• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.589-601
• /
• 2016

The hybrid grid was adopted and numerical prediction analysis of propeller unsteady bearing force considering free surface was performed for mode and full-scale KCS hull-propeller-rudder system by employing RANS method and VOF model. In order to obtain the propeller velocity under self-propulsion point, firstly, the numerical simulation for self-propulsion test of full-scale ship is carried out. The results show that the scale effect of velocity at self-propulsion point and wake fraction is obvious. Then, the transient two-phase flow calculations are performed for model and full-scale KCS hull-propeller-rudder systems. According to the monitoring data, it is found that the propeller unsteady bearing force is fluctuating periodically over time and full-scale propeller's time-average value is smaller than model-scale's. The frequency spectrum curves are also provided after fast Fourier transform. By analyzing the frequency spectrum data, it is easy to summarize that each component of the propeller bearing force have the same fluctuation frequency and the peak in BFP is maximum. What's more, each component of full-scale bearing force's fluctuation value is bigger than model-scale's except the bending moment coefficient about the Y-axis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.380-391
• /
• 2014

In this study, the scale effect on the performance of the podded propeller of tractor type is investigated. Turbulent flow computations are carried out for Reynolds numbers increasing progressively from model scale to full scale using the CFD analysis. The result of the flow calculation for model scale Reynolds numbers agrees well with that of the experiment of a large cavitation tunnel. The existing numerical analysis indicates that the performance of the podded propeller blades is mainly influenced by the advance coefficient and relatively little by the Reynolds number. However, the drag of pod housing with propeller in operation is different from that of pod housing without propeller due to the acceleration and swirl of propeller slipstream which is altered by propeller loading as well as the pressure recovery and friction according to Reynolds number, which suggests that the pod housing drag under the condition of propeller in operation is the key factor of the scale effect on the performance between model and full scale podded propellers. The so called 'drag ratio', which is the ratio of pod housing drag to total thrust of podded propeller, increases as the advance coefficient increases due to accelerated flow in the slipstream of the podded propeller. However, the increasing rate of the drag ratio reduces continuously as the Reynolds number increases from model to full scale progressively. The contribution of hydrodynamic forces, which acts on the parts composed of the pod housing with propeller operating in various loading conditions, to the thrust and the torque of the total propeller unit are presented for a range of Reynolds numbers from model to full scales.

• 해양환경안전학회지
• /
• 제27권4호
• /
• pp.538-549
• /
• 2021

본 연구에서는 Froude 수 1.0으로 운항하는 길이 약 10m 급 소형 고속선박의 에너지 효율 설계를 위해 선미부에 트림 탭을 부착하였고, 선저 면과의 각도에 따른 항주자세와 저항성능의 변화를 살펴보았다. 성능 해석은 CFD 해석을 통해 수행되었으며, 축척에 의한 영향을 보기 위해 모형선과 실선에 대해 각각 해석을 수행 후 두 결과로부터 예측된 실선의 성능을 비교하였다. 나선에 대한 해석 결과는 두 결과가 전반적으로 유사하였고, 트림 탭이 부착된 경우 선저 면과의 각도가 동일할 때 자세 변화량이 달라 전 저항의 차이로 이어졌지만 자세에 따른 저항 변화 경향은 유사하였다. 이로부터 축척 효과가 있더라도 저항 저감 경향으로부터 최적 항주자세를 찾을 수 있으나, 트림 탭에 의한 자세 변화와 실선 주위 유동의 특성을 알기 위해서는 실선에 대한 직접적인 해석이 필요함을 알 수 있다.

• 한국생활과학회지
• /
• 제24권6호
• /
• pp.783-793
• /
• 2015

The purpose of this study was to investigate the effect of Parenting Attitude, Self-esteem, and Peer Attachment on Emotion Problem. The study is based on data from first wave of 'Korean Child Youth Panel Survey 2010(KCYPS)' and the subjects of this survey were 2,098 1st grade junior middle school students. To measure the variables, this study used such scales as the parenting attitude scale, self-esteem scale, and peer attachment scale and emotional problem scale. The data were analyzed using descriptive statistics, Pearson's correlation and structural equation modeling analysis. Results of structural equation modeling with data indicated that hypothesized structural equation model produced a good fit but, no direct effect between negative parenting attitude and peer attachment. The self-esteem have mediating effect between parenting attitude and peer attachment, emotion problem. The peer attachment have mediating effect between positive parenting attitude and emotion problem but, did not have mediating effect between negative parenting attitude and emotion problem. The implications for counseling and suggestions for future research are discussed.

• 한국표면공학회지
• /
• 제21권2호
• /
• pp.53-67
• /
• 1988

The high temperature corrosion of Fe-C alloys were studied at I atm SO gas in the temperature range 500~80$0^{\circ}C$ by means of a thermogravimetric analysis. The Na2SO4 induced high tempwrature corrosion rate was also measured at atm O2 gas under above the temperature renge. The reaction products were identified with the aid of X-ray diffraction technique, and micostruction of the alloy/scale interface was observed with a optical microscope and SEM. The experimental results were disussed by the themodeynamic calcutions. Under above the experimental condition. the reaction rates decrbon with increasing carbon content. The transfer of Fe ion was limited by a residue of carbon precipitated at alloy scale interface due to the oxidation of Fe-C alloys at alloy surface. The effect of cold working on reaction rate was different between the Fe containing low carbon and Fe-C Alloy containing carbon above 0,73 wt%. In a cold worked iron containing low carbon content, the crystallization of metal surface leads to the poor adherence between the alloy and the cavity formed between the alloy and scale. The outward diffusion of ion through the scale is estimated to be hindered by the cavity formed between the scale, consequently decreasing reaction rate. In the case Fe-C containing carbon above 0.73 Wt% alloy, the reaction rate was little affected by cold working, because the effect of content on reaction rats is greater than the effect of cold working.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권5호
• /
• pp.99-109
• /
• 2022

The main reason for the increase in cross-border mergers and acquisitions in developed and emerging countries is globalization and growing economic interdependence across countries. The state of the economy has a significant impact on whether cross-border mergers and acquisitions are encouraged or discouraged by international strategic capital market changes. This study empirically evaluates the influence of determinants of economic development on the scale effect of Cross Border M&As separately on emerging and developed nations as a research gap. We first separated the small and large scale firms based on companies' worth and used panel regression to analyze the impact of GDP, employment rate, and market capitalization on cross-border merger & acquisition deals over the period of 2008-2018. Results indicate that GDP and market capitalization have a positive effect on CBM&A, whereas employment rate has a negative effect on CBM&A deals in large-scale firms of both emerging and developed countries. This study results offer the implication for the potential investors and policymakers to strategically analyze the implementation of cross-border mergers & acquisitions.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.53-57
• /
• 2014

In the fields of reliability application, the most commonly used test methods for reliability demonstration are zero-failure acceptance tests since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. For products with lognormal lifetime distribution, the value of scale parameter is usually assumed to be known in designing reliability demonstration tests. It is important to select correct values of scale parameters to guarantee the specified reliability with given confidence level exactly. The effect of using wrong values of scale parameters in designing reliability demonstration test for products with lognormal lifetime distribution is examined and selecting proper values of scale parameters for conservative reliability demonstration is discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.967-987
• /
• 2020

A numerical analysis is carried out for the marine propellers in open water conditions to investigate the effect of the wall treatments in model and full scale. The standard wall function to apply the low of the wall and the two layer zonal model to calculate the whole boundary layer for a transition phenomenon are used with one turbulence model. To determine an appropriate distance of the first grid point from the wall when using the wall function, a formula based on Reynolds number is suggested, which can estimate the maximum y+ satisfying the logarithmic law. In the model scale, it is confirmed that a transition calculation is required for a model scale propeller with low Reynolds number that the transient region appears widely. While in the full scale, the wall function calculation is recommended for efficient calculations due to the turbulence dominant flow for large Reynolds number.

• 자원ㆍ환경경제연구
• /
• 제11권2호
• /
• pp.233-260
• /
• 2002

This paper tries to analyze the efficiency structure and regulatory effects in electric power industry by using total factor productivity and indices based on cost function method. This paper performed an empirical analysis on the efficiency improvement and optimal scale taking the cost aspect in electricity industry into account. By expanding the cost structure framework, this paper proposes the analytical method regarding the needs of technology regulation and presents the empirical results which can be verified. Hence, this work can play a key role in decision-making of the national power development and regulatory policy. The empirical result indicates that the electricity industry in Korea has been in the state of economies of scale until 1980s, However, due to sustained growth of power generation, economies of scale declined and subsided after 1980s and then diseconomies of scale is shown recent years. The analysis on the effect of technology regulation shows the national large-scale base-load power plant development-oriented policy until so far contributed substantial cost effect to the electricity industry. The empirical result indicates that the reserve requirement as one of means of technology regulation policy did not contribute to the economies of scale but positive effect on the total factor productivity in Korea.

• 대한정형도수물리치료학회지
• /
• 제13권2호
• /
• pp.79-84
• /
• 2007

Purpose: The data was performed to evaluate the effect of conservative treatment in 30 patients aging from 21 to 71 with lumbar back pain. Methods: The effect of conservative treatment was analyzed with use of pain behavior scale, pain self assessment scale by Million Index in according to age, occupation, duration of symptom, symptom. Results: The occupation were desking job 43.4%, standing job 33.3%, house wife 23.3%. Duration of symptoms in over 2-5 months was 40.0%. The pain in below 1 months, classified by duration of symptoms, was reduced from 2.1 to 3.0 in pain behavior scale, 6.0 to 2.2 in pain self assessment scale(p<0.05). The pain in only lumbar back pain, classified by symptoms, was reduced from 2.0 to 3.0 in pain behavior scale, 6.6 to 2.4 in pain self assessment scale(p<0.05). Conclusion: The pain in over 9 months. classified by duration of physical therapy, was increase 2.0 in pain behavior scale, 4.0 in pain self assessment scale (p<0.05).