• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.277-289
• /
• 1996

The purpose of this study was to compare the amount of the vertical pin opening of dentures processed by the conventional compression method & the injection-processing method. The articulating ribbon and T-Scan system were used to determine the changes in tooth contacts and the correlation between the changes in tooth contacts and the amount of the vertical pin opening after processing was analyzed statistically. The obtained results were as follows. 1. The amounts of the vertical pin opening were 0.75mm, 0.31mm for conventional compression method and injection-pressing method, respectively. The difference between the two methods was highly significant on the basis of t test statistics(p<0.05). 2. The total number of contact points recorded by articulating ribbon after processing was decreased to 48%, 72%, of that before processing for conventional compression method and injection-pressing method, by T-Scan system, 39%, 53%, respectively. 3. The mean values for the number of contacts points per tooth recorded by articulating ribbon after processing were 1.6 for the second molar, 2.2 for the first moalr, 0.4 for the second premolar, 0.6 for the first premolar in conventional compression method, and 2, 3.2, 1.2, 0.8 in injection-pressing method. 4. The correlation between the reduction of contact points and the amount of the pin opening after processing was not significant. 5. The mean values for the number of contact points per tooth recorded by T-Scan system after processing were 1.25, 1.4, 0.7, and 0.55 at the second molar, the first molar, the second premolar, and the first premolar in conventional compression method, and 1.45, 2.1, 1.0, 0.75 in injection method, respectively. 6. The correlation between the number of contact points by using articulating ribbon and T-Scan system after processing was not significant in both methods.

• 핵의학기술
• /
• 제12권1호
• /
• pp.13-18
• /
• 2008

목적: 다양한 algorism에 의한 영상처리기법은 핵의학 영상을 결정짓는 중요한 부분을 차지하고 있다. 이에 새로운 영상처리기법인 SIEMENS (made by pixon)사의 Onco. flash processing reconstruction을 적용하여 기존의 영상처리기법을 이용한 영상과 비교 분석함으로써 그 임상적 유용성을 평가한다. 대상 및 방법: 1) Scan speed의 차이에 의한 whole body bone scan을 시행하고, raw data와 processing data의 imaeg quality를 비교 분석하여 상대 평가한다. 2) Bone static scan을 acquisition count를 달리하여 시행하고, raw data와 processing data의 image quality를 비교 분석하여 상대 평가한다. 3) 4 quadrant - bar phantom을 이용하여 raw data와 processing data와의 육안적 평가를 통한 image quality를 확인한다. 4) LSF을 통한 raw data와 processing data의 FWHM을 구하여 해상력 평가를 확인한다. 결과: 1) Whole body bone scan을 시행하여 본원 핵의학 판독의의 blinding test한 결과 scan speed 20 cm/min의 raw data와 30 cm/min의 processing data에는 임상 판독에 영향을 미칠 수준의 image quality 저하가 없었으나, 40 cm/min processing data는 영상 판독과 진단에 오류의 가능성을 배제 할 수 없는 image quality의 향상을 볼 수 없었다. 2) Bone static scan의 경우 200 kcts processing data는 200 kcts raw data보다 확실한 image quality의 향상을 가져왔으며 400 kcts raw data와 비교한 본원 핵의학 판독의 blinding test 결과 판독과 진단에 무리가 없을 수준의 유사한 image quality를 보였다. 3) 4 quadrant - bar phantom을 이용하여 raw data와 processing data와의 육안적 평가는 processing을 통한 image quality의 향상을 확인할 수 있었다. 4) LSF을 통한 raw data와 processing data의 FWHM 평가 결과, resolution의 뚜렷한 증가나 감소의 확인은 할 수 없었다. 이는 noise level의 감소와 high S/N ratio 때문이라 판단된다. 결론: 기존의 영상과 비교 분석하여 평가한 결과 Onco. flash processing reconstruction을 적용한 경우 일정 수준까지 뚜렷한 image quality의 향상을 보였으며, 이는 장비 가동률의 상승과 환자 대기일수의 단축 그리고 저선량 검사에 따른 방사선 피폭에 대한 적극적 방어의 관점에서 현재 임상 핵의학에 충분한 유용성과 타당성이 있을 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.403-403
• /
• 2000

Generally estimation of driving direction uses the way which uses lane detection and vanishing point in autonomous-driving system. Especially we use Sub-window for decreasing Process time when we detect lane, but fixed sub-window can not detect lane because of some factors in road image. So we suggest algorithm using one-dimension line scan method to detect an exact position of lane.

• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.142-150
• /
• 1996

Nowadays, as the development paeiod of new products becomes even shorter, the importance of Rapid Prototyping Technology(RPT) has been rapidly increased. The major application of RPT is an early verification of product designs and quick production of prototypes for testing. Moreover, RPT is applied not only as a second tooling process such as mold making and investment casting but also as a creating some physical structure in medical field. Despite the remarkable progress of RPT, it is required to improve various problems resulting from application such as production time, accuracy and materials. This paper presents a laser scan path generation for accuracy of stereolithographicparts The methodology of laser scan path generation is discussed based on the stereolithography, The procedure of this research is as follows : 1) Input laser scanning conditions such as a laser beam diameter and a laser scanning interval, 2) Reconstruct original contours without self intersecting offset, 3) Calculate offset about reconstructed contours, 4) Calculate intersection points between horizontal or vertical lines and offset contours for internal hatch, 5) Decide laser shutter on/off points. The algorithm developed and programmed by C language is verified as an efficient method after testing a number of STL files of mechanical parts.

• 대한핵의학회지
• /
• 제26권1호
• /
• pp.82-85
• /
• 1992

To evaluate the role of hepatobiliary (DISIDA) scan in the diagnosis of biliary obstruction, we studied the clinical characteristics of 9 cases with biliary obstructuon, whose hepatobiliary scans and ultrasonography were not concordant (normal ultrasonography and abnormal hepatobiliary scan). The results were as follows; 1) The main chief complaints (89%) were abdominal pain, especially in RUQ area. The levels of serum bilirubin were elevated in 67% of patients $(normal\sim5.9mg/dl)$ and those of alkaline phosphatase were elevated in 78% of patients $(normal\sim724U/L)$. 2) The final diagnoses were CBD stones (67%), tumor (22%) and 3 cases were associated with C. sinensis. 3) The major obstruction sites were in distal CBD (89%). From the above results we concluded that hepatobiliary scan is a useful diagnostic method of biliary obstruction, especially in distal CBD lesion and early stage, in spite of normal ultrasonography.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1153-1163
• /
• 2014

An efficient 3D SLAM (Simultaneous Localization and Map Building) method is developed for urban building environments using a tilted 2D LRF (Laser Range Finder), in which a 3D map is composed of perpendicular/horizontal planar polygons. While the mobile robot is moving, from the LRF scan distance data in each scan period, line segments on the scan plane are successively extracted. We propose an "expected line segment" concept for matching: to add each of these scan line segments to the most suitable line segment group for each perpendicular/horizontal planar polygon in the 3D map. After performing 2D localization to determine the pose of the mobile robot, we construct updated perpendicular/horizontal infinite planes and then determine their boundaries to obtain the perpendicular/horizontal planar polygons which constitute our 3D map. Finally, the proposed SLAM algorithm is validated via extensive simulations and experiments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.658-665
• /
• 2000

Purpose : The present study was carried out to determine the diagnostic usefulness of bone scan for evaluating jaw bone extension of oral cancer. Materials and Methods : Medical records, preoperative bone scans, computerized tomographic (CT) scans, conventional radiographs, and findings of histopathologic sections of twenty patients who had been treated for oral malignant tumors by a resection of mandible and soft tissue at Chonnam University Hospital from January, 1994 to September, 1999 were analyzed. Results : In 13 cases which showed histopathologically positive, preoperative bone scans were positive in 12 (92.3%) and false negative in 1 (7.7%). Preoperative CT scans were positive in 9 (69.2%) and false negative in 4 (30.8%) of the 13 cases. Preoperative conventional radiographs were positive in 8 (61.5%) and false negative in 5 (38.5%) of the 13 cases. In 7 cases showing negative histopathologic findings, 1 (14.3%) was in CT scans and 2 (28.6%) were false positive in preoperative conventional radiographs. Conclusion : These results suggest that bone scan is more sensitive and reliable method for evaluating jaw bone extension of oral cancer than conventional radiographs or CT scans.

• 한국의상디자인학회지
• /
• 제22권1호
• /
• pp.1-13
• /
• 2020

The purpose of this study is to create a 3D avatar from 3D human body shape data using the CLO 3D virtual clothing program and to verify the feasibility of avatar production using the virtual clothing system for verifying size and shape. The research method was to select one virtual representative model that is the closest to the mean size of each body item for each age group. Using the 3D human body scan shape of a 40-69 years old male was applied to the CLO 3D virtual wearing system. Using the CLO 3D Avatar conversion menu, we verified the feasibility of creating a 3D avatar that reproduces the human body scan shape. In the dimension comparison between the 3D avatar and the fictitious representative model, the dimension difference was noticeable in height, circumference, and length. However, as a result, the converted 3D avatar showed less than a 5% difference in most human dimensions. In addition, since the body shape and posture were reproduced similarly, the utilization of the avatar was verified.

• Journal of Korean Dental Science
• /
• 제13권1호
• /
• pp.28-34
• /
• 2020

Purpose: The purpose of this study was to investigate the influence of different implant computer software on the accuracy of image registration between radiographic and optical scan data. Materials and Methods: Cone-beam computed tomography and optical scan data of a partially edentulous jaw were collected and transferred to three different computer softwares: Blue Sky Plan (Blue Sky Bio), Implant Studio (3M Shape), and Geomagic DesignX (3D systems). In each software, the two image sets were aligned using a point-based automatic image registration algorithm. Image matching error was evaluated by measuring the linear discrepancies between the two images at the anterior and posterior area in the direction of the x-, y-, and z-axes. Kruskal-Wallis test and a post hoc Mann-Whitney U-test with Bonferroni correction were used for statistical analyses. The significance level was set at 0.05. Result: Overall discrepancy values ranged from 0.08 to 0.30 ㎛. The image registration accuracy among the software was significantly different in the x- and z-axes (P=0.009 and <0.001, respectively), but not different in the y-axis (P=0.064). Conclusion: The image registration accuracy performed by a point-based automatic image matching could be different depending on the computer software used.

• 대한핵의학회지
• /
• 제28권1호
• /
• pp.141-144
• /
• 1994

내시경 담낭절제술은 개복수술보다 여러가지 장점이 있어서 점차 보편화되는 경향이지만 이에 수반하는 합병증도 여러가지가 발표되고 있으며, 그 가운데 담도손상으로 인한 담즙유출은 재수술을 요한다. 저자들은 43세의 남자와 54세의 여자에서 내시경 담낭절제술후에 발생한 복강내 담즙유출을 $^{99m}Tc$-DISIDA 간담도 스캔으로 확진하고 이의 유용성을 증례와 함께 보고하는 바이다.