• Journal of Families and Better Life
• /
• v.16 no.4
• /
• pp.233-250
• /
• 1998

This study describes the development of the scale for measuring soundness of family life in Korea. The scale developed by this study was composed of 52questions in 7categories selected from 110sentences,. Advertges by using this scale hereafter are as follows : This scale make itself useful as a guidline for managing family life in view of prospect to carry out the specifical and practical management behavior as a test materials for designing and bringing up the family life and finally first of all useful of describing and measuring the conditions and soundness of family life in view of Korean

• Physical Therapy Korea
• /
• v.11 no.1
• /
• pp.27-34
• /
• 2004

This study aims to compare the relationship between the Berg Balance Scale (BBS) scores, Timed Up & Go (TUG), Functional Independent Measure (FIM), and subject characteristics. All of the 18 subjects were women between the ages of 68 and 91 (mean=80.2, SD=5.43), and they all lived at the nursing home in Wonju. Balance was measured using BBS, and functional mobility was measured using TUG. FIM was used to evaluate functional independence. Data were analyzed using Spearman correlation. Statistically significant differences were noted between BBS and TUG (r=-.486, p<.05). There were no significant statistical differences between total FIM and BBS, TUG. The FIM items "locomotion" and "communication" showed significant statistical differences between BBS and TUG. The results suggest that FIM may be able to predict dangerous falls in elderly people.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.358-362
• /
• 2003

An electrochemical reduction technology which can reduce the decay heat, volume, and radioactivity of spent fuel by a factor of quarter by converting oxide type spent fuel to a metallic form in a molten salt was developed and mock-up test in a 5kg $U_3O_8$/batch scale was carried out. The electrochemical reaction was analyzed regarding the operational factors. The research efforts was also concentrated on the apparatus development for a hot test. Fresh $U_3O_8$ powder was metallized with a more than 99% yield via this electrochemical technology and design data for the 20kg $U_3O_8$/batch scale apparatus were also obtained.

• Health Policy and Management
• /
• v.10 no.3
• /
• pp.155-168
• /
• 2000

The SERVQUAL scale is based on the gap theory, which indicates the difference between consumers' expectations and their actual performance. In SERVQUAL scale, the expectations are defined as a "feasible ideal point"(ex, An Excellent hospital has up-to-date equipment). But empirical research identified important problems concerning the conceptual definitions of expectations. They suggests the usage of "desired expectations". Desired expectations are defined as the level at which the consumer predict the service that the organization they visited will perform(ex, $\bigcirc\bigcirc$ hospital has up-to-date equipment). The purpose of this study was to compare the feasible ideal point expectations with desired expectations in assessment of consumer expectations using SERVQUAL scale. We developed two types of questionnaires : (1) to measure feasible ideal point expectations, (2) to measure desired expections. Questionnaire were distributed to ambulatory patients who used the medical service. Total 329 patients participated the hosiptal satisfaction questionnaire(167 for feasible ideal point expectations, 162 for desired expectations). The major finding is as follows: (1) the SERVQUAL scale which was computed by the feasible ideal point showed the higher explanatory power in consumer satisfaction ($R^2$=0.26) than the other identified alternatives(desired expectation, $R^2$=0.11) The results of a study suggests that the feasible ideal point were more conceptually suitable to assess of consumer satisfaction using SERVQUAL scale.SERVQUAL scale.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.353-363
• /
• 2021

This study analyzed to provide information for business improvement by analyzing the management efficiency of start-up investment companies so that startup investment companies can operate efficiently and by presenting information on inefficient factors. From 2014 to 2018, 83 start-up investment companies were analyzed using the DEA model. Input variables were he number of employees, capital, and output variables were selected for start-up investment assets, operating income, and net profit. As a result of the analysis, technical efficiency and pure technical efficiency showed a pattern with an increase in average, but scale efficiency repeatedly increased and decreased. It is believed that the decline in technology efficiency was due to the decrease in pure technology efficiency, and the inefficiency of start-up investment companies seems to have influenced the inefficiency of start-up investment companies rather than the inefficiency of scale. In addition, the size revenue shows that the DRS value is gradually decreasing, and the IRS value is generally increasing. It is believed that efficiency can be improved if operational inefficiency is improved based on the results and efficiency measures are established through scale expansion.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1451-1456
• /
• 2017

Finding technical issues associated with equipment scale-up is an important subject for the investigation of pyroprocessing. In this respect, electrolytic reduction of 1 kg $UO_2$, a unit process of pyroprocessing, was conducted using graphite as an anode material to figure out the scale-up issues of the C anode-based system at pilot scale. The graphite anode can transfer a current that is 6-7 times higher than that of a conventional Pt anode with the same reactor, showing the superiority of the graphite anode. $UO_2$ pellets were turned into metallic U during the reaction. However, several problems were discovered after the experiments, such as reaction instability by reduced effective anode area (induced by the existence of $Cl_2$ around anode and anode consumption), relatively low metal conversion rate, and corrosion of the reactor. These issues should be overcome for the scale-up of the electrolytic reducer using the C anode.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.100-109
• /
• 2015

Environmental problems from petroleum-based plastic wastes have been rapidly increasing in recent years. The alternative solution is focus on the development of environmental friendly plastic derived from renewable resource. Poly(lactic acid) (PLA) is a biodegradable polymer synthesized from biomass having potential to replace the petroleum-based non-degradable polymers utilizations. PLA can be synthesized by two methods: (1) ring-opening of lactide intermediate and (2) direct polycondensation of lactic acid processes. The latter process has advantages on high yields and high purity of polymer products, materials handling and ease of process treatments. The polymerization process of PLA synthesis has been widely studied in a laboratory scale. However, the mass scale production using direct polycondensation of lactic acid has not been reported. We have investigated the kinetics and scale-up process of direct polycondensation method to produce PLA in a pilot scale. The order of reaction is 2 and activation energy of lactic acid to lactic acid oligomers is 61.58 kJ/mol. The pre-polymer was further polymerized in a solid state polymerization (SSP) process. The synthesized PLA from both the laboratory and pilot scales show the comparable properties such as melting temperature and molecular weight. The appearance of synthesized PLA is yellow-white solid powder.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.417-418
• /
• 2002

열분해는 독성이 강한 염화탄화수소의 처리뿐만 아니라 염화물을 효과적으로 제거하여 이들로부터 유용한 탄화수소를 얻을 수 있는 반응이다 Biomass에 열분해를 적용하여 가스상, 액상, 고상형태의 유동한 부산물로 전환시키고 있으며 현재 액상생성물은 외국에서 큰 주목을 받고 있는 부산물이다. 1,1,2-trichloroethane(TCE)는 독성이 강한 휘발성 유기화합물(VOC)이며 발암물질이다. (중략)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.255-273
• /
• 2019

Perceptions of beauty change and are shared with others in the media of emotional words. In the modern age, a mix of traditional and modern make-up cultures has changed the standards of beauty. Therefore, an analysis using emotional words (an image that consumers have for certain subjects) and an image scale that intuitively shows them can be an important means for understanding changes in the "beauty of the time". This paper considered changes in typical aesthetic characteristics that women pursued through make-up by analyzing emotional words in white make-up powder advertisement texts from the 1920s through the 1930s. Imported modern technologies changed cosmetic manufacturing techniques and advertising methods to create a momentum that changed women's make-up culture from light to heavy make-up or from white to color make-up. Such changes have led to changes in the perception of beauty and were expressed through sensitive vocabularies such as pure, new, fresh, lofty, lively, healthy, and cheery. Such changes reflect social aspects such as women's aspirations for high status, pursuit of security, or women's roles under the wartime regime to show a change from beauty with an attribute of [+cool] to that of [+soft].

• KSBB Journal
• /
• v.22 no.4
• /
• pp.191-196
• /
• 2007

This study used biofilm process, which needs simple operation, maintenance and smaller facility area than conventional activated sludge process with the small plant operation, in the treatment of increasing sewage with the rapid industrial growth. The reactor used in this study consists of one anaerobic and one aerobic chamber filled with waste ceramic and waste vinyl as media and the treated sewage was from restaurant source. The experiment was scaled up from lab. to pilot scale and lasted for about 100 days. We focused on the removal efficiency of organics, nitrogen and phosphorus with constant HRT and continuous aeration. The removal efficiency of $BOD_5$ and SS were 94.33% and 87.77% respectively, which was a satisfaction level. However the removal efficiency of $COD_{Cr}$ was 81.46% somewhat below the desired level of 90%, and that of T-N and T-P showed 71.92% and 21.10% respectively, that was below the expected value. The removal efficiency of $COD_{Cr}$ and T-N in the pilot scale was about 10% low compared with the lab.-scale.