• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.3_4
• /
• pp.79-91
• /
• 1971

A boat seine has been used as a major fishing gear for catching anchovy (Engraulis japonica) in the southern coastal waters of Korea since 1920s. The original seine was operated by two rowing boats as the haul seine. The rowing boats were, in recent, replaced by powered boats. The net size was enlarged by more than three times the original nit as they began to by operated in the deeper waters of approximately sixty meters. However, there are many problems in the efficiency of the fishing gear to be improved. The authors studied on the hydrodynamic resistance and performance of the boat seine net of the 1/10 scale model in tow. The results are summaried as follows. 1. The hydrodynamic resistance converted from model experiment into the full scale is: $$R_1=30,000\;v^{1.2}\;(0.2{\leqq}v{\leqq}1.0)$$ $$R_2=16,000\;v^2\;(0.2{\leqq}v{\leqq}0.6)$$ where $R_1$ and $R_2$ denote the resistance of whole gear and of bag net in kg respectively, and v the speed of flow in m/sec. 2. In the extension wing, approximately seventy percent of the length of the ground rope from the towing end to the inside-wing slopes down from sea level toward the sea bottom, while the thirty percent of the inside of it remains parallel with th: 5:a level. The performance is regarded to b: inefficient for driving fish shoal into the inside-wing, especially for the shoal diving suddenly. 3. At the towing speed higher than 0.2 m/sec, the trailing edge of the inside-wing is blown backward beyond the seaming line connecting the inside-wing and the mouth of the bag net. It is regarded as an unreasonable performance to drive the fish shoal smoothly into the bag net. 4. At the towing speed higher than 0.2 m/sec, the posterior end of the lower bosom is lifted up above the level of the ground rope of the inside-wing. It is considered that the fish shoal diving suddenly can escape through the discrepancy between the lower bosom and the sea bottom, even if the ground rope of the inside-wing sweeps the sea bottom. 5. The angle of inclination of the upper bosom is estimated as $35\~40^{\circ}$. It seems that the inclination is too steep to drive smoothly the fish shoal diving toward the sea bottom into the bag net. 6. In structure, circumference of the posterior section of the bag net is wider by 1.3 times that of the anterior section. Actually in towing at a speed higher than 0.2m/sec, however, the circumference of the posterior section becomes smaller than that of the anterior section. It is recommended to be designed in a long cylindrical form.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.694-701
• /
• 2012

The main purpose of this study is to evaluate of backwash system of hydrodynamic separator filter (HSF) with solar powered submerged pumps. It consists of a photovoltaic solar array, control electronics, battery, and two submersible pump powered by a 12 voltage DC motor. The laboratory scale study on treatable potential of micro particles using backwash HSF that was a combined with perlite filter cartridge and backwash nozzles. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particle sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin partices, silica gel particles, and commercial area manhole sediment particles. HSF was made of acryl resin with 250 mm of diameter filter chamber and overall height of 800 mm. Four case test were performed with different backwashing conditions and determined the SS removal efficiency with various surface loading rates. The operated range of surface loading rate was about 308~$1,250m^3/m^2/day$. It was found that SS removal efficiency of HSF using two submersible pumps improved by about 18% compared with HSF without backwash. Nonpoint control devices with solar water pumping systems would be useful for backwashing the filter in areas with not suppling electricity and reduce filter media exchange cost.

• Korean Journal of Social Welfare
• /
• v.36
• /
• pp.71-99
• /
• 1998

There is a general consensus that fate of the differentiated welfare state had fallen into the brink of demise during the 1970s while the integrated welfare state model has emerged instead. Indications are all that such trend spotlights occupational welfare which has been relatively neglected, especially, in the field of social welfare. Nevertheless, the occupational welfare system in Korea faced crisis due to two major incidents. One is the IMP crisis which necessitates massive scale of restructuring of the general fabric of the Korean business and industry. There is little doubt that the economic crisis will surely cut down occupational welfare expenditure substantially. The other is a report released by the Korean Labor Research Institute which argus that there is no correlation between the Korean occupational welfare system and labor productivity. Thorough investigation of the Korean occupational welfare system suggests that current system is so outdated that it doesn't meet needs of the industrial workforce which, in turn, fails to enhance workers productivity. Consequently, a need for new paradigm and system arises and employee assistance program(EAP) emerges as a viable alternative. EAP is thoroughly delianeated of it's definition, motivations, functions, ingredients, historical background as well as cost-effectiveness. But major tasks center around an investigation and an analysis of it's applicability. In-depth analysis was carried out on the issue of it's indispensable natures and stumbling blocks on the way to lay it's root in the Korean industrial environment. It seems harder than the herculean task. However, EAP is not simply an alternative but is rather a pressing imperative for the present occupational welfare system in Korea which stands at the crossroad.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.205-217
• /
• 2008

The purpose of this study was to provide information on the development of an oral-health promotion program geared toward office workers. The subjects in this study were 240 employees at the headquarters of S construction company. After a survey was conducted in July and August 2008, the answer sheets from 208 respondents were gathered, and 191 answer sheets were analyzed except 17 unanalyzable ones. The findings of the study were as follows: 1. In regard to subjective oral health status, the largest number of the participants that accounted for 37.2% found their mouth to be neither healthy nor unhealthy. The greatest number of them that represented 58.1% had never visited a dentist's office to receive preventive treatment. 2. Regarding relationship between toothbrushing education experience and toothbrushing frequency, the most common toothbrushing frequency was three times a day( 46.5%) among the company employees who had ever received that education. In the event of the office workers without that experience, the most prevalent frequency was three times(63.6%). The toothbrushing frequency was statistically significantly different according to the toothbrushing education experience(p<0.05). As to the relationship of toothbrushing education experience to tooth- brushing method, the largest number(48.2%) of those who had ever received that education brushed their upper and lower teeth along with the gums by rotating the toothbrush downward from the top and upward from the bottom respectively. In the event of the office workers without that experience, 49.4 percent brushed their teeth and gums by rotating the toothbrush up and down. Thus, whether they had ever received education about toothbrushing made a statistically significant difference to their toothbrushing method(p<0.05). 3. As a result of evaluating their oral health belief by utilizing a five-point scale, they got a mean of 2.95. In each area of oral health belief, they got the best marks in benefit(3.66), salience(3.42), barrier(2.84), susceptility(2.58) and seriousness(2.23). Given the above-mentioned finding of the study, two sorts of oral health beliefs, which are benefit and salience, should be stressed in the development of oral health education programs that cater to company employees. And sustained research efforts should be channeled into finding out the relationship between oral health and actual oral health care.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1682-1694
• /
• 2007

There are a lot of factors working to facilitate the decline of Korea's traditional markets including large-scale discount stores, convenience stores, businesses of new types such as non-store retailing, and fiercer competitions among retail shops. The changes to the business environment are never favorable to them, either; the consumers have developed more diverse tastes and altered their purchasing styles; and the trading areas around traditional markets have withdrawn in size and power as new towns attract more businesses. In a word, every factor and situation seems to push traditional markets down the slope. Reacting to the problems, the Korean government enacted and enforced the "Special Law for the Promotion of Traditional Markets and Shopping Streets" to provide proper financial and management support. The shop owners of traditional markets formed merchants and prosperity associations and took various initiatives to increase the competitive edge of their traditional markets. All those efforts on the part of the government and the merchants, however, do not seem to be enough to revive traditional markets. This study set out to compare and analyze the management of shop owners of traditional markets based on the support projects by the government, to conduct an empirical research and analysis of their management conditions, and to suggest a better policy model by making improvements for the government's support system and making revisions to the current directions.

• Korean Security Journal
• /
• no.26
• /
• pp.121-144
• /
• 2011

The Framework Act on the Management of Disasters and Safety 2004(FAMDS) currently underpins Korean civil protection system, and under this FAMDS, Korean civil protection establishes a three-tiered government structure for dealing with crises and disasters: central government, provincial & metropolitan government, and local government tiers. In particular, the concept of Integrated Emergency Management(IEM) emphasizes that emergency response organizations should work and act together to respond to crises and disasters effectively, based on the coordination and cooperation model, not the command and control model. In tune with this trend, civil protection matters are, first, dealt with by local responders at the local level without direct involvement of central or federal government in the UK or USA. In other words, central government intervention is usually implemented in the UK and the USA, only when the scale or complexity of a civil protection issue is so vast, and thus requires a degree of central government coordination and support, resting on the severity and impact of the event. In contrast, it appears that civil protection mechanism in Korea has adopted a rigid centralized system within the command and control model, and for this reason, central government can easily interfere with regional or local command and control arrangements; there is a high level of central government decision-making remote from a local area. The principle of subsidiarity tends to be ignored. Under these circumstances, it is questionable whether such top-down arrangements of civil protection in Korea can manage uncertainty, unfamiliarity and unexpectedness in the age of Risk Society and Post-modern society, where interactive complexity is increasingly growing. In this context, the study argues that Korean civil protection system should move towards the decentralized model, based on coordination and cooperation between responding organizations, loosening the command and control structure, as with the UK or the USA emergency management arrangements. For this argument, the study basically explores mechanisms of civil protection arrangements in Korea under current legislation, and then finally attempts to make theoretical suggestions for the future of the Korean civil protection system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.451-468
• /
• 2021

Predicting hazardous ground conditions ahead of a TBM (Tunnel Boring Machine) tunnel face is essential for efficient and stable TBM advance. Although there have been several studies on the electrical resistivity survey method for TBM tunnelling, sufficient experimental data considering TBM advance were not established yet. Therefore, in this study, the laboratory-scale model experiments for simulating TBM excavation were carried out to analyze the applicability of an electrical resistivity survey for predicting hazardous ground conditions ahead of a TBM tunnel face. The trend of electrical resistivity during TBM advance was experimentally evaluated under various hazardous ground conditions (fault zone, seawater intruded zone, soil to rock transition zone, and rock to soil transition zone) ahead of a tunnel face. In the course of the experiments, a scale-down rock ground was provided using granite blocks to simulate the rock TBM tunnelling. Based on the experimental data, the electrical resistivity tends to decrease as the tunnel approaches the fault zone. While the seawater intruded zone follows a similar trend with the fault zone, the resistivity value of the seawater intrude zone decreased significantly compared to that of the fault zone. In case of the soil-to-rock transition zone, the electrical resistivity increases as the TBM approaches the rock with relatively high electrical resistivity. Conversely, in case of the rock-to-soil transition zone, the opposite trend was observed. That is, electrical resistivity decreases as the tunnel face approaches the rock with relatively low electrical resistivity. The experiment results represent that hazardous ground conditions (fault zone, seawater intruded zone, soil-to-rock transition zone, rock-to-soil transition zone) can be efficiently predicted by utilizing an electrical resistivity survey during TBM tunnelling.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.233-252
• /
• 2021

This paper is a study to improve the efficiency of mixing technology in the shield TBM chamber. Currently, the number of construction cases using the TBM method is increasing in Korea. According to the increasing use of TBM method, research on TBM method such as Disc Cutter, Cutter bit, and Segment also shows an increasing trend. However, there is little research on the mixing efficiency in chamber and chamber. In order to improve the smooth soil treatment and the behavior of the excavated soil, a study was conducted on the change of the mixing efficiency according to the effective mixing bar arrangement in the chamber. In the scale model experiment, the ground was composed using plastic materials of different colors for ease of identification. In addition, the mixing bar arrangement was different and classified into 4 cases, and the particle size distribution was classified into single particle size and multiple particle size, and the experiment was conducted with a total of 8 cases. The rotation speed of the cutter head of all cases was the same as 5 RPM, and the experiment time was also carried out in the same condition, 1 minute and 30 seconds. In order to check the mixing efficiency, samples at the upper, middle (left or right), and lower positions of each case were collected and analyzed. As a result of the scaled-down model experiment, the mixing efficiency of Case 4 and Case 4-1 increased compared to Case 1 and Case 1-1, which are actually used. Accordingly, it is expected that the mixing efficiency can be increased by changing the arrangement of the mixing bar in the chamber, and it is considered to be effective in saving air as the mixing efficiency increases. Therefore, this study is considered to be an important indicator for the use of shield TBM in Korea.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1061-1071
• /
• 2018

A subsea tunnel, being a super-sized underground structure must ensure safety at the time of earthquake, as well as at ordinary times. At the time of earthquake, in particular, of a subsea tunnel, a variety of response behaviors are induced owing to relative rigidity to the surrounding ground, or difference of displacement, so that the behavior characteristics can be hardly anticipated. The investigation aims to understand the behavior characteristics switched by earthquake of an imaginary subsea tunnel which passes through a fault zone having different physical properties from those of the surrounding ground. In order to achieve the aim, dynamic response behaviors of a subsea tunnel which passes through a fault zone were observed by means of indoor experiments. For the sake of improved earthquake resistance, a shape of subsea tunnel to which flexible segments have been applied was considered. Afterward, it is believed that a D/B can be established through 3-dimensional earthquake resistance interpretation of various grounds, on the basis of verified results from the experiments and interpretations under various conditions. The present investigation performed 1 g shaking table test in order to verify the result of 3-dimensional earthquake resistance interpretation. A model considering the similitude (1:100) of a scale-down model test was manufactured, and tests for three (3) Cases were carried out. Incident seismic wave was introduced by artificial seismic wave having both long-period and short-period earthquake properties in the horizontal direction which is rectangular to the processing direction of the tunnel, so that a fault zone was modeled. For numerical analysis, elastic modulus of the fault zone was assumed 1/5 value of the modulus of individual grounds surround the tunnel, in order to simulate a fault zone. Resultantly, reduced acceleration was confirmed with increase of physical properties of the fault zone, and the result from the shaking table test showed the same tendency as the result from 3-dimensional interpretation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.