• Journal of the Korean institute of surface engineering
• /
• v.38 no.1
• /
• pp.44-48
• /
• 2005

We prepared nickel silicide layers from p-Si(l00)/SiO₂(2000 Å)/poly-Si(700 Å)/Ni(400 Å) structures, feasible for gates in MOSFETs, by annealing them from 500℃～900℃ for 30 minutes. We measured the color coordination in visible range, cross sectional micro-structure, and surface topology with annealing temperature by an UV-VIS-IR spectrometer, field effect scanning electron microscope(FE-SEM), and scanning probe micro-scope respectively. We conclude that we may identify the nickel silicide by color difference of 0.90 and predict the silicide process reliability by color coordination measurement. The nickel silicide layers showed similar thickness while the columnar grains size and surface roughness increased as annealing temperature increased.

• Computers and Concrete
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2019

Within the scope of this study, the foam solution was prepared by properly mixing sulfonate based foam agent with water. Furthermore, this solution was mixed with the mixture of fine sand, cement, and water to produce foamed concrete. The mixture ratios which are the percentage of foam solution used in foam concrete were chosen as 0, 20, 40 and 60% by vol. After these groups reached 28 days of strength, they were heated to 20, 100, 400 and $700^{\circ}C$ respectively. Afterward, high-temperature effects on the foamed concrete were obtained by employing physical and mechanical properties tests. Additionally, SEM (scanning electron microscope) and EDX (energy-dispersive X-ray spectroscopy) tests were employed to analyze the microstructure, and ${\mu}-CT$ (micro computed tomography) images were used to reconstruct 3-D models of the heat-treated specimens. Then, these models are analyzed to examine the void structures and the changes in these structures due to the high temperatures. The study has shown that the void structures reduce the high-temperature effects and the foam solution could be mixed with concrete up to 40 % by vol. where the high strength of foamed concrete is non-mandatory.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1297-1308
• /
• 2011

This research investigates the application of ZnO (zinc oxide) nanoparticles and $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via an electrospinning technique for the development of textile materials that can decompose harmful gases. To fabricate uniform ZnO nanocomposite fibers, two types of ZnO nanoparticles were applied. Colloidal $TiO_2$ nanoparticles were chosen to fabricate $TiO_2$ nano- composite fibers. ZnO/poly(vinyl alcohol) (PVA) and $TiO_2$/PVA nanocomposite fibers were electrospun under a variety of conditions that include various feed rates, electric voltages, and capillary diameters. The morphology of electrospun nanocomposite fibers was examined with a field-emission scanning electron micro- scope and a transmission electron microscope. Decomposition efficiency of gaseous materials (formaldehyde, ammonia, toluene, benzene, nitrogen dioxide, sulfur dioxide) by nanocomposite fiber webs with 3wt% nano-particles (ZnO or $TiO_2$) and 7$g/m^2$ web area density was assessed. This study shows that ZnO nanoparticles in colloid were more suitable for fabricating nanocomposite fibers in which nanoparticles are evenly dispersed than in powder. A heat treatment was applied to water-soluble PVA nanofiber webs in order to stabilize the electrospun nanocomposite fibrous structure against dissolution in water. ZnO/PVA and $TiO_2$/PVA nanofiber webs exhibited a range of degradation efficiency for different types of gases. For nitrogen dioxide, the degradation efficiency was 92.2% for ZnO nanocomposite fiber web and 87% for $TiO_2$ nanocomposite fiber web after 20 hours of UV light irradiation. The results indicate that ZnO/PVA and $TiO_2$/PVA nano- composite fiber webs have possible uses in functional textiles that can decompose harmful gases.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.601-606
• /
• 2000

Nickel mono-silicide(NiSi) shows no increase of resistivity as the line width decreases below 0.15$\mu\textrm{m}$. Furthermore, thin silicide can be made easily and restrain the redistribution of dopants, because NiSi in created through the reaction of one nickel atom and one silicon atom. Therefore, we investigated the deposition condition of Ni films, heat treatment condition and basic properties of NiSi films which are expected to be employed for sub-0.15$\mu\textrm{m}$ class devices. The nickel silicide film was deposited on the Si wafer by using a dc-magnetron sputter, then annealed at the temperature range of $150~1000^{\circ}C$. Surface roughness of each specimen was measured by using a SPM (scanning probe microscope). Microstructure and qualitative composition analysis were executed by a TEM-EDS(transmission electron microscope-energy dispersive x-ray spectroscope). Electrical properties of the materials at each annealing temperature were measured by a four-point probe. As the results of our study, we may conclude that; 1. SPM can be employed as a non-destructive process to monitor NiSi/NiSi$_2$ transformation. 2. For annealing temperature over $800^{\circ}C$, oxygen pressure $Po_2$ should be kept below $1.5{\times}10^{-11}torr$ to avoid oxidation of residual Ni. 3. NiSi to $NiSi_2$ transformation temperature in our study was $700^{\circ}C$ from the four-point probe measurement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.1-22
• /
• 1999

In order to investigate various physical and biological properties of dental magnetic attachments studies on retentive characteristics, corrosion properties, cytotoxicity of different magnetic systems for dental applications were done. For the study of retentive characteristics changes of retentive force by increasing air gap, wear properties of various attachment systems and loss of magnetic force by heat treatment were measured. Forte study of corrosion property of magnet covering metal electrochemical corrosion was done in artificial saliva and 0.9% NaCl solution between $-1,000mV_{SCE}\;and\;+1,000mV_{SCE}$. Anodic polarization curves are obtained about 6 types of samples and 2 types of solution. Corroded surfaces were examined with metallurgical microscope, scanning electron microscope and surface profilometer. For the study of cytotoxicity of magnetic attachment and its field cell growth and agar overlay test were done. The results of this study were as follows. 1. In Magnetic attachments using closed circuit retentive force at zero air gap was greater than magnets using open circuit, but decrease of retentive force by increasing air gap was also greater than open systems. 2. After 40,000 cycles of wear test all mechanical attachment resulted in varing degree of retention loss but in magnetic attachments no loss of retentive force was observed. 3. The magnetic attachment using Neodymium magnet showed early loss of retentive force about $200^{\circ}C$ but attachment using Samarium magnet showed some resistance to heat treatment and complete retention loss was observed about $500^{\circ}C$. The keeper was not influenced by heat treatment in retention. 4. In electrochemical corrosion test Dyna magnetic attachment covering metal showed the highiest corrosion resistance and Shiner magnet covering metal showed the least corrosion resistance and examination of corroded surface with metallurgical microscope, scanning electron micro-scope and surface profilometer also showed same results with anodic polarization corves. 5. The result of cell culture tests on the magnet covered with metal showed least recognizable cytotoxicity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.384-394
• /
• 1996

The experiment was conducted to determine the seed characteristics and preferable methods to enhance the seed germination rate in Bupleurum falcatum. The optimum temperature for the seed germination of Bupleurum falcatum is 2$0^{\circ}C$. Any significant promoting effects were not found in seed germination with hormone treatments and physical methods. At 15$^{\circ}C$, prechilling combined with 50~200ppm of GA$_3$ treatment raised germination rate by 2 times of control ones. The most positive effect was observed in the treatment of 10$^{-2}$ ~10$^{-3}$ M potassium nitrate only at 15$^{\circ}C$ for 12 and 24 hours. The leachate of Bupleurum falcatum didn't inhibit the germination of Lactuca sativa, showing almost 100% of germination rate, which is suggested that no inhibitors contained in the seeds of Bupleurum falcatum. Observation of embryo conditions under stereoscopic microscope showed that the ratio of seeds with or without embryo is almost 50/50. The results suggested that the lower rate of germination in Bupleurum falcatum was caused by embryolessness of seeds.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.133-133
• /
• 2012

일반적으로 TiO2는 광촉매 작용으로 표면 살균성을 가지며, 친수특성으로 인한 자가세정 능력도 가지고 있다. 또한 지구상에 많이 존재하는 광물로 원료의 가격이 저렴하다는 장점이 있어 산업 전반에 사용되고 있다. 하지만 외부의 환경적 오염으로 인한 광촉매 반응 면적의 감소에 따라 반응효율이 저하되는 단점이 있으며, SiO2는 투명한 유리와 같이 비정질상태가 안정하고 높은 굴절률을 가지며 내구성이 외부환경에 강해 무반사 코팅이나 금속박막의 보호층으로 주로 사용된다. WO3는 높은 굴절률과 가시광선 영역에서의 우수한 투과율을 가지고 있으나 conduction band에서 생성된 광캐리어들이 빠르게 재결합 하여 광분해 효율이 좋지 않기 때문에 흔히 쓰이지 않고 있다. 이러한 박막들의 단점을 보완하기 위해 물리적 구조를 변화시켜 반응 면적을 극대화하기 위해 버퍼층이나 다층박막을 사용하는 등 다양한 연구가 진행되고 있다. 본 실험에서는 Slide glass에 Plasma etching 하였을때 친수성이 나타나는 특성을 이용하여 대면적 코팅과 표면 경도를 우수하게 만들 수 있는 RF Magnetron sputtering법으로 Slide glass에 Ar Gas 분위기에서 각 파워별 Plasma etching한 후 TiO2, SiO2, WO3 박막을 증착하여 광학적, 구조적 특성을 분석하였다. 광투과율 측정장치(UV-VIS Spectrophotometer)를 사용하여 투과율을 측정한 결과 모든 박막이 가시광 영역에서 80% 이상의 높은 투과율을 나타내었으며, 접촉각 측정결과 100w로 etching한 glass에 TiO2를 증착한 박막에서 가장 낮은 $3^{\circ}$ 이하의 접촉각을 나타내었다. SEM (Scanning Electron Microscope) 분석을 통해 표면구조를 관찰한 결과 100w로 etching한 후 TiO2를 증착한 박막이 가장 조밀한 구조를 보였으며, AFM (Atomic Force MicroScope) 분석 결과 100w로 etching한 후 TiO2를 증착한 박막의 표면이 가장 거칠어지는 것을 볼 수 있었는데, 이는 물과 닿는 박막의 유효 표면적의 증가로 인하여 광촉매 효과가 증가하였기 때문에 친수성이 향상된 것으로 사료된다. 이러한 박막은 건물 유리벽과 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재, 디스플레이 표시장치로 활용할 수 있을 것으로 예상된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.