본 연구에서는 환경오염을 발생시키는 주요한 중금속 물질의 하나인 구리를 상대적으로 쉽게 검출하기 위해, CNT 전극 및 벗김전압전류법을 이용하여 구리 금속의 감도 향상을 위한 최적조건 및 민감도를 평가하였다. 또한 구리의 벗김반응이 발생될 때의 반응 메카니즘에 대한 연구도 수행하였다. 이를 위해, 네모파 벗김전압전류법 및 선형주사 전압 전류법등의 전기화학적 분석법이 이용되었다. 평가 결과, 네모파 벗김전압전류법의 최적조건으로, 15 mV의 네모파증폭율, 60 Hz의 주파수, -1.0V vs. Ag/AgCl의 석출전위 및 200초의 석출시간이 결정되었다. 구리 금속의 민감도를 측정한 결과 $1.824{\mu}A/{\mu}M$의 민감도를 얻을 수 있었다. 선형주사 전압전류법을 이용하여 구리의 벗김반응에 영향을 끼치는 인자를 평가하였을 때, 확산반응 보다는 표면반응이 구리의 벗김반응 성능에 영향을 끼치는 것으로 측정되었다. 이러한 전기화학적 분석 결과가 다른 참고문헌들과 비교되어졌고, 구리금속의 민감도 측면에서 본 연구에서 제안한 CNT 전극의 우수함이 입증되었다.
This study aims to investigate whether there is intensionally changing eye - gaze on the cafe space images with floor finishing materials. In the Yarbus' experiment, he argued that changing information that an observer is asked to obtain from an image changes pattern of eye movements. Based on the scan path evidence, this research have questions as (1) the difference of visual attention on finishing floor material stimulus, (2) visual attention of initial activity time and type of movement paths on AOIs, and (3) visual relation floor area with another AOIs. Eye movements were recorded with the SMI REDn Scientific, which sampled eye position at 30Hz and lasted 2 minutes(120s). Although viewing was binocular, only the right eye was tracked. Of the 66 observers(mean age 22 years, standard deviation: ${\pm}1.82$) who participated in the experiment done by the four point calibration and validation procedures at the beginning tasks. Analyzing qualitative data from the number of fixation and duration on AOIs divided into four parts (AOI I-Floor, AOI II-Wall, AOI III-Ceiling, and AOI IV-Counter) in the stimulus. The results from this experiment analyzed as follows. First, it was significant in the difference of the average number of AOIs fixation times observed for the spatial image using the wood tile flooring material and the polishing tile. The wood tile flooring of stimulus had higher fixation number on AOI-II, AOI-III, and AOI-IV than the polishing tile. On seeing AOI-I was higher attention in the polishing tile stimulus. Second, the observers examined AOI-II intensively in both stimuli. However, the visual intensity was also followed by on the AOI-IV and AOI-I in the wood tile flooring stimulus, and on AOI-I, AO-IV in the polishing tile. Third, visual attention data on each AOIs have divided into the time range of "5 sec" for both images. In the wood tile stimulus, the horizontal movement path followed by AOI-II, AOI-IV, and AOI-II. In the polished tile stimulus, the movement path followed by moving vertically to AOI-II, AOI-I, and AOI-II. This study approached meaningfully and found out the characteristics of visual attention, according to the different intentions of visual attention, the relationship pathways of visual mechanism appeared and also activated by eye-tracking experiments.
목 적 : Kikuchi 병은 고열을 동반한 양성 림프절 비대를 특징으로 하는 아급성 괴사성 림프절염이다. 주로 젊은 여성에게 발생하며 소아에 있어 드물게 보고되고 있다. 병인으로는 바이러스와 연관성, 자가 면역기전 등이 제시되고 있으나 정확히 밝혀지지 않은 상태이다. 최근 저자들은 소아에서 발생한 괴사성 림프절염 5례를 경험하였기에 소아에 있어 Kikuchi 병의 임상적 고찰을 하였다. 방 법 : 2001년 1월부터 2006년 6월까지 경희대학교 소아과에 Kikuchi 병으로 진단 받은 환아 5명을 의무기록을 통해 발생 연령, 성별비, 계절별 발생빈도, 임상증상, 과거력, 검사 소견, 림프절의 발생 부위 및 크기, 방사선학적 소견 등을 조사하였다. 결 과 : 남아가 2명, 여아가 3명이었으며, 평균 연령은 9년 9개월(8년 2개월-12년 6개월)이었다. 주된 증상은 지속되는 발열과 림프선 비대로 병원을 방문하였다. 모든 환자는 항생제 치료를 받았으며, 2명의 환자에게서 발진이 발생하였다. 1례에서 초음파 검사상 Kikuchi 병이 의심되는 괴사성 변화가 관찰되었다. 3례에서 추가적으로 컴퓨터 단층촬영을 실시하였다. 입원 후 절제 생검할 때까지 소요된 시간은 10.2일(7-15일)이었다. 5례 모두 림프절 절제 생검 후 조직 검사상 괴사성 림프절염으로 확진하였다. 결 론 : Kikuchi 병은 진단 전에 불필요한 검사와 항생제 치료를 하며 이로 인해 입원 기간도 길어진다. 이에 저자들은 소아에 있어 Kikuchi 병의 임상 양상을 고찰하였다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제34권5호
/
pp.509-517
/
2008
DNA 손상 치유 유전자 연구를 기초로 한 임상적 접근이 새로운 치료방법으로 떠오르고 있다. 많은 연구들이 중요한 DNA 수복유전자의 다형성을 찾아내어 각각의 단백질의 활동성에 대한 영향을 알아내고 특정한 치료법을 찾아내고 임상적 적용을 시도하고 결과를 평가하였다. 그 결과 암 치료에서 정상 세포와 암세포에서 DNA 수복 유전자의 발현 분석은 화학요법이나 방사선 치료에서 개인맞춤형 치료법을 가능하게 하고 있다. 예를 들어, NER이 결핍된 종양은 cisplatin 치료에 민감성을 나타내고, MMR 결핍세포는 알킬화 화학요법 약제에 높은 내성을 나타낸다. 선천성 비폴립성 결장암과 같은 MMR 결손종양 또한 알킬화 화학요법 약제에 의한 치료에 내성을 가진다. 신경교종(glioma)에서 MGMT 유전자 프로모터가 흔히 메틸화되는데 이것은 유전자 발현이 억제되고 알킬화 화학요법제에 대한 반응성을 증가시킨다. 향후 구강악안면외과 영역에서도 구강암의 발생의 위험성을 증가시킬 수 있는 더 많은 DNA 수복 유전자의 다형성을 발굴하고 임상적으로 개인맞춤형 치료법을 개발하고 적용할 수 있는 많은 연구가 필요할 것으로 사료된다.
The locking compression plates-distal femur(LCP-DF) are being widely used for surgical management of the extra-articular complex fractures of the distal femur. They feature locking mechanism between the screws and the screw holes of the plate to provide stronger fixation force with less number of screws than conventional compression bone plate. However, their biomechanical efficacies are not fully understood, especially regarding the number of the screws inserted and their optimal configurations. In this study, we investigated effects of various screw configurations in the shaft and the condylar regions of the femur in relation to structural stability of LCP-DF system. For this purpose, a baseline 3-D finite element (FE) model of the femur was constructed from CT-scan images of a normal healthy male and was validated. The extra-articular complex fracture of the distal femur was made with a 4-cm defect. Surgical reduction with LCP-DF and bone screws were added laterally. To simulate various cases of post-op screw configurations, screws were inserted in the shaft (3~5 screws) and the condylar (4~6 screws) regions. Particular attention was paid at the shaft region where screws were inserted either in clustered or evenly-spaced fashion. Tied-contact conditions were assigned at the bone screws-plate whereas general contact condition was assumed at the interfaces between LCP-DF and bone screws. Axial compressive load of 1,610N(2.3 BW) was applied on the femoral head to reflect joint reaction force. An average of 5% increase in stiffness was found with increase in screw numbers (from 4 to 6) in the condylar region, as compared to negligible increase (less than 1%) at the shaft regardless of the number of screws inserted or its distribution, whether clustered or evenly-spaced. At the condylar region, screw insertion at the holes near the fracture interface and posterior locations contributed greater increase in stiffness (9~13%) than any other locations. Our results suggested that the screw insertion at the condylar region can be more effective than at the shaft during surgical treatment of fracture of the distal femur with LCP-DF. In addition, screw insertion at the holes close to the fracture interface should be accompanied to ensure better fracture healing.
Mohamad, Maisarah;Wahab, Norhazlina Abdul;Yunus, Rosna;Murad, Nor AzianAbdul;Zainuddin, Zulkifli Md;Sundaram, Murali;Mokhtar, Norfilza Mohd
Asian Pacific Journal of Cancer Prevention
/
제17권7호
/
pp.3437-3445
/
2016
Background: There is an increasing concern in the role of microRNA (miRNA) in the pathogenesis of bone metastasis (BM) secondary to prostate cancer (CaP). In this exploratory study, we hypothesized that the expression of vinculin (VCL) and chemokine X3C ligand 1 (CX3CL1) might be down-regulated in clinical samples, most likely due to the post-transcriptional modification by microRNAs. Targeted genes would be up-regulated upon transfection of the bone metastatic prostate cancer cell line, PC3, with specific microRNA inhibitors. Materials and Methods: MicroRNA software predicted that miR-21 targets VCL while miR-29a targets CX3CL1. Twenty benign prostatic hyperplasia (BPH) and 16 high grade CaP formalin-fixed paraffin embedded (FFPE) specimens were analysed. From the bone scan results, high grade CaP samples were further classified into CaP with no BM and CaP with BM. Transient transfection with respective microRNA inhibitors was done in both RWPE-1 (normal) and PC3 cell lines. QPCR was performed in all FFPE samples and transfected cell lines to measure VCL and CX3CL1 levels. Results: QPCR confirmed that VCL messenger RNA (mRNA) was significantly down-regulated while CX3CL1 was up-regulated in all FFPE specimens. Transient transfection with microRNA inhibitors in PC3 cells followed by qPCR of the targeted genes showed that VCL mRNA was significantly upregulated while CX3CL1 mRNA was significantly down-regulated compared to the RWPE-1 case. Conclusions: The down-regulation of VCL in FFPE specimens is most likely regulated by miR-21 based on the in vitro evidence but the exact mechanism of how miR-21 can regulate VCL is unclear. Up-regulated in CaP, CX3CL1 was found not regulated by miR-29a. More microRNA screening is required to understand the regulation of this chemokine in CaP with bone metastasis. Understanding miRNA-mRNA interactions may provide additional knowledge for individualized study of cancers.
흑연 음극 표면상에 형성되는 필름의 생성 기구를 규명하기 위하여, 1 몰의 $LiPF_6$가 함유된 탄산에틸렌과 탄산디에칠의 혼합 용액 중에서 고배향성 열분해 흑연을 0.5 mV $s^{-1}$ 의 느린 속도로 전위주사하면서 원자력간 현미경을 이용하여 전극표면을 in-situ 관찰하였다. 전해질 용액의 분해반응은 전극의 스텝 모서리 상에서 우선적으로 진행되었으며, 전극 전위 2.15 V (vs. $Li^+$/Li) 에서 시작되었다. 0.95-0.8 V (vs. $Li^+$/Li) 의 전위 영역에서 전극 표면의 특정 부분이 평탄하게 부풀어오르는 현상과, 타원형의 돌기 구조가 관찰되었다. 이러한 형상 변화에 있어서 전자는 용매화된 리튬 이온이 흑연 층간에 삽입되며 나타나는 구조 변화이며, 후자는 삽입된 용매화 리튬이 환원 분해되어 생성된 것으로 추정된다. 0.8 V (vs. $Li^+$/Li) 보다 음의 전위 영역에서는 입자상의 침전물이 전극 표면에 형성되었다. 1 사이클 후, 측정된 침전층의 두께는 30 nm 이었다. 이러한 침전물은 리튬염($LiPF_6$)과 용매 분자(EC 및 DEC)들이 분해되어 생성된 것이며, 전극 표면에서 계속적으로 전해질 용액이 분해되는 반응을 억제하는 중요한 역할을 하고 있는 것으로 생각된다.
Objective: microRNAs (miRNAs) can play a role in a variety of physiological and pathological processes, and their role is achieved by regulating the expression of target genes. Our previous high-throughput sequencing found that ssc-miR-185 plays an important regulatory role in piglet diarrhea, but its specific target genes and functions in intestinal porcine epithelial cell (IPEC-J2) are still unclear. We intended to verify the target relationship between porcine miR-185 and cell division cycle 42 (CDC42) gene in IPEC-J2 and to explore the effect of miR-185 on the proliferation of IPEC-J2 cells. Methods: The TargetScan, miRDB, and miRanda software were used to predict the target genes of porcine miR-185, and CDC42 was selected as a candidate target gene. The CDC42-3' UTR-wild type (WT) and CDC42-3'UTR-mutant type (MUT) segments were successfully cloned into pmirGLO luciferase vector, and the luciferase activity was detected after co-transfection with miR-185 mimics and pmirGLO-CDC42-3'UTR. The expression level of CDC42 was analyzed using quantitative polymerase chain reaction and Western blot. The proliferation of IPEC-J2 was detected using cell counting kit-8 (CCK-8), methylthiazolyldiphenyl-tetrazolium bromide (MTT), and 5-ethynyl-2'-deoxyuridine (EdU) assays. Results: Double enzyme digestion and sequencing confirmed that CDC42-3'UTR-WT and CDC42-3'UTR-MUT were successfully cloned into pmirGLO luciferase reporter vector, and the luciferase activity was significantly reduced after co-transfection with miR-185 mimics and CDC42-3'UTR-WT. Further we found that the mRNA and protein expression level of CDC42 were down-regulated after transfection with miR-185 mimics, while the opposite trend was observed after transfection with miR-185 inhibitor (p<0.01). In addition, the CCK-8, MTT, and EdU results demonstrated that miR-185 promotes IPEC-J2 cells proliferation by targeting CDC42. Conclusion: These findings indicate that porcine miR-185 can directly target CDC42 and promote the proliferation of IPEC-J2 cells. However, the detailed regulatory mechanism of miR-185/CDC42 axis in piglets' resistance to diarrhea is yet to be elucidated in further investigation.
본 논문은 자동계류 장치에 설치하여 선박의 접안 상황을 검출할 수 있는 시각 센서의 개발에 대하여 논하고 있다. 선박의 접안 시 사고방지를 위해 선박의 속도를 통제하고 위치를 확인하고 있음에도 불구하고 부두에서의 선박 충돌사고는 매년 발생하고 있으며, 이로 인한 경제적, 환경적 피해가 매우 크다. 따라서 부두에 접안하는 선박에 대한 안전성 확보를 위해 선박의 위치 및 속도 정보를 신속하게 확보할 수 있는 시각 시스템의 개발은 중요하다. 이에 본 연구에서는 선박의 접안 시 사람과 유사하게 영상을 통해 접안하는 선박을 관찰하고, 주변 환경에 따른 선박의 접안 상태를 적절하게 확인할 수 있는 시각센서를 개발하였다. 먼저, 개발하고자 하는 시각 센서의 적정성을 확보하기 위해 기존 센서로부터 제공되는 정보, 감지 범위, 실시간성, 정확도 및 정밀도 측면에서 센서 특성을 분석하였다. 이러한 분석 자료를 바탕으로 LiDAR형태의 3D시각 시스템의 개념 설계, 구동메커니즘 설계 및 모션 구동부의 힘과 위치 제어기 설계 등을 수행하여 대상물의 정보를 실시간으로 획득할 수 있는 3D 시각 모듈을 개발하였다. 최종적으로 시스템 구동을 위한 제어 시스템의 성능평가와 스캔 속도에 대한 성능을 분석하였고, 실험을 통해 개발된 시스템의 유용성을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.