• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1136-1140
• /
• 2007

In this paper dose a laver surface check using a real time image process. This system does false retrieval of a laver at a laver production line. At first, a laver image was read in real time using a CCD camera. In this paper, we use an area scan CCD camera. Image is converted into a binary code image using a high-speed imaging process board afterwards. A laver feature is extracted by a binary code image. Surface false retrieval is finally executed using a laver feature. In this paper, we use an area feature of a laver image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.557-560
• /
• 2014

In digital communications systems, an interleaver spreads burst errors occurred in channels and makes it random errors. As a result, the signals are rearranged and encrypted to the 3rd party. Deinterleaving this unknown interleaved signal is very important in electronic warfare and various researches on reconstruction of interleaved signal have been studied in the literature. Unlike previous researches which is mainly about helical scan interleaver or bit unit interleaver, in this paper, we estimate the symbol unit convolutional interleavr and shortened Reed-Solomon code parameters such as the number of stages of interleaver, a codeword length and a data symbol length and propose an specific algorithm to obtain the parameters from the unknown interleaved signal and simulate this algorithm as well.

• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.256-266
• /
• 1985

The loss of coolant flow accident is analyzed for the pressurized water reactor of Korea Nuclear Unit-1. The loss of coolant flow accident is classified into three types in accordance with its severity; partial loss of coolant flow, complete loss of coolant flow and pump locked rotor accident. Analysis has been carried out in three stages; system transient and average core analysis, DNBR calculation and hot spot analysis. The purpose of developing KTRAN is to simulate the transient fast. For the DNBR calculation, the thermal hydraulic codes, SCAN and COBRA IV-1, are adopted. And for the hot spot analysis, the fuel thermal transient code LTRAN is employed. This code system should be fast responding to the transient analysis. In case the transient occurs, severity comes within a couple of seconds. So response should be fast to accomodate the following sequence of the accident. Unfortunately this purpose could not be achieved by KTRAN. However, the calculated results are well comparable with FSAR results in range. Thereby, the effectiveness of KTRAN code analysis in this type of accident is proven.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.139-145
• /
• 2022

As products that consumers want become more diverse, the types of automation equipment are becoming more diverse and advanced to produce competitive products. In general, equipment is manufactured with built-in interface devices (HMI) for users so that operators can efficiently monitor and operate equipment quickly. Because HMI devices are connected to various industrial controllers, elements such as communication protocols of various controllers must be understood and set up in the design stage. Non-experts not only have difficulty choosing compatible items among various protocols, but also have limitations in integrating and operating on one device because screens and settings are statically assigned. This paper proposes a model that can scan information such as equipment ID and communication protocol with QR code using a mobile device, access industrial controller, and remotely operate the displayed equipment screen. The proposed model is expected to increase efficiency in inspection and management of automated equipment as it can easily set, monitor, and operate the communication environment of various automated equipment using one mobile device.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.30-35
• /
• 2013

Purpose: One of the current services, providing information to the patients and their guardians by using promotion materials induces positive responses and contributes to the improvement of the hospital reliability. Therefore, the objective of this study is to evaluate the effectiveness of audio visual materials, one of the means of promotion, as a way to give accurate medical information to resolve patient's curiosity about purpose and procedure of their examination and deplete complains about waiting which attributes negative effect to service quality assessment. Materials and Methods: 60 patients(mean age $53.97{\pm}12.24$, male : female = 26 : 34) who had $^{18}F-FDG PET/CT$ scan from July 2012 to August 2012 in Seoul Asan Medical Center were referred to the study. All of the patients having PET/CT scan were asked to watch an informative video material before the injection of radiopharmaceutical ($^{18}F-FDG$) and to fill in a questionnaire. Results: As a result of analyzing the contents of questionnaire, 52% of 60 patients had PET/CT scan for the first time and 72.4% of the patients read the PET/CT guidebook offered from their outpatient department or inpatient wards before their scan. After we searched the level of previous knowledge of the purpose and method of PET/CT scan, the patients answered 25.1% "know well", 34% "not sure", 40.9% "don't know" respectively. And 84.7% of the patients answered that watching the PET/CT guide video before the injection helps understanding what exam they were having and 15.3% of the patients did not. For the question asking ever the patients have experienced using our homepage or smart phone QR code to see the guide video before they visit out PET center, only 3.3% of them answered "yes". Lastly, the patients answered 60.1% "yes", 31.4% "so so" and 8.5% "no" respectively for the question asking whether watching the video makes the patients to fill the waiting time short. Conclusion: It is found that understanding of objective and method of the PET/CT scan and level of satisfaction was improved after the patients watched the guide video whether they had PET/CT scan before and read the PET/CT guidebook or not. Also, watching the video was effective for the reduction of perceptible waiting time. But while displaying the PET/CT guide video is useful for providing information about the scan and shortening the waiting time as one of the medical service, utilization of service was actually very poor because of the passive promotion and indifference of the patients about their examination. Therefore, from now on, it is necessary to construct the healthcare system which can be offered to more patients through the active promotion.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.243-244
• /
• 2016

은행거래를 하려면 Active X를 기반으로 하는 보안 통합설치프로그램, 공인인증 보안프로그램, 개인 PC방화벽 프로그램 등 보안에 필요한 프로그램을 설치해야한다. 그러나 Active X의 보안취약점으로 앞으로 나올 브라우저에서는 Active X대신 웹 표준 모듈을 기반으로 하는 보안 시스템을 제공하고 있다. 본 논문은 Active X를 대체할 수 있는 것으로 웹 표준 모델에 근거한 QR코드 및 지문인식을 통한 인증을 제안한다. 본 논문에서 제안한 시스템을 적용한다면, 보다 안전한 은행거래를 하는데 도움을 줄 수 있다.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2016

The problem of resolution in antenna ground-penetrating radar (GPR) is very important for the investigation and detection of buried targets. We should solve this problem with software or a numeric method. The purposes of this paper are the modelling and simulation resolution of antenna radar GPR using three antennas, arrays (as in the software REFLEXW), the antenna dipole (as in GprMax2D), and a bow-tie antenna (as in the experimental results). The numeric code has been developed for study resolution antennas by scattered electric fields in mode B-scan. Three frequency antennas (500, 800, and 1,000 MHz) have been used in this work. The simulation results were compared with experimental results obtained by Rial and colleagues under the same conditions.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.444-447
• /
• 2008

In this paper, we proposed the recognition system of car license plates to mitigate traffic problems. The processing sequence of the proposed algorithm is as follows. At first, a license plate segment is extracted from an acquired car image using morphological features and color information, and noises are eliminated from the extracted license plate segment using line scan algorithm and Grassfire algorithm, and then individual codes are extracted from the license plate segment using edge tracking algorithm. Finally the extracted individual codes are recognized by an FCM algorithm. In order to evaluate performance of segment extraction and code recognition of the proposed method, we used 100 car images for experiment. In the results, we could verify the proposed method is more effective and recognition performance is improved in comparison with conventional car license plate recognition methods.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2015

The development of information and technology has brought plenty of changes to the educational environment. The prevalence of smart phones is particularly playing a huge role in shaping learning methods. Smart phones provide the opportunity to scan QR codes, which can greatly ease access to information. Due to a high recognition speed, recognition rate, and restoration rate, they can be useful tools for English teachers to use in their class. In this study, we suggest using QR codes for writing and picture descriptions. Based on this study, more research should invest in Technology Embedded English teaching models to create better English classes for students.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.2 s.15
• /
• pp.11-14
• /
• 2006

A new reset waveform with negative ramp pulse is proposed. Conventional reset waveform applied to the commercial PDP uses a positive ramp pulse. The reset waveforms, especially focused on ramp area, were examined with 2 dimensional fluid code. The proposed negative reset waveform showed much lower ignition voltage ($\sim$70V) as compared with the conventional reset waveform. When the negative ramp pulse was applied, all of the positive-charged ions are collected on the scan electrode. It is found that the ignition voltage of reset discharge due to the negative ramp pulse became lower than that of positive ramp discharge.