• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1778-1783
• /
• 2011

Hematopoietic cytokines regulate production of blood cells by stimulating proliferation and differentiation of bone marrow cells. Among these hematopoietic cytokines, called hematopoitic growth factors, glranulocyte-colony stimulating Factor (G-CSF), which regulates growth of neutrophils, is one of important therapeutic factors because cancer patients suffer with neutropenia which is severe reduction of neutrophils after chemotherapy. Two groups of recombinant G-CSF have approved and used for therapeutic purposes and many researches are still on-going to produce recombinant G-CSF by different techniques. We engineered human G-CSF with Bombyx specific endoplasmic reticulum (ER) signal sequence, therefore, secretion of human G-CSF protein was improved in Bombyx mori-origined cell line, Bm5. The Bombyx ER signal sequence and human G-CSF matured protein region chimera was further remodeled at the N-terminus of matured G-CSF protein to understand roles of N-terminus on outer cellular secretion and/or production. Three different mutants were generated deleting three amino acids in non alpha-helical region in N-terminus in order to scan important amino acids for G-CSF secretion. One of 3 different N-terminal deletion mutants showed dramatically reduction of secreted amount of G-CSF indicating its important role on secretion. The data suggest that remodeling in non alpha-helical region of N-terminus is also important for recombinant G-CSF production.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1073-1081
• /
• 2006

In this paper, a phased array antenna based on thin-film dielectric technology at 60 GHz is designed. In order to reduce dividing/combining loss and avoid high loss of phase shifters, Rotman Lens has been employed as a feeder of antenna. The lens has 3 beam ports and 5 array ports with 2 dummy ports. The simulation for the design was performed by simulator using MoM(method of moments). The measured results of fabricated lens show magnitude deviation less than ${\pm}2dB$ and phase aberration less than ${\pm}5^{\circ}$ over $58{\sim}62GHz$. The antenna shows ${\pm}7^{\circ}$ of scan angles.

• Journal of KIISE:Databases
• /
• v.29 no.5
• /
• pp.367-380
• /
• 2002

Due to recent increase in applications requiring huge amount of data such as spatial data analysis and image analysis, clustering on large databases has been actively studied. In a hierarchical clustering method, a tree representing hierarchical decomposition of the database is first created, and then, used for efficient clustering. Existing hierarchical clustering methods mainly adopted the bottom-up approach, which creates a tree from the bottom to the topmost level of the hierarchy. These bottom-up methods require at least one scan over the entire database in order to build the tree and need to search most nodes of the tree since the clustering algorithm starts from the leaf level. In this paper, we propose a novel top-down hierarchical clustering method that uses multidimensional indexes that are already maintained in most database applications. Generally, multidimensional indexes have the clustering property storing similar objects in the same (or adjacent) data pares. Using this property we can find adjacent objects without calculating distances among them. We first formally define the cluster based on the density of objects. For the definition, we propose the concept of the region contrast partition based on the density of the region. To speed up the clustering algorithm, we use the branch-and-bound algorithm. We propose the bounds and formally prove their correctness. Experimental results show that the proposed method is at least as effective in quality of clustering as BIRCH, a bottom-up hierarchical clustering method, while reducing the number of page accesses by up to 26～187 times depending on the size of the database. As a result, we believe that the proposed method significantly improves the clustering performance in large databases and is practically usable in various database applications.

• Journal of Information Management
• /
• v.30 no.4
• /
• pp.39-60
• /
• 1999

Digital library research has attracted much attention. While many research projects are funded by government agencies and national and international bodies, some are run by specific academic and research institutions and libraries. While some digital library projects, such as the ELINOR project in the UK, the first two phases of the eLib(Electronic Libraries) programme in the UK, and the first phase of the DLI(Digital Library Initiative) in the USA, are now over, a number of other projects are currently under-way in different parts of the world. Beginning with the definitions and characteristics of digital libraries proposed by various researchers, this paper provides brief accounts of some major digital library projects that are currently in progress, or are just completed, in different parts of the world. There follows a review of digital library research under 16 major headings. Literature for this review has been identified through a search on the LISA CD-ROM database and a Dialog search on library and information science databases, and the resulting output has been supplemented by a scan of the various Issues of D-Lib Magazine and Ariadne, and the Web sites of various organizations and institutions engaged in digital library research. The review indicates that we have learned a lot through digital library research within a short span of time. However, a number of issues are yet to be resolved. The paper ends with an indication of the research issues that need to be addressed and resolved in the near future in order to bring the digital library from the researcher's laboratory to the real life environment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.955-968
• /
• 2010

Three-dimensional body data has been used in many industry fields including the apparel industry. This research used data from a study of the changes in lower body girth measurements from a 3D scan study of 25 female subjects aged 18 to 24 in four postures; a standing posture, a $120^{\circ}$ knee bend posture, a one pace stepping posture, and a sitting posture with a $90^{\circ}$ knee bend. We used the information on the difference between standing and seated measurements to adjust ease values for pants patterns an evaluation of the appearance, and the comfort of the pants. Waist girth in the sitting posture increased 8% compared to a standing posture and the hip girth measurement increased 7%. A basic pants pattern (pants A) with 2.4cm ease at the waist and 2.6cm ease at the hip was developed and a pants pattern (pants B) was developed using the rates of lower body girth change with a 5.7cm ease (8% change) at the waist and 7cm ease (7% change) at the hip. The appearance assessment items of pants A in a standing posture were higher than pants B. On the other hand, most appearance assessment items of pants B in a sitting posture were higher than pants A, especially the ease of pants back waistline and the appearance of the whole back. Comfort assessment items of pants B in both standing and sitting postures were higher than the comfort assessment items for pants A, especially the location of pants waistline, the ease of pants at the waistline, and the ease at the abdomen. In order to find the best level of ease for better appearance and comfort in both standing and sitting postures, 20 pants were constructed with ease values at the waist and hip in increments of 1.1cm in the range between the ease values of pants A and pants B. A fit test was conducted to compare the average appearance and comfort ratings that identified the pants with the best ease values at the waist and hip. The highest total mean was achieved in the pants with a waist ease of 4.6cm and hip ease of 4.8cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1333-1342
• /
• 2008

This study intended to evaluate the visual sensibility of textiles of knitting simulation through the painting function of SDS-ONE, a computer knitting system, with the use of various fancy yarns for hand knitting. For this study, six kinds of fancy yarns with difference manufacturing style and form were selected: loop yarn, tamtam yarn, fur1 yarn, fur2 yarn, ladder yarn, and tape yarn. In order to create a computer knitting simulation, paint function of SDS-ONE was employed to scan the fancy yarns for hand knitting with a scanner. Then, after the registration of the yarns as data, the yarn was brought in for knitting simulation in plain stitch with 3 gauge. After that a survey was conducted involving 60 female experts in their twenties. Using SPSS 12.0, factor analysis, reliability, Pearson correlation coefficient, ANOVA, Duncan test, and regression analysis were performed to analyze the collected data. First, according to the result of analyzing the visual sense factor, three factors of the 'inflexibleness/ruggedness sense', 'lightweight sense', and 'smoothness sense' was extracted. According to the result of analyzing the visual sensibility factor, three factors of the 'activity', 'grace', and 'purity' was extracted. Second, With regard to preference and purchase intention, the knitted fabric with tamtam yarn(H2) was preferred than the other samples, indicating that the respondents had intention to purchase it. As for word-of-mouth intention, H2 ranked the first place, implying the respondents had intention to recommend it to other people. Third, the examination of the use of products each knitting simulation knit found that sweater and muffler are the most appropriate knit products. And H2 was the most suitable sample for sweater and muffler products. This study tried to prove that knit textile can be visually evaluated through a computer knitting simulation without the actual knitting and then to provide accurate data to related companies or the academic circle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.880-890
• /
• 2010

The intrasvascular ultrasound (IVUS) imaging technique is used to diagnose cerebrovascular diseases such as stroke. Recently, elasticity imaging methods have been investigated to diagnose blood clots attached to blood vessel intima. However, the IVUS imaging technique is an invasive method that requires a transducer to be inserted into blood vessel. In this paper, strain images are obtained of blood clots attached to blood vessel intima with data acquired from outside the blood vessel using a linear array transducer. In order to measure the displacement of blood vessel accurately, experimental data are acquired by steering ultrasound beams so that they can intersect the blood vessel wall at right angles. The acquired rf data are demodulated to the baseband. The resulting complex baseband signals are then processed by an autocorrelation algorithm to compute the blood vessel movement and thereby produce strain image. This proposed method is verified by experiments on a plastic blood vessel mimicking phantom. The efficacy of the proposed method was verified using a home-made blood vessel mimicking phantom. The blood vessel mimicking phantom was constructed by making a 6 mm diameter hollow cylinder inside it to simulate a blood vessel and adhering 2 mm thick soft plaque to the inner wall of the hollow cylinder. The RF data were acquired using a clinical ultrasound scanner (Accuvix XQ, Medison, Seoul. Korea) with a 7.5 MHz linear array transducer by steering ultrasound beams in steps of $1^{\circ}$ from $-40^{\circ}$ to $40^{\circ}$ for a total of 81 angles. Experimental results show that the plaque region near the blood vessel wall is softer than background tissue. Although the imaging region is restricted due to the limited range of angles for which scan lines are perpendicular to the wall, the feasibility of strain imaging is demonstrated.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.207-214
• /
• 2016

In this study, it was an investigation of the degree of awareness and consciousness of the radiology technicians about radiation protection working in the computed tomography room in Busan when the pediatric underwent brain CT scan. It was sorted by university hospital, general hospital and hospital and compared the scores of awareness and consciousness. As a result of awareness, university hospital had the highest point of 42.29 followed by general hospital and hospital of 38.43 and 34.06 respectively. On the other hand, the average score of consciousness was the highest in hospital of 29.19 followed by general hospital and university hospital of 24.68 and 21.37 respectively. It is considered to need assistance to cultivate an awareness of the radiation through refresher training and conferences, etc in order to increase the awareness of the general hospitals and hospitals for CT workers. In addition, it is also expected to pay for efforts to increase the consciousness of CT workers in university hospitals seeking the optimization of radiation protection and dose reduction of radiation exposure for the pediatric.

• Elastomers and Composites
• /
• v.19 no.1
• /
• pp.13-31
• /
• 1984

The purposes of this dissertation are to demonstrate that DSC theromoanaytical methods of vulcanization can provide useful informations on the vulcanization characteristics of industrial formulations and also provides the potential basis for a rapid and complete method of sulfur and vulcanizing accelerator analysis for quality control. The influences of those factors such as heating rate, scan temperature, vucanizing accelerator's type and concentration upon vulcanization exotherm in NR and NBR compounds in the presence of vulcanizing accelerators such as TMTD,MBTS,DPG,TMTM,CBS, and MBT were evaluated by means of DSC. In order to examine the credibility in the DSC method, the same samples which were used for DSC method were studied to compare the DSC results with the ODR (Oscillating Disk Rheometer) data. The results obtained were as follows 1. In the DSC dynamic experiments, the observed enthalpy results from vulcanization depends upon the heating rate; In the range of 2 to $20^{\circ}C/min$ of heating rate, as the heating rate was increased the enthalpy change was also increased. However, over the heating rate of $30^{\circ}C/min$ it was observed that the enthalpy change was decreased as the heating rate was further increased. Without regard to the change of enthalpy, tremendous instantaneous heat evolving was observed in the range of high heating rates. 2. For the samples which are added with various vulcanizing accelerators, the activation energies of vulcanization were as follows; 3. Regarding to the influences of vulcanizining accelerator's types upon the characteristics of vulcanization exotherm, NR and NBR compounds in the presence of thiuramsulphide compounds type accelerators such as TMTD, TMTM, were exhibited sharper and higher vulclanization exotherm than others. From the resuts of DSC thermograms which was distributed in even shape in the broad temperature range, it was clearly shown that the guanidine compounds type accelerator such as DPG acts as a delayed acting accelerator. 4. In the comparison of DSC and ODR results, the dependency of temperature in the cure rate and the observed conversions show good agreements between two results. 5. In the same curatives, by the comparison of glass transition temperatures, it was possible to predict relative values of maximum torques. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method for rapid and complete quality control analysis of rubber industry.