• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.167-175
• /
• 2019

To effectively deal with the fire in tunnel which is mostly the vehicle fire, it's more important to suppress the fire at early stage. In urban tunnel, however, accessibility to the scene of fire by the fire fighter is very limited due to severe traffic congestion which causes the difficulty with firefighting activity in timely manner and such a problem would be further worsened in underground road (double-deck tunnel) which has been increasingly extended and deepened. In preparation for the disaster in Korea, the range of life safety facilities for installation is defined based on category of the extension and fire protection referring to risk hazard index which is determined depending on tunnel length and conditions, and particularly to directly deal with the tunnel fire, fire extinguisher, indoor hydrant and sprinkler are designated as the mandatory facilities depending on category. But such fire extinguishing installations are found inappropriate functionally and technically and thus the measure to improve the system needs to be taken. Particularly in a double-deck tunnel which accommodates the traffic in both directions within a single tunnel of which section is divided by intermediate slab, the facility or the system which functions more rapidly and effectively is more than important. This study, thus, is intended to supplement the problems with existing tunnel life safety system (fire extinguishing) and develop the remote-controlled automatic fire extinguishing system which is optimized for a double-deck tunnel. Consequently, the system considering low floor height and extended length as well as indoor hydrant for a wide range of use have been developed together with the performance verification and the process for commercialization before applying to the tunnel is underway now.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.249-255
• /
• 2023

Korean melon (Cucumis melo L.) is grown mostly in Northeast Asia area, and as a fruit mainly produced in Korea, the yield per unit area continues to improve, but the cultivation method is limited to soil cultivation, so it is necessary to develop hydroponic cultivation technology for scale and labor-saving is needed. As the ratio of NO₃^- increased, the plant height, the leaf length, the leaf width, and the internode length became longer and larger. On the other hand, the SPAD value decreased. The lower the ratio of NO₃^-, the faster the female flower bloom, and there was no difference in fruit maturity between treatments. There was no difference in the shape of fruit according to the ratio of NO₃^-, and the hardness was higher as the ratio of NO₃^- was lower. The total yield from March to July was KM3 5,650 kg/10a and KM1 4,439 kg/10a, 27% higher in KM3 and, in particular, 36% higher in quantity from March to May, when Korean melon prices were high season. Therefore, it was judged that it would be appropriate to supply NO₃^- suitable for hydroponic cultivation of Korean melon, which was formalized in December and produced from spring, at the level of 6.5 to 10 me·L^-1.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.197-210
• /
• 2003

The non-float midwater pair trawl was effective in the mouth opening and control of the working depth in midwater and bottom. In contrast, we confirmed that it was difficult to keep the net at surface above 30 m of the depth by means of the full scale experiment in the field and the model test in the circulation water channel. To solve this problem, the kites were attached to the head rope of the non-float midwater pair trawl. In this study, four kinds of the model experiments were carried out with the purpose of applying the kite to the korean midwater pair trawl. The results obtained can be summarized as follows: 1. The working depth of the non-float midwater pair trawl with the kite was shallower than that of the proto type and non-float type. The working depth of the kite type was approximately 20m with 2 kites and about 5m with 4 kites under 4.0 knot. The working depth was almost constant but the depth of the head rope sank approximately 15m and 10m according to the increase in the front weight and the wing-end weight, respectively. The changing aspect of the working depth was constant, but the depth of the head rope sank approximately 22m according to the increase in the lower warp length (dL). 2. The hydrodynamic resistance of the kite type was almost increased in a linear form in accordance with the flow speed increase from 2.0 to 5.0 knot. The increasing grate of the hydrodynamic resistance tended to increase in accordance with the increase in flow speed. The hydrodynamic resistance of the kite type was larger approximately 5～10 ton larger than that of the non-float type and the proto type. The hydrodynamic resistance of the kite type increased approximately 3ton with the changing of the front weight from 1.40 to 3.50 ton and approximately 4 ton with the changing of the wing-end weight from 0 to 1.11 ton and approximately 5.5 ton with the changing lower warp length (dL) from 0 to 40 m, respectively. 3. The net height of the kite type was increased approximately 10 m with the change in the kite area from $2,270mm^2$ to 4,540 $\textrm{mm}^2$. The net height of the kite type was aproximately 50 m and 30 m larger than that of the proto type and the non-float type, respectively. The changed aspect of the net width was approximately 5m with the variation of the flow speed from 2.0 to 5.0 knot. 4. The filtering volume of the kite type was larger than that of the proto type and the non-float type by 28%, 34% at 2.0 knot of the flow speed and 42%, 41% at 3.0 knot, and 62%, 45% at 4.0 knot, and 74%, 54% at 5.0knot, respectively. The optimal towing speed was approximately 3.0 knot for the proto type and was over 4.0 knot for the non-float type, and the optimal towing speed reached 5.0 knot for the kite type. 5. The opening efficiency of the kite type was approximately 50% and 25% larger than that of the proto type and the non-float type, respectively.

• 한국사회복지학회:학술대회논문집
• /
• 2003.10a
• /
• pp.185-216
• /
• 2003

This study was aimed at investigating important factors influencing career success among regular workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. At the same tune, two hypothetical path models established by the researcher were examined using linear multiple regression methods and the LISREL. After examining the differences among the factors of career success, a comparison was made between the disabled worker group and the non-disabled worker group. A questionnaire using the 5-point Likert scale was distributed to a group of 374 workers with disabilities and 463 workers without disabilities. For the data analysis purpose, the structural equation model, factor analysis, correlation analysis, and multiple regression analysis were carried out. The results of this study ran be summarized as follows. First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. A three-factorial model revealed categories of personal, family, and organizational factor respectively. The personal factor was composed of the self-esteem and self-efficiency. The family factor was consisted of the multi-roles stress and the number of children. Finally, the organizational factor was composed of the capacity for utilizing resources, networking, and the frequency of mentoring. In addition, the total 10 sub areas of career success were divided by two important aspects; the subjective career success and the objective career success. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. For the disabled worker group, the turnover rate was differently influenced by the type of occupation, the length of working years, while multi-role stress and the average working years at the time of turnover for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In the second model, the Chi-square, the degree of freedom (($x^2=64.950$, df=61, P=0.341), and the adjusted Goodness of Fit Index (AGFI) were .964, and the Comparative Fit Index (CFI) were .997, and the Root Mean Squared Residual (RMR) was respectively. .038. The model was best fitted and could predict the career success more highly because the goodness of fit index in the whole models was within the allowed range. In conclusion, the following research implications can be suggested. First, the occupational type of research participants was one of the most important variables to predict the career success for both research participant groups. It means that people with disabilities require human development services including education. They need to improve themselves in this knowledge-based society. Furthermore, for maintaining the career success, people with disabilities should be approached by considering the subjective career success aspects including wages and the promotion opportunities than the objective career success aspects.

• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.255-264
• /
• 2012

The stabilization using limestone ($CaCO_3$) and steel making slag as the immobilization amendments for Cu and Pb contaminated farmland soils was investigated by batch tests, continuous column experiments and the pilot scale feasibility study with 4 testing grounds at the contaminated site. From the results of batch experiment, the amendment with the mixture of 3% of limestone and 2% of steel making slag reduced more than 85% of Cu and Pb compared with the soil without amendment. The acryl column (1 m in length and 15 cm in diameter) equipped with valves, tubes and a sprinkler was used for the continuous column experiments. Without the amendment, the Pb concentration of the leachate from the column maintained higher than 0.1 mg/L (groundwater tolerance limit). However, the amendment with 3% limestone and 2% steel making slag reduced more than 60% of Pb leaching concentration within 1 year and the Pb concentration of leachate maintained below 0.04 mg/L. For the testing ground without the amendment, the Pb and Cu concentrations of soil water after 60 days incubation were 0.38 mg/L and 0.69 mg/l, respectively, suggesting that the continuous leaching of Cu and Pb may occur from the site. For the testing ground amended with mixture of 3% of limestone + 2% of steel making slag, no water soluble Pb and Cu were detected after 20 days incubation. For all testing grounds, the ratio of Pb and Cu transfer to plant showed as following: root > leaves(including stem) > rice grain. The amendment with limestone and steel making slag reduced more than 75% Pb and Cu transfer to plant comparing with no amendment. The results of this study showed that the amendment with mixture of limestone and steel making slag decreases not only the leaching of heavy metals but also the plant transfer from the soil.

• Journal of Plant Biotechnology
• /
• v.41 no.2
• /
• pp.81-88
• /
• 2014

Salt cress (Thellungiella halophila or Thellungiella parvula), species closely related to Arabidopsis thaliana, represents an extremophile adapted to harsh saline environments. To isolate salt-tolerance genes from this species, we constructed a cDNA library from roots and leaves of salt cress plants treated with 200 mM NaCl. This cDNA library was subsequently shuttled into the destination binary vector [driven by the cauliflower mosaic virus (CaMV) 35S promoter] designed for plant transformation and expression via recombination- assisted cloning. In total, 305,400 pools of transgenic BASTA-resistant lines were generated in Arabidopsis using either T. halophila or T. parvula cDNA libraries. These were used for functional screening of genes involved in salt tolerance. Among these pools, 168,500 pools were used for primary screening to date from which 7,157 lines showed apparent salt tolerant-phenotypes in the initial screen. A secondary screen has now identified 165 salt tolerant transgenic lines using 1,551 (10.6%) lines that emerged in the first screen. The prevalent phenotype in these lines includes accelerated seed germination often accompanied by faster root growth compared to WT Arabidopsis under salt stress condition. In addition, other lines showed non-typical development of stems and flowers compared to WT Arabidopsis. Based on the close relationship of the tolerant species to the target species we suggest this approach as an appropriate method for the large-scale identification of salt tolerance genes from salt cress.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.51-60
• /
• 2014

In this study, ICT medical service provider's level of knowledge fire fighting safety and methods on coping with fires in the regions of Gwangju and Jeonam Province of Korea were investigated to determine the elements affecting such levels and provide basic information on the manuals for educating how to cope with the fire fighting safety in medical facilities. The data were analyzed using SPSS Win 14.0. The scores of level of knowledge fire fighting safety of ICT medical service provider's were 7.06(10 point scale), and the scores of level of recognizing how to cope with fire fighting safety were 6.61(11 point scale). level of recognizing how to cope with fire fighting safety were significantly different according to gender(t=4.12, p<.001), age(${\chi}^2$=17.24, p<.001), length of career(${\chi}^2$=22.76, p<.001), experience with fire fighting safety education(t=6.10, p<.001), level of subjective knowledge on fire fighting safety(${\chi}^2$=53.83, p<.001). In order to enhance the level of understanding of fire fighting safety and methods of coping by the ICT medical service providers it is found that: self-directed learning through avoiding the education just conveying knowledge by lecture tailored learning for individuals fire fighting education focused on experiencing actual work by developing various contents emphasizing cooperative learning deploying patients by classification systems using simulations and a study on the implementation of digital anti-fire monitoring system with multipoint communication protocol, a design and development of the smoke detection system using infra-red laser for fire detection in the wide space, video based fire detection algorithm using gaussian mixture mode developing an education manual for coping with fire fighting safety through multi learning approach at the medical facilities are required.

• Parasites, Hosts and Diseases
• /
• v.22 no.1
• /
• pp.1-10
• /
• 1984

This study was performed to observe the chronological changes in the tegumental structure of M. yokogawai using scanning electron microscope. The subjected worms were encysted metacercariae obtained from the sweetish, and 2-day, 1-week and 4-week old worms experimentally reared in albino rats. The results are as follows: 1. The tegument of encysted metacercariae showed many transverse shallow rugae, which were more remarkable in posterior half body, i.e., posterior to ventral sucker. The whole surface was armed with many scale-like spines; 7~8 pointed ones on anterior body and 2~3 pointed on posterior body. The ciliated knob-like papillae (Type I) were abundant around oral and ventral suckers, which grouped 2, 3 or 4 in number in most cases. A few round swellings of tegument(Type lI were observed only on oral sucker. 2. The tegumental surface of 2-day old worms showed deeper rugae, and the anterior half covered with knob-like processes of distal cytoplasm and the posterior half with cobblestone-like ones. Interspinous space became more wide and 9 pointed spines appeared on anterior dorsal surface. The sensory papillae enlarged but not changed in their distribution. 3. The tegument of 1-week old worms revealed knob-like cytoplasmic processes in posterior half body and velvety ones around oral sucker. The scale-like spines of anterior half body changed remarkably to the slender ones of posterior body at the level of ventral sucker. In dorsal surface, the arrangement of the Type I papillae were bilaterally symmetrical. 4. The tegument of 4-week old worms were finely differentiated and the posterior tegument covered with velvety cytoplasmic processes. The spines had remarkably grown in length and width but the density remained nearly unchanged. The papillae also became larger but their morphology and distribution were not different from younger worms. However, the round elevation of cytoplasmic ridges (Type III papilla) appeared bilaterally on inner wall of oral sucker, approximately 8 in number. From the above results, it is considered that the tegument of juvenile iH. yokogawai continued to differentiate until 4 weeks after infection.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.169-181
• /
• 1990

The development of eggs and larvae, and minute scale-like tubercles on the skin surface of larval Acantlaorhodeus gracilis from Korea were observed. They spawned from late March through the middle of June. A fish spawned at least 5 times and the number of eggs averaged 304 per oviposition. Unfertilized eggs are nearly ovoid-shaped(mean$\pm$SD=$2.09{\pm}0.04\;mm$ in length with range of 2.05 to 2.13 mm and mean$\pm$SD=$1.26{\pm}0.02\;mm$ in breadth with range of 1.24 to 1.30 mm measured for the 50 eggs) and opaque yellow color. The tip of egg membrane at the animal pole side swelled and formed a few hilly projections. The shape of the eggs was just like a loquat. Most of embryos began to hatch out in thirty-eight hours after insemination at $22{\pm}1^{\circ}C$ in water temperature. As regards the morphological characters of the eggs and larval development, Acan. gracilis was similar to Acan. asmussi, Acheilognathus rhombeus, A. longipinnis and Pseudoperilampus typus. The larvae of this species is unique particularly in the following two characters, i.e., 1) scale-like tubercles ellipsoided in a diagonal cross section on the whole body and 2) incessant wiggly movement pattern as that of fly maggot, with the larvae of the above mentioned species. These characters seem to reflect the phylogenetic relationships among acheilognathine fishes. On the other hand, this species and Acan. asmussi are spring-summer spawning bitterlings. And also these species never retard the larval growth in such larval stage as the duration from Stage B to Stage D.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.620-637
• /
• 2008

$Che{\breve{o}}n$ (提堰) refers to the irrigation facilities used to provide water to the land on which rice is farmed. As the maintenance of $Che{\breve{o}}n$ required great amounts of capital, labor, and technology, the construction and maintenance of such facilities was controlled by the government. $Che{\breve{o}}n$ was perceived as being of particular importance during the $Che{\breve{o}}n$ era, which adopted agriculture as the basis of state management. Therefore, the management of $Che{\breve{o}}n$ was considered to be one of the main state policies. This is why $Che{\breve{o}}n$-related records can often be found in the historical documents written during the $Che{\breve{o}}n$ era. As such historical documents in the form of Jiriji (地理誌, geographical descriptions) include detailed descriptions of the number, size, and location of $Che{\breve{o}}n$ in individual counties($kunby{\breve{o}}n$), these help to conduct comprehensive analysis of the state of $Che{\breve{o}}n$ during the $Che{\breve{o}}n$ era. Based on these facts, this study attempts to establish a database of the $Che{\breve{o}}n$-related contents included in the <$Y{\breve{o}}jitos{\breve{o}}$(與地圖書)> published during the latter period of $Che{\breve{o}}n$, and using the established database, to identify the regional characteristics of $Che{\breve{o}}n$. More precisely, by analyzing the state of the distribution of $Che{\breve{o}}n$ at the national level, an effort was made to review the regional characteristics of $Che{\breve{o}}n$ in terms of their distribution and of the natural geographical conditions found in the locales where $Che{\breve{o}}n$ were located, as well as of the interrelation between such $Che{\breve{o}}n$ and socioeconomic factors such as the scale of the population and the size of the area under cultivation. Other factors which were delved into included matters related to the size of $Che{\breve{o}}n$ such as their perimeter, length, and scale of the area which they irrigated, the characteristics of the locales where $Che{\breve{o}}n$ were located, and the regional differences in the characteristics of $Che{\breve{o}}n$.