• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.69-69
• /
• 2003

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed energy. The visible light photons are converted into an electric signal in the amorphous silicon photodiode. In order to produce good quality images, we need to understand the detailed behavior of DR detectors in radiation. We, therefore, investigated the relationship between DR outputs and X -ray in terms of absorbed energy, using the SPEC-78, X-ray energy spectrum model. We calculated the total filtration of X-ray equipment measuring air exposure and this value was used in the calculation of absorbed energy. The relationship between DR output and the absorbed energy of the X-ray was obtained by matching the absorbed energy with pixel values of real images under various conditions. It was found that the relationship between these two values was almost linear. The results were verified using phantoms made of water and aluminium. The pixel value of the phantom image was estimated and compared with previous results under various conditions. The estimated pixel value coincided with the results, although the effect of scattered photons introduced some errors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.519-526
• /
• 2018

In order to analyze space resources, it had to be brought to earth. However, using laser-induced breakdown spectroscopy(LIBS) and Raman spectroscopy, it is possible to analyze qualitative and quantitative analysis of space minerals in real time. LIBS is a spectroscopic method in which a high energy laser is concentrated on a material surface to generate a plasma, and the emitted light is acquired through a spectroscope to analyze the atomic composition. Raman spectroscopy is a spectroscopic method that analyzes the molecular structure by measuring scattered light. These two spectroscopic methods are complementary spectroscopic methods for analyzing the atoms and molecules of unknown minerals and have an advantage as space payloads. In this study, data were analyzed qualitatively by using principal component analysis(PCA). In addition, a mixture of two minerals was prepared and a quantitative analysis was performed to predict the concentration of the material.

• Korean Journal of Oriental Medicine
• /
• v.11 no.2
• /
• pp.141-154
• /
• 2005

The following is a taxonomic list of the specific features of external and internal shape and pattern analysis of Paeonia lactiflora PALL. and P. obovata MAX as the standard of herbal medicine. 1. External shape of original plant P. lactiflora has lancelate and elliptical leaves with no hair on both sides. It bears a flower bud at the shoot apex or leaf axil. On the other hand, P. obovata has obovate leaves with hair on the back side. It has a single flower bud at the shoot apex. 2. Physical characteristics of herbal states P. lactiflora has a bright and smooth external surface whose color is light red brown, light gray on its section and it is not easy to cut. On the other hand, P. obovata has a coarse external surface whose color is dark brown, pinkish on its section and it is easy to cut. 3. Physical characteristics of herbal state in currents Paeonia Radix Alba is brown on the external surface, and whitish on its section. On the other hand, Paeonia Radix Rubra is dark brown on the external surface, and yellowish-white on its section. 4. Internal characteristics Internal shape is correspond to that of Paeonia Radix described in literatures. Only P. lactoflora has a concentrated vascular bundle toward centeral cylinder. On the other hand, P. obovata has a scattered vascular bundle at the cortex. 5. Physicochemical pattern by HPLC Both P. lactoflora and P. obovata showed the same pattern. Paeoniforin, a main component, appears upon 13.68 in retention time (Rt) in both. In addition, both contain a large amount of paeoniflorin. Such results will, in the future, be used as basic source for the additional research, such as biological reactions and genetic discrimination.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.473-479
• /
• 2012

The influences of scatterer and absorber in turbid material by light scattering were interpreted for the scattered intensity and wavelength. The molecular properties have been studied by Monte Carlo simulation in resin of New Austria Tunnel Method. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(${\mu}_s$, ${\mu}_a$, ${\mu}_t$). Monte Carlo Simulation method for modelling of light transport in the civil engineering and construction field was applied. The results using a phantom were discussed that the distance from source to detector is closer, and scattering intensity is stronger with those obtained through Monte Carlo Simulation. It may also aid in designing the best model for coatings and corrosion for the durability of metal constructions.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.27.3-28
• /
• 2008

In this study, we report a new Monte Carlo ray tracing technique for estimating GOCI (Geostationary Ocean Color Instrument) radiative transfer characteristics and imaging performance simultaneously. First, a full scale GOCI optical model was constructed with measured characteristics at the component level and placed in the geostationary orbit. An optical model of approximated GOCI target area centered at the Korean penninsular was then built using the USGS coastal line data and representative land and sea surface reflectivity data. The light rays launched from a simulated sun model travel to the Earth surface, where they are reflected and scattered. Some of the light rays that are headed to the GOCI model in the orbit were selected and traced, as they have entered into the GOCI aperture. As they pass through each GOCI optical part, the ray path and intensity are adjusted according to the measured characteristics for reflection, transmission, refractive index and surface scattering. The ray-traced imaging and radiative transfer performance indicators confirm that the computer generated GOCI optical system with measured characteristics can be used for in-orbit operation simulation following the designed measurement sequence. The computational technique and its implications as a operation support tool are discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.157-163
• /
• 2013

In this paper, we propose a human detection technique using thermal imaging camera. The proposed method is useful at night or rainy weather where a visible light imaging cameras is not able to detect human activities. Under the observation that a human is usually brighter than the background in the thermal images, we estimate the preliminary human regions using the statistical confidence measures in the gray-level, brightness histogram. Afterwards, we applied Gaussian filtering and blob labeling techniques to remove the unwanted noise, and gather the scattered of the pixel distributions and the center of gravities of the blobs. In the final step, we exploit the aspect ratio and the area on the unified object region as well as a number of the principal components extracted from the object region images to determine if the detected object is a human. The experimental results show that the proposed method is effective in environments where visible light cameras are not applicable.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.122-128
• /
• 2012

The influences of fluorescence, scattering, and flocculation in turbid material by light scattering of L-aspartic acid, preservative and emulsifier were interpreted for the scattered fluorescence intensity and wavelength. They have been studied the molecular properties by the spectroscopy of laser induced fluorescence (LIF) and flocculation. The effects of optical properties in scattering media have been found by the optical parameters(${\mu}_s$, ${\mu}_a$, ${\mu}_t$). Flocculation is an important step in many solid-liquid separation processes and is widely used. When two particles approach each other, interactions of several colloid particles can come into play which may have major effect on the flocculation and LIF process. The values of scattering coefficient ${\mu}_s$ are large by means of the increasing scattering of scatterer, The values have been found that the slope decays exponentially as a function of concentration from laser source to detector by our experimental result. It may also aid in designing the best model for oil chemistry, bio-pharmaceutical products, laser medicine and application of medical engineering on LIF and coagulation in particle transport mode.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.251-257
• /
• 2013

The influences of Methotrexate as fluorophor, scatterer, absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by laser induced fluorescence spectroscopy. It has been found that the effects of optical properties in scattering media by the optical parameters((${\mu}_s$, ${\mu}_a$, ${\mu}_t$). The value of scattering coefficient ${\mu}_s$ is large by means of the increasing particles of L-${\alpha}$-Phosphatidylcholine, it has been found that the slope decays exponentially as a function of depth from laser source to detector. It may also aid in designing the best model for oil chemistry, laser medicine and application of medical engineering.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.87-109
• /
• 1998

The present study was designed to elucidate the effects of the Co-60 γ irradiation and/or calcium­deficient diet on the dentin and cementum formation of rat molar. The pregnant three-week old Sprague­Dawley rats were used for the study. The experimental group was divided into two groups, irradiation/normal diet group and irradiation/calcium-deficient diet group. The control group was non­irradiation/normal diet group. The abdomen of the rats at the 19th day of pregnancy were irradiated with single absorbed dose of 350cGy. The rat pups were sacrificed on the 14th day after delivery and the maxillae including molar tooth germ were taken. The specimens including the 1st molar tooth germ were prepared to make tissue sections for light and transmission electron microscopy. Some of tissue sections for light microscopy were stained immunohistochemically with anti-fibronectin antibody. The results were as follows; 1. The Hertwig's epithelial root sheath cells, which are related to the differentiation of the tooth-forming cells, showed irregular cellular arrangement, decrease of intercellular junctional complex, and decreased immunoreactivity to the fibronectin after irradiation. These were more severe in the irradiation/calcium-deficient diet group. 2. The cementoblasts at the cementum-forming area showed chromatin clumpings after irradiation. The immu noreactivity to the fibronectin was weaken after irradiation, especially irradiation/calcium-deficient diet group. 3. The odontoblasts at the dentin-forming area showed increase of lysosomes in the cytoplasm and destruction of intercellular junctional complex. The irradiation/calcium-deficient diet group showed decrease of number and density of the electron dense particles and a large number of vacuoles scattered in the dentin matrix. The immunoreactivity was weaken.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.339-344
• /
• 2000

The mucociliary system is one of the most important airway defense mechanisms in human body and impairment of ciliary movement results in various diseases in respiratory tract. In this study, we have developed a system that can measure ciliary movement in vivo and quantified ciliary beat frequency (CBF) through autoregressive (AR) power spectrum. To measure the frequency in vivo, we applied a photoelectric method that was composed of a laser light and a fiber optic probe. Scattered signals are transferred to a PC in which they are displayed on the monitor and its CBF is determined by the AR method in were acquired. For 8 normal subjects, the analyzed CBFs ranged from 5 to 10Hz and its mean was 7.3${\pm}$1.1Hz. This result showed similar aspects to the reported results of CBFs to data. We expect that this result will be applied in various clinical studies such as analysis of CBF changes by drugs or by diseaes.