• 동굴
• /
• 제14권15호
• /
• pp.42-90
• /
• 1987

제주화산도의 암석학에 대한 암석기재 및 총화학 조성의 63종은 이문원에 의해 보고되고 있다. 총화학조성 데-타는 FORTRAN77의 프로그램에 의해 해석을 하였다. 해석에는 우선 최소자집법에 의해 환산식과 산분도를 검토했다. 다음에 통계적 데-타는 평균치, 최대치, 최소치, 범위, 표준편차, 분산, 표준오차 및 변동계수를 구했다. 표준편차의 큰 단위 물질은 SiO$_2$, MgO 및 FeO이고 작은 단위 물질은 MnO와 P$_2$O$_{5}$이다. 표준오차와 분산은 표준편차와 매우 유사한 조항이 있다. 그렇지만 변동계수는 표준편차와 다르다. 여기에서 큰 단위 변동계수는 $H_2O$$^{-}$ 및 $H_2O$$^{+}$이고, 작은 단위 변동계수는 $Al_2$O$_3$ 및 SiO$_2$ 이다. 상관계수의 계산은 정과 부의 상관성을 SiO$_2$, $Al_2$O$_3$ 및 TiO$_2$에 대해서 다른 조성과의 관계를 계산적으로 구할수 있다.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.222-235
• /
• 2015

The purpose of this study is to suggest guidelines for riser fatigue analysis in terms of selection of reasonable analysis method. Three analysis methods (spectral, regular wave, rain-flow counting) are introduced and compared. As the riser systems give non-linear response, the time-domain analysis method is more preferred than frequency-domain analysis method. The spectral fatigue analysis method, however, is still useful for identifying fatigue prone areas. Once stress RAO is established, fatigue damage can be calculated very quickly. The regular wave method and the rain-flow counting method are more time consuming but give more exact results compare to spectral method. In case of regular wave method, a set of regular waves which represent random sea states is considered for dynamic analysis. The rain-flow counting method is the most intuitive and exact method because it refers time history stresses containing most of non-linear effects of the riser system. However, it is not common for early design stage to use rain-flow counting method because of its high cost. In this study, it was confirmed that the regular wave method is the most cost effective way in specific cases. However, if the system is highly non-linear, it seems that the regular wave method gives less accurate results than rain-flow counting method. Therefore, it is imperative that the engineers select appropriate analysis method based on design stage and given engineering period. This paper also discusses the theoretical background of each calculation method and hydrodynamic aspects of marine riser systems. A steel catenary riser (SCR) line on FPSO was considered and marine dynamic program (OrcaFlex) was used for static and dynamic analysis.

• 한국해안·해양공학회논문집
• /
• 제22권3호
• /
• pp.171-180
• /
• 2010

일본 미카와만의 연안 모니터링 부이에서 연속 관측한 수온 및 염분자료를 이용하여 성층의 시간적인 변화 양상을 분석하였다. 분석결과 우선 성층은 뚜렷하고 우세한 1년 주기의 변화 양상을 보이고 있으며, 표층과 저층의 밀도차이로 정의되는 성층강도는 강도가 증가할수록 발생빈도는 기하급수적으로 감소하는 양상을 보이는 것으로 파악되었다. 한편 성층강도의 발생빈도 분포는 정규분포 형태와는 다른 대수 정규분포 또는 지수분포 형태에 보다 근접한 것으로 파악되었다. 수온과 염분의 분산도 분석결과, 저층은 직선 형태의 변화 양상을 보이고 있으나 표층은 곡선 또는 고리(loop) 형태의 변화양상을 보이고 있는 것으로 파악되었다. 한편 성층강도 추정오차를 분석한 결과, 월 4회 관측빈도의 자료를 이용한 오차범위는 본 연구에서와 같이 관측부이의 1일 연속자료를 이용한 오차범위보다 4.45배 이상 증가하는 것으로 파악되었다.

• 대한교통학회지
• /
• 제23권1호
• /
• pp.93-102
• /
• 2005

통행기종점(Origin-Destination)은 경로 선택 및 통행 배정 등 교통계획 측면에서 중요한 정보 중 하나이다. O/D 예측은 대부분 현장 조사나 가구 면접조사를 통하여 표본 O/D를 산출하고 이를 전수화하는 것이 전통적인 방법이고, 가로 교통량과 통행배정모형과의 상호관계 속에서 동적 O/D를 추정하고자 하는 연구도 있다. 그러나, 최근에는 휴대폰 보급의 괄목할만한 증대에 따라 휴대폰 정보를 이용하여 O/D를 추정하는 연구에 관심이 기울어지고 있다. 본 연구에서는 휴대폰 기지국 정보를 이용한 O/D 추정 방법론을 제시하고, 휴대폰 기지국 기반 O/D를 행정동 기반 O/D로 변환하는 방법론을 제시한다. 연구를 위해 청주시에서 운행중인 택시에 GPS 장비 및 휴대폰 거치대를 설치하여 GPS 위치 좌표, 휴대폰 기지국 좌표를 수집하였고, 이중 3주간의 자료를 디지털 맵에 맵매칭시켜 기지국 위치 기반 O/D와 GPS 위치 기반 O/D를 산출하였다. GPS 위치 기반 O/D를 이용하여 주간 O/D 통행패턴, 주중 O/D와 주말 O/D 통행패턴, 일평균 O/D와 오전${\cdot}$오후 첨두시 O/D 통행패턴 사이의 관계를 산점도 및 상관계수로부터 유추한 견과, 주중 O/D와 주말 O/D간에는 통행패턴의 차이가 있으며, 오전 첨두시와 오후 첨두시의 통행패턴 역시 차이가 아는 것을 확인할 수 있었다. 휴대폰 기지국 기반 O/D를 행정동 기반 O/D화하는 방법으로 GPS 분포비를 이용한 방법과 기지국 커버리지 면적비를 이용한 방법을 제시하였으며, 두 방법 모두 참 O/D라 생각할 수 있는 GPS 위치 기반 O/D와 크게 다르지 않은 것을 상관계수, 평균절대오차율(MAE), 제곱근 평균제곱오차(RMSE)를 통하여 확인하였다. 향후 휴대폰 정보만을 이용하는 경우에는 휴대폰 기지국 커버리지 면적비를 이용하는 방법을 이용하면 O/D를 추정할 수 있을 것으로 판단된다. 또한 현재의 표본 택시 O/D를 전수화하는 방법도 제시하였다.

• 자원환경지질
• /
• 제30권3호
• /
• pp.249-262
• /
• 1997

The Sr and Nd isotopic compositions of two foliated granitic plutons located in the Chonju and Sunchang area were determined in order to reconfirm the intrusion ages of granitoids and to study the sources of granitic magmas. The best defined Rb-Sr isochron for the whole rock samples of the Chonju foliated granite (CFGR) give an age of $284{\pm}12Ma$, suggesting early Permian intrusion age. In contrast, the whole rock Rb-Sr data of the Sunchang foliated granite (SFGR) scatter widely on the isochron diagram with very little variation in the $^{87}Rb/^{86}Sr$ ratios and, therefore, yield no reliable age information. Futhermore they show the concordance of mineral and whole rock Rb-Sr isochron and divide into two linear groups with roughly the same slopes and significantly different $^{87}Sr/^{86}Sr$ ratios, indicating some kind of Rb-Sr distortion in whole rock scale and a difference in source material and/or magmatic evolution between two subsets. The reconstructed isochrons of 243 Ma, which was defined from the proposed data by the omission of one sample point with significantly higher $^{87}Rb/^{86}Sr$ ratio than the others, and 252 Ma, from the combined data of it and some of this study, strongly suggest the possibility that the SFGR was intruded appreciably earlier than had previously been proposed, although the reliability of these ages still questionable owing to high scatter of data points and, therefore, further study is necessary. All mineral isochrons for the investigated granites show the Jurassic to early Cretaceous thermal episode ranging from 160 Ma to 120 Ma Their corresponding initial $^{87}Sr/^{86}Sr$ ratios correlate well with their whole rock data, indicating that the mineral Rb-Sr system of the investigated granites was redistributed by the postmagmatic thermal event during Jurassic to early Cretaceous. The initial ${\varepsilon}Sr$ values for the CFGR (64.27 to 94.81) tend to be significantly lower than those for the SFGR (125.43 to 167.09). Thus it is likely that there is a marked difference in the magma source characteristics between the CFGR and the SFGR, although the possibility of an isotopic resetting event giving rise to a high apparent initial ${\varepsilon}Sr$ in the SFGR can not be ruled out. In contrast to ${\varepsilon}Sr$, both batholiths show a highly resticted and negative values of initial ${\varepsilon}Nd$, which is -14.73 to -19.53 with an average $-16.13{\pm}1.47$ in the CFGR and -14.78 to -18.59 with an average $-17.17{\pm}1.01$ in the SFGR. The highly negative initial ${\varepsilon}Nd$ values in the investigated granitoids strongly suggest that large amounts of recycled old continental components have taken part in their evolution. Furthermore, this highly resticted variation in ${\varepsilon}Nd$ is significant because it requires that the old crustal source material, from which the granitoid-producing melts were generated, should have a reasonably uniform Nd isotopic composition and also quit similar age. Calculated T2DM model ages give an average of $1.83{\pm}0.25Ga$ for CFGR and $1.96{\pm}0.19Ga$ for SFGR, suggesting the importance of a mid-Proterozoic episode for the genesis of two foliated granites. Although it is not possible to determine precisely the source rock compositions for the investigated foliatic granites, the Sr-Nd isotopic evidences indicate that midcrustal or less probably, a lower crustal granulitic source could be the most likely candidate.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.355-363
• /
• 1999

The experiments were carried out to elucidate the varietal variation of retrogradation in aged cooked rice and its association with some physicochemical properties of milled rice. The fifteen rice materials were selected from forty-three low-amylose japonica and Tongil-type rice cultivars based on palatability and retrogradation of cooked rice stratified by preliminary sensory evaluation of warm and cooled cooked rice. One japonica glutinous rice variety was included for comparison of retrogradation of cooked rice. The $\alpha$-amylase-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The desirable checking time for evaluating the varietal difference in deterioration of aged cooked rice was four hours after storing in room temperature and two hours after preserving in refrigerator based on the largest coefficients of variations in degree of retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, showed the relatively fast deterioration of cooked rice. The retrogadation index represented by the percentage of retrogradation difference between warm and cooled cooked rice to original estimates of warm cooked rice was significantly affected by the degree of retrogradation of cooled cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogradation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked nce. The varietal difference in retrogradation of cooked rice can be effectively classified by scatter diagram on the plane of upper two principal components based on some retrogradation properties of cooked rice. The deteriorated structural change in cooled cooked rice by observing through the scanning electron microscope was more conspicuous in the fastly retrograded cooked rice than in the slower one.

• 대한원격탐사학회지
• /
• 제32권3호
• /
• pp.263-274
• /
• 2016

이 연구에서는 2007년에서 2014년까지의 여름철에 대해 속초기상대 라디오존데 관측을 통해 산출된 가강수량과 속초 GNSS 관측소의 가강수량을 비교하였다. 라디오존데 센서 유형별 수증기량 관측 자료가 주야간 및 강수 발생 유무에 따라 어떠한 특성을 가지는지 분석하였다. 두 관측기기의 주간, 야간별 관측 시점에 따른 가강수량 산포도에서는 선행 연구에서 알려진 바와 같이 주간의 라디오존데 관측에서는 건조 편향이 발견되었다. 특히 RSG-20A 센서는 주간, 야간에서 다른 센서에 비해 건조 편향이 크게 나타났다. 또한 전반적으로 GNSS 가강수량이 증가함에 따라 라디오존데 가강수량이 GNSS 가강수량에 대해 과대 추정에서 과소 추정으로 변화하는 경향이 발견되었다. 라디오존데 가강수량의 편향 및 오차에 대한 정량적 분석에서는 2007, 2008년을 제외하고는 센서 종류에 상관없이 여름의 주간에 비해 야간에서 더 작은 평균 편향을 가짐을 확인할 수 있다. 여름철 강수의 유무에 따른 비교에서는 RS92-SGP 센서가 가장 뛰어난 품질의 결과를 보였다.

• 암석학회지
• /
• 제18권2호
• /
• pp.93-114
• /
• 2009

옥천대 서남부에 위치한 함평 지역의 백악기 화산암류에 대하여 암석학적, 암석화학적 특성 및 조구적 위치에 대하여 야외지질조사와 주원소, 미량원소 및 희토류원소의 분석을 통하여 수행하였다. 화산암류의 $SiO_2$함량 범위는 50.8${\sim}$77.2 wt.%이며, $SiO_2$함량이 증가함에 따라 $Al_2O_3$, $Fe_2O_3\;^T$, $TiO_2$, MnO, CaO와 MgO 함량은 감소, $K_2O$함량은 증가하는 경향을 보이나, $Na_2O$함량은 경향에서 벗어나 다소 분산된다. TAS성분도와 AFM성분도에서, 함평 지역의 백악기 화산암류는 칼크-알칼리암계열에 속하며, $SiO_2$에 대한 $K_2O$의 성분도에서는 고-K 암석계열에 속한다. 특징적으로 높은 LILE/HFSE 비와 LREE 원소의 부화 현상을 보여주는 화산암류의 미량원소 함량과 희토류원소의 변화 경향은 섭입대 환경에 연관된 대륙연변호의 칼크-알칼리암의 전형적인 특성을 보여준다. Ba/Ta와 Ba/La의 비에서도 화산호 환경에서의 마그마 작용에 연관되어 있음을 지시한다. 함평지역의 백악기 화산암류는 백악기 동안 태평양형 지체구조 환경에 연관된 유라시아 대륙판의 경계부에 위치한다.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.288-295
• /
• 1999

Nineteen japonica and Tongil-type rices were selected from seventy nine Korean and Japanese rice cultivars grown in 1989 based on the water uptake behavior of milled rice under the room temperature and boiling conditions. The selected rice cultivars were investigated for water absorbability and some physicochemical characteristics of milled rice, proper water amount for cooking and sensory evaluation of cooked rice. The relationships among the tested grain properties were also examined. The highest varietal variation of water uptake rate was observed at twenty minutes after soaking in water. The maximum water uptake of milled rices at room temperature occurred mostly at about eighty minutes after soaking in water. Newly harvested rices showed a significantly lower water uptake rate of milled rice at 20 minutes after soaking, a relatively higher maximum water absorption ratio under the room temperature, and the less water uptake and volume expansion of boiled rice compared with the one-year old rice samples. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice ansd the palatability of cooked rice. The water/rice ratio(in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was averaged to 2.63(in v/v basis). The water amount needed for optimum cooking was the lowest in Cheongcheongbyeo (Tongil-type rice) and the highest in Jinbubyeo, and the amount could be estimated with about 70% fittness by the multiple regression formula based on some water uptake characteristics, ADV and amylose content of milled rice as the independent variables. Nineteen rice cultivars were classified into seven groups based on scatter diagram projected by principal component analysis using eight properties related to water uptake and gelatinization of milled rice.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.