluorometric measurements. The result was compromised with transport of intensities though a random distribution of scatters.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.183-193
• /
• 2007

Analytic solutions are derived for wave scattering by a semi-infinite breakwater or a breakwater gap with partially reflective front and fully reflective back. The water depth is constant and a regular wave train is normally incident to the breakwater. Wave scattering is studied based on the linear potential wave theory. The governing equation is transformed into ordinary differential equation by using the method of variation of parameters and coordinate transformation. Comparison with finite element numerical solution shows that the analytic solution obtained in this paper gives quite good results. Using the analytic solution, the tranquility of harbor entrance is investigated by changing the reflection coefficient at the breakwater.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.330-338
• /
• 2015

The influences of fluorescence, scattering, and flocculation in turbid material by light scattering of N-propyl-N,N-dimethylethanolamine, fluorescence agent and absorption agent were interpreted for the scattered fluorescence intensity and wavelength. They have been studied the molecular properties by the spectroscopy of laser induced fluorescence (LIF) and flocculation. The effects of optical properties in scattering media have been found by the optical parameters(${\mu}_s$, ${\mu}_a$, ${\mu}_t$). Flocculation is an important step in many solid-liquid separation processes and is widely used. When two particles approach each other, interactions of several colloid particles can come into play which may have major effect on the flocculation and LIF process. The values of scattering coefficient ${\mu}_s$ are large by means of the increasing scattering of scatterer, The values have been found that the slope decays exponentially as a function of concentration from laser source to detector by our experimental result. It may also aid in designing the best model for oil chemistry, bio-pharmaceutical, laser medicine and application of medical engineering on LIF and coagulation in particle transport mode.

• Journal of Ecology and Environment
• /
• v.36 no.1
• /
• pp.65-71
• /
• 2013

The concentration of airborne pollen is related to meteorological parameters. The main purpose of this study was to determine the correlation between airborne pollen and meteorological parameters in Ulsan based on sampling from 2010 to 2011. The primary factors of interest were differences in the pollen scattering start date, end date, and peak date, and the fluctuations in pollen concentration. The meteorological parameters that affected the start and peak dates of the pollen season were as follows. For Pinus and Alnus, the dates were correlated with sunshine and an increase in temperature, whereas for Quercus, the dates were correlated with increasing temperature. During the pollen season, Alnus peaked when the temperature was highest and Pinus peaked when the relative humidity was lowest. The concentration of airborne pollen was correlated with meteorological parameters during the sampling period as follows: Pinus, Alnus, and Humulus pollen concentrations were positively correlated with increasing temperature and negatively correlated with rainfall and relative humidity; Humulus pollen concentration was positively correlated with sunshine; and Quercus and Humulus pollen concentrations were positively correlated with wind speed.