• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.73-82
• /
• 2005

Generally, to evaluate a slope stability of the geosynthetic reinforced soil slope, the modified version of limit equilibrium method can be used. In most cases, resisting effects of reinforcement are dealt with considering an increased shear strength on the potential slip surface. However, it is not clear that the methods satisfy all three equilibrium equations. In this study, the new slope stability analysis method in which not only reinforcing effects of geosynthetics can be considered but also all three equilibrium equation can be satisfied is proposed. A number of illustrative examples, including published load test of large-scale reinforced retaining wall and centrifuge model tests on the geotextile reinforced soil slopes, are also analyzed. As a result, it is shown that the newly suggested method produces a relatively accurate factor of safety.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.15-27
• /
• 2013

In order to plan out the Daegu G membrane filtration water treatment plant, water quantity, water quality and process stability were evaluated using the field pilot-scale tests, during the six months of continuous operation, including low water temperature period. The field model experiments, which were carried out according to the Installation Criteria of Ministry of Environment, consisted of two series : series 1 - water quality verification, and series 2 - membrane process evaluation. The process water quality met all drinking water standards with less than 0.03 NTU. Moreover, process operation showed a stable membrane pressure with 99% of recovery ratio. This shows that the tests were properly designed in terms of the influence of water loading and temperature. In conclusion, the purpose of this study is to establish core technology for advanced drinking water treatment, through on-going accumulation of engineering and construction know-how.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.69-77
• /
• 2018

The use of membrane as an innovative technology for water treatment process has now widely been accepted and adopted to replace the conventional water treatment process in increasing fresh water production for various domestic and industrial purposes. In this study, ultrafiltration (UF) membranes with different formulation were fabricated via phase inversion method. The membranes were fabricated by varying the polymer concentration (16 wt%, 18 wt%, 20 wt%, and 21 wt%). A series of tests, such as field emission scanning electron microscope (FESEM), pore size and porosity, contact angle, and zeta potential were performed to characterize the membranes. The membrane performance in terms of permeation flux and rejection were evaluated using a laboratory bench-scale test unit with mine water, lake water and tube well as model feed solution. Long hour filtration study of the membranes provides the information on its fouling property. Few pore blocking mechanism models were proposed to examine the behaviour of flux reduction and to estimate the fouling parameters based on different degree of fouling. 21 wt% PVDF membrane with smaller membrane pore size showed an excellent performance for surface water treatment in which the treated water complied with NWQS class II standard.

• International Journal of Stem Cells
• /
• v.10 no.1
• /
• pp.1-11
• /
• 2017

Human cardiomyocytes (CMs) cease to proliferate and remain terminally differentiated thereafter, when humans reach the mid-20s. Thus, any damages sustained by myocardium tissue are irreversible, and they require medical interventions to regain functionality. To date, new surgical procedures and drugs have been developed, albeit with limited success, to treat various heart diseases including myocardial infarction. Hence, there is a pressing need to develop more effective treatment methods to address the increasing mortality rate of the heart diseases. Functional CMs are not only an important in vitro cellular tool to model various types of heart diseases for drug development, but they are also a promising therapeutic agent for cell therapy. However, the limited proliferative capacity entails difficulties in acquiring functional CMs in the scale that is required for pathological studies and cell therapy development. Stem cells, human pluripotent stem cells (hPSCs) in particular, have been considered as an unlimited cellular source for providing functional CMs for various applications. Notable progress has already been made: the first clinical trials of hPSCs derived CMs (hPSC-CMs) for treating myocardial infarction was approved in 2015, and their potential use in disease modeling and drug discovery is being fully explored. This concise review gives an account of current development of differentiation, purification and maturation techniques for hPSC-CMs, and their application in cell therapy development and pharmaceutical industries will be discussed with the latest experimental evidence.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.232-249
• /
• 1998

The first Korean remote sensing satellite, Korea Multi-Purpose Satellite (KOMPSAT-1), is going to be launched in 1999. This will carry a 7m resolution Electro-Optical Camera (EOC) for earth observation. The primary mission of the KOMPSAT-1 is to acquire stereo imagery over the Korean peninsular for the generation of 1:25,000 scale cartographic maps. For this mission, research is being carried out to assess the possibilities of automated or semi-automated mapping of EOC data and to develop, if necessary, such enabling tools. This paper discusses the issue of automated digital elevation model (DEM) generation from EOC data and identifies some important aspects in developing a DEM generation system from EOC data. This paper also presents the current status of the development work for such a system. The development work will be described in three pares of sensor modelling, stereo matching and DEM interpolation. The performance of the system is shown with a SPOT stereo pair. A DEM generated from commercial software is also presented for comparison. The proposed system seems to generate promising results.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.411-419
• /
• 2003

An area corresponding to the spatial resolution of optical remote sensor imagery often includes more than one pure surface material. In such case, a pixel value represents a mixture of spectral reflectance of several materials within it. This study attempts to apply the spectral mixture analysis on forest and to evaluate the information content of endmember fractions resulted from the spectral unmixing. Landsat-7 ETM+ image obtained over the study area in the Kwangneung Experimental Forest was initially geo-referenced and radiometrically corrected to reduce the atmospheric and topographic attenuations. Linear mixture model was applied to separate each pixel by the fraction of six endmember: deciduous, coniferous, soil, built-up, shadow, and rice/grass. The fractional values of six endmember could be used to separate forest cover in more detailed spatial scale. In addition, the soil fraction can be further used to extract the information related to the canopy closure. We also found that the shadow effect is more distinctive at coniferous stands.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1505-1514
• /
• 2019

The permanent magnet synchronous motor (PMSM) is widely used in various fields and the proportional-integral (PI) controller is popular in PMSM control systems. However, the motor parameters are usually unknown, which can lead to a complicated PI controller design and poor performance. In order to design a PI controller with good performance when the motor parameters are unknown, a control algorithm based on stability margin is proposed in this paper. First of all, based on the mathematical model of the PMSM and the least squares (LS) method, motor parameters are estimated offline. Then based on the estimation values of the motor parameters, natural angular frequency and phase margin, a PI controller is designed. Performance indices including the natural angular frequency and the phase margin are used directly to design the PI controller in this paper. Scalar functions of the d-loop and the q-loop are selected. It can be seen that the designed controller parameters satisfy Lyapunov large scale asymptotic stability theory if the natural angular frequencies of the d-loop and the q-loop are large than 0. Experimental results show that the parameter estimation method has good accuracy and the designed PI controller proposed in this paper has good static and dynamic performances.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.173-185
• /
• 2019

This article presents a comparative study of the effect of steel layouts on the seismic behavior of transition steel-concrete composite connections, both experimental and analytical investigations of concrete filled steel tube-reinforced concrete (CFST-RC) and steel reinforecd concrete-reinforced concrete (SRC-RC) structures were conducted. The steel-concrete composite connections were subjected to combined constant axial load and lateral cyclic displacements. Tests were carried out on four full-scale connections extracted from a real project engineering with different levels of axial force. The effect of steel layouts on the mechanical behavior of the transition connections was evaluated by failure modes, hysteretic behavior, backbone curves, displacement ductility, energy dissipation capacity and stiffness degradation. Test results showed that different steel layouts led to significantly different failure modes. For CFST-RC transition specimens, the circular cracks of the concrete at the RC column base was followed by steel yielding at the bottom of the CFST column. While uncoordinated deformation could be observed between SRC and RC columns in SRC-RC transition specimens, the crushing and peeling damage of unconfined concrete at the SRC column base was more serious. The existences of I-shape steel and steel tube avoided the pinching phenomenon on the hysteresis curve, which was different from the hysteresis curve of the general reinforced concrete column. The hysteresis loops were spindle-shaped, indicating excellent seismic performance for these transition composite connections. The average values of equivalent viscous damping coefficients of the four specimens are 0.123, 0.186 and 0.304 corresponding to the yielding point, peak point and ultimate point, respectively. Those values demonstrate that the transition steel-concrete composite connections have great energy dissipating capacity. Based on the experimental research, a high-fidelity ABAQUS model was established to further study the influence of concrete strength, steel grade and longitudinal reinforcement ratio on the mechanical behavior of transition composite connections.

• Journal of Korean Academy of Nursing
• /
• v.49 no.5
• /
• pp.526-537
• /
• 2019

Purpose: The aim of this study was to evaluate the validity and reliability of the Korean version of the Clinical Teaching Behavior Inventory (CTBI). Methods: The English CTBI-23 was translated into Korean with forward and backward translation. Survey data were collected from 280 nurses' preceptors at five acute-care hospitals in Korea. Content validity, construct validity, and criterion-related validity were evaluated. Cronbach's ${\alpha}$ was used to assess reliability. SPSS 24.0 and AMOS 22.0 software was used for data analysis. Results: The CTBI Korean version consists of 22 items in six domains, including being committed to teaching, building a learning atmosphere, using appropriate teaching strategies, guiding inter-professional communication, providing feedback and evaluation, and showing concern and support. One of the items in the CTBI was excluded with a standardized factor loading of less than .05. The confirmatory factor analysis supported good fit and reliable scores for the Korean version of the CTBI model. A six-factor structure was validated ($x^2=366.30$, p<.001, CMIN/df=2.0, RMSEA=.06, RMR=.03, SRMR=.05, GFI=.90, IFI=.94, TLI=.92, CFI=.94). The criterion validity of the core competency evaluation tool for preceptors was .77 (p<.001). The Cronbach's ${\alpha}$ for the overall scale was .93, and the six subscales ranged from .72 to .85. Conclusion: The Korean version CTBI-22 is a valid and reliable instrument for identifying the clinical teaching behaviors of preceptors in Korea. The CTBI-22 also could be used as a guide for the effective teaching behavior of preceptors, which can help new nurses adapt to the practicalities of nursing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.49-49
• /
• 2018

라오스의 Houay Pano 유역은 상업적 조림으로 인해 2011년부터 2013년까지 급속한 토지이용 변화를 겪어왔다. 본 연구는 이러한 토지이용변화가 박테리아 거동에 어떠한 영향을 주는지 이해하기 위해 Soil and Water Assessment Tool (SWAT) 모형을 활용한 박테리아 거동 모델링을 수행하였다. SWAT 모형은 수치 표고 모델, 토양 특성, 토지 이용 등의 정보를 종합하여, 유역 내수량 및 수질의 변화를 모의할 수 있는 모형으로, 본 연구는 대표적인 분원성 지표 세균 (Fecal Indicator Bacteria)인 대장균 (Escheichia coli, E. coli)을 대상으로 모델링을 수행하였다. SWAT 모형은 지표면 위 박테리아를 1)식물 위, 2)토양 용액상, 3)토양 입자상으로 구분하여 모의한다. 각 상태로 분할된 박테리아는 소멸 (die-off), 씻김 (wash-off), 침투, 표면 유출을 통한 수계로의 이동 등의 단계를 통하여 유역 내에서 거동한다. 본 연구는 서로 다른 기후의 영향을 배제하기 위해 각 토지이용 시나리오를 (2011, 2012, 2013) 실제 기후 조건과 동일 기후(2011-2013 평균) 조건으로 분류하여 분석하였다. 실제 기후 조건에서 SWAT 모형은 표면 유출, 토사 유출, E. coli 거동에 대해 2011년부터 2012년까지 감소, 2012년부터 2013년까지 증가로 모두 동일한 양상을 모의하였다. 이는 강수량의 양상과 동일한 것으로, 강수량이 표면 유출의 양을 결정하고, 달라진 표면 유출에 따라 토사 유출과 E. coli 거동이 결정되기 때문이다. 하지만 동일 기후 조건에서는, E. coli 거동 동인인 표면 유출과 토사 유출이 비교적 일정해짐에 따라, 각 상태로 분할된 박테리아의 초기 부하량값이 E. coli 거동을 결정하는 주된 요인임을 확인 할 수 있었다. 따라서 초기 부하량 분할에 활용되는 엽면적 지수 (Leaf Area Index)와 분배계수 (BACTKDDB)의 정확도가 요구된다. 추가적으로 본 연구는 박테리아의 유입원인 비료 모델링과, LAI를 활용한 박테리아 초기 부하량 산정, 토양 특성 변수와 토지 이용 변수의 분리, 지하수를 통한 박테리아 거동 등을 중심으로 SWAT 모형의 한계점과 개선점을 제시하였으며, 본 연구 결과는 토지이용변화가 박테리아 거동에 주는 영향을 모형적으로 이해하고, 또한 추후 박테리아 모델링 개발에 도움을 줄 것으로 예상된다.